Powder Metallurgy
Mostrando 1-12 de 101 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. Obtaining Composites Powders of Al2 O3 / Ni and Al2 O3 / Nb by Mechanical Alloying
Mechanical alloying (MA) can be highlighted among the various methods and powder processing forms, which consists of producing homogeneous materials from elementary powders. This process is of paramount importance as it has the ability to reduce the particle size of the powders and can often promote bonding between elements which have low interaction and wet
Mat. Res.. Publicado em: 14/10/2019
-
3. Characterization of Ti-35Nb alloy surface modified by controlled chemical oxidation for surgical implant applications
ABSTRACT Titanium-Niobium alloys have been studied for biomedical applications due to their satisfactory biocompatibility. In order to improve the long-term implantation, surface modification techniques have been developed to generate suitable topography, roughness, chemical composition, surface energy, etc. Considering this approach, the present work aimed
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Comparison of Aluminum Based Alloys Reinforced with Intermetallic Developed by Powder Metallurgy and Arc Melting Routes
Abstract In this work, Al-Ti alloys were prepared using metallic powders of Al and Ti via Powder Metallurgy (PM) and Arc Melting (AM) route. Four chemical compositions including pure aluminum were studied. Metallic powders were mixed with three compositions, Al-5Ti, Al-10Ti and Al-10Ti-2SiC. All the compositions were in atomic percentage. In case of PM, samp
Soldag. insp.. Publicado em: 29/08/2019
-
5. Analysis of the densification of a composite obtained by sintering process of aluminum bronze powders with different carbides
Abstract Aluminum bronze alloy is applied in environments that require materials of high mechanical resistance and wear, such as marine, oil & gas and aerospace ones. This study analyzes the densification of composites based on aluminum bronze with additions of the vanadium (VC) and niobium (NbC) carbides, and the influence of these carbides in the milling e
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
6. Semi-solid Sintering of Ti6Al4V/CoCrMo Composites for Biomedical Applications
A composite of Ti6Al4V reinforced with CoCrMo particles is fabricated by conventional powder metallurgy and semi-solid sintering. Composites are fabricated by mixing 20% wt. of CoCrMo reinforcing particles into the Ti6Al4V matrix. Sintering is studied by dilatometry tests between 1050 and 1130 °C and compact characterization is performed by SEM and XRD. Mic
Mat. Res.. Publicado em: 31/01/2019
-
7. Development of a microwave absorbing material based on molybdenum-doped niobium pentoxide
Abstract This work aimed to perform the characterization of electrical properties of niobium pentoxide, Nb2O5, pure and doped with molybdenum, prepared by powder metallurgy route and to do a comparative analysis of the influence of this material when sintered in a muffle or in a microwave oven. The results showed that the doping of the niobium pentoxide with
Cerâmica. Publicado em: 2019-01
-
8. Study on Effect of EAFD Particulate Reinforcement in AA7075 Aluminum Matrix Composites
Eletric arc furnace dust is dangerous solid waste that is generated in steel manufacturing processes. The utilization of the dust from these industries avoids disposing it into industrial waste landfills and saves costs. In this study, an attempt has been made to fabricate aluminum matrix composites reinforced with EAFD particulate, throught the conventional
Mat. Res.. Publicado em: 13/09/2018
-
9. Fabricación de espumas de cobre por pulvimetalurgia
ABSTRACT A method for the fabrication of copper foams by powder metallurgy, employing carbamide beads as space holders, is presented. These are removed by water dissolution before sintering the compact. The method allows for a precise control of the cell characteristics (size, shape and distribution) within an interconnected porosity. The use of metal powder
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Obtención de compuesto de titanio con gradiente de porosidad mediante técnica pulvimetalúrgica
ABSTRACT Within the study of biomaterials for implantological use titanium is among the most widely employed metals due to its excellent corrosion and mechanical resistance. In spite of the advances made, there are some issues remaining with the value of the elastic moduli of the titanium (110GPa) in comparison with the elastic moduli of the cortical bone (2
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. Estructuras de titanio con gradiente de porosidad – fabricación por el método de partículas espaciadoras y caracterización
ABSTRACT It has proposed the use of porous titanium to reduce the problem of mechanical incompatibility, which occurs between such material used in implants and bone. The pores introduction in titanium decreases its elastic modulus by bringing it closer to that of both cortical and trabecular bones. This paper describes titanium fabrication by powder metallu
Matéria (Rio J.). Publicado em: 19/07/2018
-
12. Manufacturing of Cu-Sn foams through SDP
ABSTRACT This work reports the processing of bronze foams manufactured by using the powder metallurgy method known as Sintering Dissolution Process. During the sintering step, a device with controlled atmosphere separated from the heating furnace was employed to avoid the quick oxidation of metal particles. The device allows to control its internal atmospher
Matéria (Rio J.). Publicado em: 19/07/2018