Monte Carlo Method
Mostrando 1-12 de 370 artigos, teses e dissertações.
-
1. A Novel In Silico Monte Carlo Approach to Optimize a PSD Estimation Problem. Generation of Data Fusion Experiment Rules
ABSTRACT This article analyzes the performance of combining information from Scanning Electron Microscopy (SEM) micrographs with Static Light Scattering (SLS) measurements for retrieving the so-called Particle Size Distribution (PSD) in terms of experimental features. The corresponding data fusion is implemented using a novel Monte Carlo-based method consist
Trends in Computational and Applied Mathematics. Publicado em: 2022
-
2. DESIGN AND EXPERIMENT OF A SAFFLOWER PICKING ROBOT BASED ON A PARALLEL MANIPULATOR
ABSTRACT To mitigate the large demand for safflower picking labour and the low efficiency of manual picking, a safflower picking robot that is based on a parallel manipulator is designed. The whole robot mainly consists of a walking device, parallel manipulator device, vision device, picking device, filament collection device, control system, and motor drive
Engenharia Agrícola. Publicado em: 2022
-
3. THEORETICAL UNDERSTANDING OF MORPHOLOGICAL DISTRIBUTION OF HYDROGEN IN AMORPHOUS CALCIUM SILICATE HYDRATE
Determining the morphological distribution of hydrogen atoms in calcium silicate hydrate phase (C-S-H) is of great concern but challenging. In this work, based on the stoichiometric composition of (CaO)1.7(SiO2)(H2O)1.8, a series of amorphous Ca1.7•Si•(O)3.7-x•(OH)2x•(H2O)1.8-x models are constructed using Monte Carlo method, where x represents the m
Quím. Nova. Publicado em: 20/07/2020
-
4. Selecting “the best” nonstationary Generalized Extreme Value (GEV) distribution: on the influence of different numbers of GEV-models
ABSTRACT The selection of an appropriate nonstationary Generalized Extreme Value (GEV) distribution is frequently based on methods, such as Akaike information criterion (AIC), second-order Akaike information criterion (AICc), Bayesian information criterion (BIC) and likelihood ratio test (LRT). Since these methods compare all GEV-models considered within a s
Bragantia. Publicado em: 13/12/2019
-
5. Uncertainty estimation in hydrodynamic modeling using Bayesian techniques
RESUMO A avaliação de incertezas tem emergido como estudo primordial para se conhecerem os efeitos dos erros inerentes aos processos de modelagem de perfis de escoamento de vazões de cheia, de natureza aleatória e epistêmica, presentes em dados de entrada como vazões e topobatimetria, na estrutura e parametrização dos modelos matemáticos utilizados
RBRH. Publicado em: 17/10/2019
-
6. Alternative Non-Ionic Pathway for Uncatalyzed Prins Cyclization: DFT Approach
Density functional theory calculations (ωB97X-D/6-311++G(d,p)) are employed to investigate an alternative pathway for Prins-like cyclization. Although strong acids usually catalyze this reaction, 4-amino-1,3-dioxanes are rapidly obtained in high yields without catalyst when benzenamines and acetaldehyde react at low temperatures, in aqueous medium. Consider
J. Braz. Chem. Soc.. Publicado em: 12/08/2019
-
7. A smooth path to plot hydrogen atom via Monte Carlo method
Abstract In this paper, we show how to build a basic computer program using the Monte Carlo method to display the hydrogen atomic orbitals. For this, in a heuristic way, we applied a von Neumann acceptance-rejection method in simple problems of potential wells, and we end with the hydrogen orbitals representation. In this technique, we spread points uniforml
Rev. Bras. Ensino Fís.. Publicado em: 22/07/2019
-
8. Feasibility of wood production according to productivity class and rotation criteria
Resumo: O objetivo deste trabalho foi avaliar o efeito da rotação florestal sobre a viabilidade técnica e econômica da produção de madeira de eucalipto para carvão, em diferentes classes de produtividade. Utilizaram-se dados de povoamentos de Eucalyptus cuja área foi estratificada em três classes de produtividade: alta, média e baixa. A cada classe
Pesq. agropec. bras.. Publicado em: 04/07/2019
-
9. An efficient mechanical-probabilistic approach for the collapse modelling of RC structures
Resumo As estruturas em concreto armado são largamente utilizadas ao redor do mundo. Entretanto, a modelagem de seu complexo comportamento mecânico por formulações numéricas eficientes tem sido marginalmente apresentada na literatura. As formulações eficientes possibilitam a precisa e realista representação dos fenômenos mecânicos envolvidos e sã
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019
-
10. Satellite Inertia Parameters Estimation Based on Extended Kalman Filter
ABSTRACT: The moment of inertia parameters play a critical role in assuring the spacecraft mission throughout its lifetime. However, determination of the moment of inertia is a key challenge in operating satellites. During satellite mission, those parameters can change in orbit for many reasons such as sloshing, fuel consumption, etc. Therefore, the inertia
J. Aerosp. Technol. Manag.. Publicado em: 28/03/2019
-
11. Predicting LDPE/HDPE blend composition by CARS-PLS regression and confocal Raman spectroscopy
Abstract Industries and the scientific community currently focus on creating new ways to recycle and to reuse polymer waste that leads to serious socio-environmental risks. However, the quality of recycled polyethylenes depends strongly on their purity degree, but the distinction between Low Density Polyethylene (LDPE) and High Density Polyethylene (HDPE) b
Polímeros. Publicado em: 18/03/2019
-
12. Fatigue lifespan of a fillet welded joint - Hybrid approach to obtain the S-N curve with a reduced number of tests
Abstract This paper introduces a hybrid approach for obtaining S-N curves with reduced number of tests associated to statistically simulated data. In order to validate the proposal, two validation process were developed. One using a methodology to generate S-N curves based on Monte Carlo simulations and other using actual data according Zhao et al. (1998), a
Lat. Am. j. solids struct.. Publicado em: 18/10/2018