Polymer Composites
Mostrando 1-12 de 226 artigos, teses e dissertações.
-
1. Graphite-Polyurethane Composite Electrode Modified with Molecularly Imprinted Polymer for Determination of Diclofenac
A molecularly imprinted polymer (MIP) was prepared using the anti-inflammatory diclofenac (DCF) as a template. A non-imprinted polymer (NIP) was also prepared as a control. These MIP and NIP were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET), revealing a higher porosity in the fir
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
2. Weathering Resistance of Waterborne Polyurethane Coatings Reinforced with Silica from Rice Husk Ash
Abstract: Waterborne polyurethanes (WPUs) are interesting materials for coatings when compared to solvent-based polyurethanes, once that reducing the concentration of volatile organic compounds that are harmful for human health and the environment. However, the WPU has low weathering resistance. In order to improve this behavior among others properties, ino
An. Acad. Bras. Ciênc.. Publicado em: 25/11/2019
-
3. Study of the Moisture Absorption in Polymer Composites Reinforced with Vegetal Fiber Using Langmuir’s Model
This work aims to numerically study the moisture absorption in polymer composites reinforced with vegetal fiber, using the diffusive model of Langmuir, which considers the existence of water molecules inside the material free to diffuse and adsorb at the capillaries walls, in the solid. A three-dimensional and transient mathematical modelling to describe the
Mat. Res.. Publicado em: 11/11/2019
-
4. Preparation of Syntactic Foams made from Green Polyethylene and Glass Microspheres: Morphological and Mechanical Characterization
Polymeric syntactic foams are composites made from the mixture of Hollow Glass Microspheres (HGM) and polymer matrices. One of their main characteristics is their low density and the production of these composites using a matrix derived from renewable sources potentiates their development without neglecting sustainability. In this paper , the properties of H
Mat. Res.. Publicado em: 11/11/2019
-
5. Surface Silanization of Graphene Oxide Under Mild Reaction Conditions
The functionalization of graphene oxide with organosilanes is an important strategy to yield graphene-silica composites as well as to create nanomaterials for use as reinforcement in polymer nanocomposites and corrosion-inhibiting coatings for metals, among other uses. However, depending on the reaction conditions used, the organosilanes tend to self-condens
J. Braz. Chem. Soc.. Publicado em: 24/10/2019
-
6. Gold Nanoparticles and [PEDOT-Poly(D,L-Lactic Acid)] Composite: Synthesis, Characterization and Application to H2O2 Sensing
Biocompatible electrochemical devices are challenging to develop due to the toxicity of many advanced electrode materials and the difficulty to degrade the discarded material. Few recent advances were made in the synthesis of conducting biodegradable composites of polymers for electrode materials. In this article we describe the synthesis of two new inorgani
J. Braz. Chem. Soc.. Publicado em: 21/10/2019
-
7. Evaluation of Dynamic Mechanical Properties of Fique Fabric/Epoxy Composites
The fique is a plant typical of the Colombian Andes, from which relatively common items are fabricated. One of these is woven fabric extensively applied in sackcloths. The mechanical strength of fique fabric have motivated recent investigations on possible reinforcement of polymer matrix composites. For this purpose its thermo-mechanical behavior was unveile
Mat. Res.. Publicado em: 14/10/2019
-
8. Grafting polypropylene over hollow glass microspheres by reactive extrusion
Abstract Hollow glass microspheres HGM are light, round, hollow, hydrophilic microspheres used to produce polyolefin composites with reduced density. To maintain mechanical strength, it is necessary to improve the adhesion between the polymer matrix and the microspheres, which is done by a compatibilizer. For polypropylene composites a maleic anhydride graft
Polímeros. Publicado em: 10/10/2019
-
9. Influence of coupling agents on the adhesion force of dissimilar overmolded polymers: a digital image correlation analysis
ABSTRACT The increase in the technical and functional requirements of plastic items has led the development of multimaterials. To achieve a good performance in the adhesion of dissimilar materials, in this case, polypropylene and coconut fiber composites, it is fundamental to understand the phenomena related to the specific interface. This work aims to evalu
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. Avaliação da morfologia e propriedades mecânicas de compósitos laminados a base de epóxi, cortiça e microesferas de vidro
RESUMO Neste trabalho foram desenvolvidos compósitos poliméricos epoxídicos laminados a base de cortiça e microesferas ocas de vidro. Os compósitos laminados foram confeccionados manualmente e avaliados quanto às características morfológicas em microscópio eletrônico de varredura e a influência da incorporação das cargas foi avaliada por meio da
Matéria (Rio J.). Publicado em: 16/09/2019
-
11. Comportamento térmico de compósitos de poliestireno reciclado reforçado com celulose de bagaço de cana
RESUMO O poliestireno expandido (EPS) é um polímero reciclável amplamente utilizado na fabricação de embalagens para isolamento acústico, proteção de bens de consumo duráveis e na indústria da construção civil. O PS é facilmente reciclável com o aumento da temperatura, podendo dar origem a novos materiais. Entretanto suas propriedades térmicas
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Influence of the incorporation of triclosan methacrylate on the physical properties and antibacterial activity of resin composite
Abstract The incorporation of antimicrobials in the composites as an attempt to reduce bacterial adhesion without jeopardizing mechanical properties is a challenge for Dentistry. Objective: To evaluate the bacterial adhesion and physical properties of a composite containing the methacrylate triclosan- derivative monomer (TM). Methodology: TM was synthesize
J. Appl. Oral Sci.. Publicado em: 09/09/2019