Plastic Composite
Mostrando 1-12 de 50 artigos, teses e dissertações.
-
1. MECHANICAL AND PHYSICAL PROPERTIES OF WOOD/POLYETHYLENE COMPOSITE REINFORCED WITH TIO2 NANOPARTICLES
ABSTRACT Wood plastic composite was fabricated using high density polyethylene and pine wood fiber. The effect of addition of TiO2 nanoparticles at different weight fractions (0%, 1%, 3%, and 5%) on some properties of the composite was examined. The experimental composites were tested for bending strength, tensile strength, Izod impact strength, thickness sw
CERNE. Publicado em: 2020-12
-
2. DESENVOLVIMENTO DE METODOLOGIA DE REVELAÇÃO DE IMPRESSÃO DIGITAL LATENTE COM CHALCONAS
Fingerprints are unique for each individual contributing to human identification in forensic cases. Visualization of latent fingerprints usually involves the use of a chemical substance that creates a contrast between fingerprint residues and the surface on which the print was deposited. Commercial powders used as fingerprint developers by papilloscopy have
Quím. Nova. Publicado em: 21/10/2019
-
3. Multi-scale representation of plastic deformation in fiber-reinforced materials: application to reinforced concrete
Abstract Here we present a multi-scale model to carry out the computation of brittle composite materials reinforced with fibers, and we show its application to standard reinforced concrete. The computation is carried out within an operator-split framework on the macro-scale, which allows for different failure mechanisms to develop in separate phases, as both
Lat. Am. j. solids struct.. Publicado em: 12/08/2019
-
4. Determinación de la tenacidad a la fractura J en laminados fibra-metal del tipo CARALL con láminas de aluminio 6061 y 1050
ABSTRACT Determination of fracture toughness in hybrid composites, fiber-metal laminates, FML (Fiber Metal Laminates) is very important to perform an analysis of structural integrity to estimate damage tolerance and residual strength of the material against the propagation of a crack This evaluation should be done in both naval and aircraft structures using
Matéria (Rio J.). Publicado em: 19/07/2018
-
5. Mechanical characterization of PM aluminum composites by small punch test
ABSTRACT In this work Small Punch Test (SPT) was applied to study the mechanical behavior of ultrafine-grained Al-Al2O3metal matrix composites (MMCs) fabricated in situ via powder metallurgy route (HITEMAL®). Such MMCs show attractive mechanical properties, enhanced creep performance and increased thermal stability at elevated temperatures, not normally ass
Matéria (Rio J.). Publicado em: 19/07/2018
-
6. Preparation and characterization of composites from plastic waste and sugar cane fiber
Abstract This study presents the preparation and characterization of composite materials using Plastic Waste from Hydrapulper (PWH) from paper industries extruded with sugar cane fiber residues from ethanol industries. The factorial design showed that composite material with 40% of sugar cane fiber, pressed with 5 ton was the optimized condition. The main f
Polímeros. Publicado em: 21/05/2018
-
7. Biodegradation in Soil of the PHB/Wood Flour (80/20) and PHB/Sisal Fiber (80/20) Tubes
This paper presents the results of a study that aimed to monitor and evaluate biodegradation in soil, by the mass loss and the mechanical properties of plastic tubes. For this work, there were extruded and injected plastic tubes made of biodegradable polymer poly(hydroxybutyrate) - (PHB) and composite PHB/Wood Flour and PHB/Sisal Fiber, both with 20% fiber.
Mat. Res.. Publicado em: 11/05/2017
-
8. Mechanical and Thermo-Physical Properties of Short Glass Fiber Reinforced Polybutylene Terephthalate upon Aging in Lubricant/Refrigerant Mixture
In this study, the relationship between structure and mechanical properties of aged PBT composite was investigated. Short glass fiber reinforced PBT composites were subjected to aging tests in environments typically found in hermetic compressors. Diffusion kinetics were addressed by a periodic control of samples weight, and samples aged in oil presented mass
Mat. Res.. Publicado em: 29/09/2016
-
9. Crashworthiness Analysis and Evaluation of Fuselage Section with Sub-floor Composite Sinusoidal Specimens
Abstract Crashworthiness is one of the main concerns in civil aviation safety particularly with regard to the increasing ratio of carbon fiber reinforced plastic (CFRP) in aircraft primary structures. In order to generate dates for model validations, the mechanical properties of T700/3234 were obtained by material performance tests, and energy-absorbing resu
Lat. Am. j. solids struct.. Publicado em: 2016-06
-
10. Biodegradation Study of a Novel Poly-Caprolactone-Coffee Husk Composite Film
Abstract Plastic disposal is a worldwide issue due to its long degradation time. Environmentally degradable polymers (EDPs) have received considerable attention because of their faster degradation. However, the use of EDPs is limited by high cost and restricted properties. The incorporation of organic fillers is an alternative to reduce cost while increasing
Mat. Res.. Publicado em: 13/05/2016
-
11. Elasto-Plastic Stress Analysis in Rotating Disks and Pressure Vessels Made of Functionally Graded Materials
Abstract A new elastio-plastic stress solution in axisymmetric problems (rotating disk, cylindrical and spherical vessel) is presented. The rotating disk (cylindrical and spherical vessel) was made of a ceramic/metal functionally graded material, i.e. a particle-reinforced composite. It was assumed that the material's plastic deformation follows an isotropic
Lat. Am. j. solids struct.. Publicado em: 2016-05
-
12. Production and Properties of a New Wood Laminated Veneer/High-Density Polyethylene Composite Board
AbstractThe paper aimed at evaluating the feasibility and the properties of a new product which combines wood veneer and high-density polyethylene (HDPE) from post-consuming plastic bags. Three HDPE amounts were evaluated: 150g/m2, 250 g/m2 e 350 g/m2. The boards were manufactured using a single-opening hot-press under such conditions: 140ºC, for 20 minutes
Mat. Res.. Publicado em: 2015-10