Microwaves
Mostrando 1-12 de 114 artigos, teses e dissertações.
-
1. Phase Adjustment of S-Parameters from Coupled Resonator Filters
Abstract This paper presents a method to cancel the constant phase loading and transmission line that are added to the S-parameters of coupled resonant networks. Thus, the phase-corrected S-parameters may be used to obtain a rational model together with its representative coupling matrix. This method is applicable to lossy and lossless coupled resonator netw
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Investigate the Effect of Dielectric Properties on Microwave Absorption of Pyramidal Microwave Absorber
Abstract This paper presents an analysis of the impact of various dielectric properties material’s effects on broadband pyramidal microwave absorbers (PMA). The Computer Simulation Technology (CST) studio software simulates and analyzes the PMA over 0.7 GHz to 30 GHz frequency range. To achieve the best reflectivity performance of the PMA, different types
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Non-Ionizing Radiation Analysis in Close Proximity to Antenna Tower: A Case Study in Northeast Brazil
Abstract While the amount of telecommunications services grows rapidly in the whole world, humans get potentially more exposed to Non-Ionizing Radiation (NIR) from a number of different sources. Measurements of NIR levels are relevant in order to compare the results with national and international standards, aiming at the preservation of human health. Thus,
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
4. IMPLICATION OF MICROWAVES ON THE EXTRACTION PROCESS OF RICE BRAN PROTEIN
Abstract During the processing of rice grain, a wide range of by-products are generated, including Rice Bran (RB), which presents rich composition, offering great potential for application in the food and pharmaceutical industries. Thus, the objective of this work was to evaluate the best operating variables in the extraction of rice bran protein through alk
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
5. Influence of Moringa oleifera derivates in blends of PBAT/PLA with LDPE
Abstract There are few studies about Moringa oleifera derivates in polymer developments where vegetable oil was used as a plasticizer and a biodegrading agent. The polymerization of moringa oil (MO) was carried out assisted by microwaves without catalysts presence. There aren’t studies about the polymerization of MO using microwaves technology. Moringa’
Polímeros. Publicado em: 28/06/2018
-
6. ABORDAGEM DIDÁTICA PARA O DESENVOLVIMENTO DE MOLÉCULAS BIOATIVAS: REGRA DOS CINCO DE LIPINSKI E PREPARAÇÃO DE HETEROCICLO 1,3,4-OXADIAZOL EM FORNO DE MICRO-ONDAS DOMÉSTICO
In Brazil, the development of new chemical entities (NEQ) is still limited to small advances in the academic and public research sectors, the authors understand that this is a sector of the pharmaceutical industry that needs encouragement. Accepting that education transforms society, educate students in the development of bioactive molecules, it’s a way to
Quím. Nova. Publicado em: 2018-01
-
7. Dry Biomass of the Amazonian Macrophyte Paspalun Repens for Evaluation as Adsorbent Material of Heavy Metals Zn and Cu
The present work aims at the preliminary evaluation of the Paspalun repens macrophyte dry biomass adsorbent material of zinc (Zn) and copper (Cu) metals from water. The diversity of Species is due to the extensive aquatic environment where it is inserted. The Paspalun repens species comes from the Buiuçu lake located in the region of Parintins-Amazonas- Bra
Mat. Res.. Publicado em: 06/11/2017
-
8. SÍNTESE DE 2-(2-PIRIDIL)QUINOLINAS PROMOVIDA POR MICRO-ONDAS E SUAS ATIVIDADES ANTIFÚNGICAS
In this work a series of 2-(2- pyridyl)quinolines were prepared via a Povarov reaction between anilines, 2-pyridinocarbadehyde and ethyl vinyl ether under microwaves heating conditions. The optimized conditions herein reported allowed the preparation of several pyridylquinolines in yields in the range of 30-83%, some of them not previously accessible by this
Quím. Nova. Publicado em: 2017-09
-
9. Microwave Assisted Combustion Synthesis and Characterization of Nanocrystalline Nickel-doped Cobalt Ferrites
Abstract Nanoparticles nickel-doped cobalt ferrites [NixCo1-xFe2O4 (x = 0.0, 0.25, 0.50, 0.75 and 1.0 of Ni2+)] were prepared by the microwave combustion synthesis, using a stoichiometric mixture of metal nitrates and urea as the oxidizer and fuel to drive the reaction. The effect of microwave irradiation on the phase composition was favorable to promote the
Mat. Res.. Publicado em: 01/08/2016
-
10. Alternative Igniters Based on Oxidant Salts for Microwave-Induced Combustion Method
In this work, solutions of oxidant salts were evaluated as alternative to nitrate solution for the ignition step in microwave-induced combustion (MIC) method. Aqueous solutions of KClO4, K2Cr2O7, KMnO4 and K2S2O8 in several concentrations were evaluated and it was observed that the ignition was dependent on the concentration and type of igniter solution. Mor
J. Braz. Chem. Soc.. Publicado em: 2016-03
-
11. The Role of Carbon Black on Devulcanization of Natural Rubber by Microwaves
One of the greatest problems of the modern society is the recycling of vulcanized elastomers, like tires and industrial rejects. This work studies one of the techniques of devulcanization of natural rubber (NR), the devulcanization by microwaves, as well as the influence of the amount of carbon black on this process through devulcanization of the NR with con
Mat. Res.. Publicado em: 25/08/2015
-
12. Blends of ground tire rubber devulcanized by microwaves/HDPE - Part B: influence of clay addition
AbstractThe main objective of this work is to study the influence of clay addition on dynamically revulcanized blends of Ground Tire Rubber (GTR)/High Density Polyethylene (HDPE). GTR was previously devulcanized in a system comprised of a conventional microwave oven adapted with a motorized stirring, with a fixed microwave power and at various exposure times
Polímeros. Publicado em: 2015-08