Laminar Mixing
Mostrando 1-12 de 13 artigos, teses e dissertações.
-
1. EXPERIMENTAL AND NUMERICAL ANALYSIS OF CHAOTIC ADVECTION AS AN EFFICIENT APPROACH TO MAXIMIZE HOMOGENEOUS LAMINAR MIXING IN A BATCH MIXER
Abstract In the present work, the impacts of effective parameters on the mixing of Stokes flows in a chaotic batch mixer are numerically and experimentally studied. The batch mixer consists of a container and two circular rotors where the rotors can rotate independently. To investigate the possibility of improving the mixing, the effect of non-constant speed
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
2. DETERMINATION OF THE EFFECTIVE RADIAL THERMAL DIFFUSIVITY FOR EVALUATING ENHANCED HEAT TRANSFER IN TUBES UNDER NON-NEWTONIAN LAMINAR FLOW
AbstractEnhanced heat transfer in tubes under laminar flow conditions can be found in coils or corrugated tubes or in the presence of high wall relative roughness, curves, pipe fittings or mechanical vibration. Modeling these cases can be complex because of the induced secondary flow. A modification of the Graetz problem for non-Newtonian power-law flow is p
Braz. J. Chem. Eng.. Publicado em: 2015-06
-
3. Bending investigation on carbon fiber/epoxy composites nano-modified by graphene
An extreme conditions situation, e.g. pre-salt deep sea exploration, requires new materials with even better performance. Nanotechnology is the new paradigm that can lead to the development of these new super materials. The effect of graphene pileups dispersion into carbon fiber/epoxy composites was investigated experimentally. The dispersion process was bas
J. Braz. Soc. Mech. Sci. & Eng.. Publicado em: 2012-09
-
4. Sistemas de análises químicas em fluxo explorando mecanismos de re-alimentação, calibração multivariada e outras abordagens para melhoria em desempenho / Flow systems exploiting feed-back mechanisms, multivariate calibration and other strategies for improving the analytical performance
Studies focusing on performance of intelligent analytical flow systems, association with multivariate calibration or use of nanocrystals as sensitizers were carried out. Moreover, improvements related to modifications in flow pattern were evaluated with emphasis to in-line dialysis. To this end, a strategy for implementing simultaneous determinations of iron
Publicado em: 2010
-
5. Sistemas de análises químicas em fluxo explorando multi-impulsão, interface única ou quimiometria / Flow systems exploiting multi-pumping, single interface or chemometry
Multi-pumping flow systems (MPFS) present as an unique feature the use of solenoid pumps as fluid propelling devices, which deliver pulsed flows. This flow regime was evaluated in order to improve mixing conditions between the involved solutions, heating transfer and gas diffusion.The association of the chemometric methods of analysis and MPFS systems was de
Publicado em: 2009
-
6. Análise de estabilidade linear de camada de mistura compressível binária / Linear stability analysis of a compressible binary mixing layer
Os sistemas aeroespaciais em sua maioria, se utilizam da liberação de energia química para funcionar. Dentre as aplicações mais comuns estão os motores de aeronaves (i.e. turbinas a gás) e motores foguete. Ambos precisam que o combustível seja misturado com um oxidante em uma camara de combustão para que reajam e formem gases, que serão expandidos
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 12/12/2006
-
7. Linear stability analysis of a compressible binary mixing layer / Análise de estabilidade linear de camada de mistura compressível binária
Os sistemas aeroespaciais em sua maioria, se utilizam da liberação de energia química para funcionar. Dentre as aplicações mais comuns estão os motores de aeronaves (i.e. turbinas a gás) e motores foguete. Ambos precisam que o combustível seja misturado com um oxidante em uma camara de combustão para que reajam e formem gases, que serão expandidos
Publicado em: 2006
-
8. Análise de estabilidade linear de camada de mistura compressível binária / Linear stability analysis of a compressible binary mixing layer
Os sistemas aeroespaciais em sua maioria, se utilizam da liberação de energia química para funcionar. Dentre as aplicações mais comuns estão os motores de aeronaves (i.e. turbinas a gás) e motores foguete. Ambos precisam que o combustível seja misturado com um oxidante em uma camara de combustão para que reajam e formem gases, que serão expandidos
Publicado em: 2006
-
9. "Sistemas de análises químicas em fluxo explorando multi-impulsão e detecção espectrofotométrica: aplicação a formulações farmacêuticas e a extratos de solos" / Multi-pumping flow systems with spectrophotometric detection: application to analysis of pharmaceuticals and soil extracts
Multi-pumping flow systems (MP) utilize solenoid pumps as fluid propelling devices, which deliver pulsed flows. This feature was evaluated in relation to the design, operation and performance of the system, to the mixing conditions, and to the dispersion of the introduced solution. The general evaluation of the MP systems involved investigations about precis
Publicado em: 2006
-
10. Experimental tests unisng static mixers / Ensaios experimentais com misturadores estaticos
Mixing is a unit operation with applicability in many industrial fields, such as food, chemical, petrochemical, beverages and pharmaceutical, just to say some fields. The static mixers appear with an alternative to the traditional agitated vessels. They could be used such in batch mixing operation as in continuous processes, but mainly in continuous processe
Publicado em: 2005
-
11. Modelagem do aquecimento de fluidos com escoamento em tubos
This study considers the modeling of laminar and turbulent flows with conjugated transference of heat in tubes of cylindrical section. Instead of using the convetional finite element or finite volume methods, this formulation applies a different technique discretizing the flow in the radial direction using a 4th order finite differences method. Using this te
Publicado em: 2000
-
12. Escolha de arranjos preferenciais de serpentinas internas em tanques de mistura utilizando a fluido-sinamica computacional
Stirred tank reactors are extensively used in chemical industries to process low volume products of high value. Despite its importance, little is known about the performance of such systems. The mechanical configuration of the internals, in particular the impeller and the heat transfer surfaces, as well as mode of operation, have a deep effect in the flow. A
Publicado em: 1998