Microstrip Antennas
Mostrando 1-12 de 51 artigos, teses e dissertações.
-
1. Variations of Compact Rectangular Microstrip Antennas Using Defected Ground Plane Structure
Abstract The defects in the form of slots have been employed in microstrip antenna either on the patch or the ground plane to yield frequency reduction. However, the reported work does not provide any comparative study that highlight upon the frequency and cross-polar level reduction achieved using these various shape slot/defects. This paper provides a thor
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Frequency Reconfigurable Near-Zero Refractive Index Material for Antenna Gain Enhancement Applications
Abstract In this paper, a planar near-zero refractive index material (NZRIM) consisting of an outer loop with four symmetrical quarter-rings is proposed. The quarter-rings are connected to the outer loop by two symmetrical microstrip lines on the opposite side. The backside of the substrate has mutually central split microstrip lines. By loading adjustable c
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
3. Radiation Efficiency of an Electrically Small Dual-band UHF Microstrip Patch Antenna Using Wheeler Cap Method
Abstract Determining the radiation efficiency of an antenna is a difficult task that becomes challenging when it is about electrically small antennas. This work investigates the applicability of the Wheeler cap method to measure the radiation efficiency of a UHF dual-band compact microstrip patch antenna. An overview of Wheeler method is presented. An adapta
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
4. Design and Performance Study of Single and Multi-Layered Fractal Based Miniaturized Patch Antennas for 2.4 GHz Applications
Abstract The design and characterization of single and multi-layered miniaturized microstrip antennas resonating at 2.4 GHz are proposed. The miniaturization is accomplished by fractal Defected Ground Structure (DGS). The DGS used for miniaturization is a Modified Minkowski Fractal DGS (M-MFDGS). The proposed size reduction process with M-MFDGS follows the s
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
5. Compact Triple Band Notched Pentagonal Shaped UWB Antenna Loaded with Slots and Parasitic Resonator
Abstract In this paper, a compact, planar printed microstrip line fed pentagonal shape ultra-wideband antenna with triple band-notched characteristics is proposed and investigated. By incorporating a pair of mirrored Γ-shape, a pair of mirrored L-shape slots in the pentagonal patch and bent C-shape parasitic strip at the backside of a patch, the tunable ban
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
6. Analysis of the Resonator Element in Different Positions in the Circular Patch Microstrip Antenna
Abstract In this article, a circular patch microstrip antenna with a metamaterial resonator for 4G applications is proposed. For the design of the circular antenna patch, an approximate calculation was performed. The circular resonator is inserted into the patch for some antennas, in different positions for a parametric study. When incorporating the resonato
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
7. Synthesis and Mechanical Reconfiguration of Ground Plane Tilted Microstrip Antennas Based on Tetra-Circle Fractals
Abstract A synthesis procedure of a mechanically reconfigurable antenna based on tetra-circle fractal patch elements is presented, enabling to change both resonant frequencies and radiation pattern performance. The antenna geometry reconfiguration is implemented by tilting the ground plane of the microstrip antenna with respect to the fractal patch and subst
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-06
-
8. Mutual Coupling Reduction in Phased Array Antennas Applying High-Impedance Surface at X Band
Abstract This paper presents a microstrip phased array using High Impedance Surface - Electromagnetic Bandgap (HIS-EBG) in order to minimize the effects of mutual coupling among the antenna elements. Each element of the array is fed by a coaxial cable allowing the beam steering by controlling the signal of the input port of each element. This phased array op
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-03
-
9. Co-Design of a GPS Antenna Low-Noise Amplifier Front-End Circuit
Abstract This paper presents a clear and fast design procedure for directly matched low noise active integrated microstrip antenna front end circuits. Initially, a theoretical analysis is given for the overall gain equivalence between traditional and directly matched antennas. Then, a detailed procedure is presented for the design and construction of a fully
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 11/11/2019
-
10. Study of Patch Antennas with Koch Curve Form Slots
Abstract This work proposes the study of patch antennas with fractal slots. Initially, a 2.4 GHz microstrip antenna is designed. Then, the slots in the Koch fractals format are inserted with the iteration 0, 1 and 2. Similarly, it is expected that the antenna can be subjected to various functions in other applications. Simulations using CST STUDIO SUITE Stud
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 12/09/2019
-
11. A New Technique Using Axially Slotted Microstrip Line for Antenna Impedance Matching Designs
Abstract A new technique is presented for designing microstrip patch antennas with very good input impedance matching. The analysis is carried out for 1.78 GHz, 2.42 GHz and 3.46 GHz rectangular patch antennas printed on low-cost fiberglass substrates (FR-4), mounted on a ground plane and fed by a microstrip line. The antenna impedance matching is obtained u
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
12. A New Conductive Ink for Microstrip Antenna and Bioinspired FSS Designs on Glass and Fiberglass Substrates
Abstract This paper describes an investigation of the possibility of using a new conductive ink, insted of copper clad laminates, in the manufacturing of microstrip patch antennas on glass and fiberglass substrates and of bioinspired frequency selective surfaces (FSSs) on fiberglass substrates for wireless communication systems. The new conductive ink is dev
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019