Modal Analysis
Mostrando 1-12 de 242 artigos, teses e dissertações.
-
1. Finite strip method computer application for buckling analysis of thin-walled structures with arbitrary cross-sections
Abstract The Direct Strength Method (DSM) is a well-known formulation presented in the Brazilian standard ABNT NBR 14762:2010, that estimates the strength capacity of cold-formed steel (CFS) members. However, this formulation requires the elastic critical buckling loads as point of departure, regarding local (L), distortional (D) and global (G) modes, which
REM, Int. Eng. J.. Publicado em: 2021-09
-
2. MAPEANDO A ESCRITA DE ESTUDANTES DO ENSINO FUNDAMENTAL: EM FOCO O ARTIGO DE OPINIÃO
RESUMO Neste trabalho, buscamos analisar as características linguístico-discursivas recorrentes em artigos de opinião produzidos por estudantes da educação básica. Como aporte teórico para análise do corpus, partimos da noção de gênero da Sociorretórica (MILLLER, 1984, 2014; BAZERMAN, 2011a; 2011b; 2015), de princípios teórico-metodológicos de
Trab. linguist. apl.. Publicado em: 09/12/2019
-
3. O ensino das partículas modais alemãs: estratégias didáticas em ALE
RESUMO A investigação das partículas modais alemãs (doravante PMs) vem ganhando cada vez mais atenção no ensino de alemão como língua estrangeira (ALE). As dificuldades de aquisição das PMs podem ser superadas com a aplicação de estratégias didáticas, como: a análise contextual, a qual são diretamente dependentes; o conhecimento da função n
Rev. bras. linguist. apl.. Publicado em: 29/08/2019
-
4. The Cristalino IOCG deposit: an example of multi-stage events of hydrothermal alteration and copper mineralization
Abstract The Cristalino deposit is located 40 km east of Sossego mine, Carajás. The orebody lies along a NW-SE-striking shear zone and is mainly hosted by the Neoarchean bi-modal volcanics of the Grão Pará Group. Field work and petrographic data seconded by SEM-EDS analysis allowed recognizing an early sodic metasomatism that was followed by calcic-ferric
Braz. J. Geol.. Publicado em: 15/04/2019
-
5. An SHM approach using machine learning and statistical indicators extracted from raw dynamic measurements
Abstract Structural Health Monitoring using raw dynamic measurements is the subject of several studies aimed at identifying structural modifications or, more specifically, focused on damage assessment. Traditional damage detection methods associate structural modal deviations to damage. Nevertheless, the process used to determine modal characteristics can in
Lat. Am. j. solids struct.. Publicado em: 14/03/2019
-
6. Fast Optimization of Tuned Mass-Spring Arrangement for Reduction of Acoustic Power Radiation of Submerged Ribbed Cylinder
Abstract In this paper, acoustic power radiation of a submerged finite length ribbed cylinder subject to a harmonic point load is minimized by a new fast scheme. For this purpose, two arrangements of non-uniformly distributed sequential point masses and mass springs attached on stiffening ribs of the cylinder are used to optimally reduce the acoustic power r
Lat. Am. j. solids struct.. Publicado em: 04/02/2019
-
7. GFEM STABILIZATION TECHNIQUES APPLIED TO DYNAMIC ANALYSIS OF NON-UNIFORM SECTION BARS
Abstract The Finite Element Method (FEM), although widely used as an approximate solution method, has some limitations when applied in dynamic analysis. As the loads excite the high frequency and modes, the method may lose precision and accuracy. To improve the representation of these high-frequency modes, we can use the Generalized Finite Element Method (GF
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
8. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
9. FACT-TRACKING BELIEF AND THE BACKWARD CLOCK: A REPLY TO ADAMS, BARKER AND CLARKE
Abstract In “The Backward Clock, Truth-Tracking, and Safety” (2015), Neil Sinhababu and I gave Backward Clock, a counterexample to Robert Nozick’s (1981) truth-tracking analysis of knowledge. In “Knowledge as Fact-Tracking True Belief” (2017), Fred Adams, John Barker and Murray Clarke propose that a true belief constitutes knowledge if and only if
Manuscrito. Publicado em: 08/10/2018
-
10. The dispersion curve applied in guided wave propagation in prismatic rods.
Abstract The early detection of failures in structures is a subject of great interest in engineering; several of these techniques are linked with the elastic wave propagation, using guided waves is one of these alternatives. Several structures of interest in engineering are laminar arrangements; the wave propagation in this type of structures depends not on
Lat. Am. j. solids struct.. Publicado em: 02/07/2018
-
11. Modal Parameter Extraction of a Huge Four Stage Centrifugal Compressor Using Operational Modal Analysis Method
Abstract In recent years, modal analysis has become one of the essential methods for modification and optimization of dynamic characteristics of engineering structures. This is the first published study to identify modal parameters of a complex four-stage centrifugal compressor using Operational Modal Analysis (OMA). Vibrational response was measured contin
Lat. Am. j. solids struct.. Publicado em: 03/05/2018
-
12. Updating Finite Element Model Using Stochastic Subspace Identification Method and Bees Optimization Algorithm
Abstract This study investigates the application of operational modal analysis along with bees optimization algorithm for updating the finite element model of structures. Bees algorithm applies instinctive behavior of honeybees as they look for nectar of flowers. The parameters that needed to be updated are uncertain parameters such as geometry and material
Lat. Am. j. solids struct.. Publicado em: 26/04/2018