Metakaolin
Mostrando 1-12 de 42 artigos, teses e dissertações.
-
1. Mix design formulation range for metakaolin-based geopolymer synthesis
Abstract This article presents a range of mix design formulations to obtain metakaolin-based geopolymer synthesis. Geopolymer samples were synthesized from metakaolin, a 10 M sodium hydroxide solution, and alkaline sodium silicate. These three components were mixed in different proportions to form a paste which was molded in a cylindrical shape, set at room
REM - International Engineering Journal. Publicado em: 2022
-
2. Use of glass waste in the production of metakaolin-based geopolymer submitted to room temperature and thermal curing
Resumo O metacaulim é a principal matéria-prima utilizada na síntese de geopolímeros, embora a relação entre os teores de sílica e alumina não seja a ideal. Normalmente, o teor de SiO 2 é ajustado com o uso de silicatos presentes na solução ativadora. Uma opção ecoeficiente seria o uso de resíduos de vidro como fonte adicional de sílica. Este
Ambiente Construído. Publicado em: 2022
-
3. Characterization and mechanical properties of one-part geopolymer based on a pure metakaolin
Abstract Geopolymers are amorphous silicate polymers that have been extensively studied due to their applications, scientific and technical relevance, and their potential as cement in substitution to Portland. Much of the focus has been in the use of precursors and aggregates that are rarely pure and homogeneous with the use of tailings being very common. Th
REM - International Engineering Journal. Publicado em: 2022
-
4. Evaluation of the properties of a foamed geopolymer developed with different types of metakaolin
Abstract The physical and mechanical properties of foamed geopolymers were determined. The geopolymers were made with two different metakaolins (from Metacaulim do Brasil - MB, and Pantano Grande/RS - MPG) as precursors, with NaOH and Na2SiO3 as activators, and with the addition of foam, which was produced with the foaming agent diethanolamide of coconut fat
Cerâmica. Publicado em: 2021-06
-
5. Analysis of the chloride diffusion coefficients by different test methods in concrete mixtures containing metakaolin and high-slag blast-furnace cement
ABSTRACT This study aims to evaluate the chloride diffusion coefficient and the service life (SL) of concretes containing metakaolin and high-slag blast-furnace cement (HSBFC). Accelerated methods of chloride ion diffusion and migration (RCPT, RMT, BDT and multiregime test method) were used. To produce the specimens, HSBFC resistant to sulphates (CPIII 40 RS
Matéria (Rio J.). Publicado em: 25/11/2019
-
6. A study on the compressive strength and microstructure characteristic of alkali-activated metakaolin cement
ABSTRACT The main purpose of this study was to investigate the compressive strength and microstructure characteristic of alkali-activated metakaolin cement (AAMC). In accordance with this purpose, besides the pure metakaolin activation five other mixtures were designed by substitution of different OPC ratios instead of metakaolin (MK) from 0 to 25 (5, 10, 15
Matéria (Rio J.). Publicado em: 25/11/2019
-
7. Development of Geopolymers for Catalyst Support Applications
A geopolymer with high specific surface area was synthesized from metakaolin, amorphous silica and KOH, in the absence of foaming or saponification agents. The mixture modelling technique was selected for this study among the Design of Experiments tools, using surface area and total pores volume as response variables. The Si/K = 2.46 and Si/Al = 1.37 ratios
Mat. Res.. Publicado em: 25/11/2019
-
8. Argamassas de cal e metacaulim: influência das condições de cura
RESUMO Nesse estudo analisou-se a influência das condições de cura de argamassas de cal aérea com dois tipos de metacaulim, utilizados como substituto parcial da massa de cal (10%). Para a análise, foram realizados ensaios de resistência mecânica à flexão e à compressão e, de composição mineralógica por difração de Raio-X (DRX), em corpos de
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Análise da redução da alcalinidade de compósitos cimento-madeira em função da substituição parcial do cimento Portland por pozolanas
RESUMO O objetivo desta pesquisa foi avaliar a redução da alcalinidade de compósitos cimento-madeira, produzido com cimento Portland e partículas residuais de Pinus spp., em função da substituição gradual do cimento Portland pelas pozolanas sílica ativa (SA) metacaulim (MK), cinza volante (CV), escória de alto-forno (EAF), cinza de casca de arroz (
Matéria (Rio J.). Publicado em: 25/11/2019
-
10. Reuse of iron ore tailings in the production of geopolymer mortars
Abstract A great variety of silica and alumina-rich materials have been investigated in the production of alkaline activated binders (or geopolymers) with low environment impact, e.g. low CO2 emissions. Geopolymer mortars and concretes may be more environmentally friendly if not only Portland cement but also natural aggregates (sand, gravel) are replaced wit
REM, Int. Eng. J.. Publicado em: 16/09/2019
-
11. Effect of Curing Temperature, Activator Solution Composition and Particle Size in Brazilian Fly-Ash Based Geopolymer Production
The geopolymer binder is a relatively new class of inorganic binding material of elevated mechanical strength and good chemical properties. This can be produced using clay minerals or byproducts of the industrial processes, such as metakaolin, fly-ash and blast furnace slag. In this work, geopolymers were produced by alkaline activation of a Brazilian fly-as
Mat. Res.. Publicado em: 22/08/2019
-
12. Alkaline activation of high-calcium ash and iron ore tailings and their recycling potential in building materials
Resumo Materiais álcali ativados são aglomerantes obtidos a partir da ativação alcalina de precursores ricos em alumínio e silício. Os precursores mais comuns utilizados para ativação são as cinzas com baixo teor de cálcio, as escórias de alto forno e o metacaulim. Contudo, a cinza de cavaco de eucalipto (CCE) e o rejeito de minério de ferro (RMF
Ambient. constr.. Publicado em: 10/06/2019