Hybrid Polymer Composites
Mostrando 1-12 de 18 artigos, teses e dissertações.
-
1. Rheological characteristics PBAT/organoclay compounds
Abstract The rheological behavior of poly (butylene adipate-co-terephthalate) (PBAT) and its composites prepared with three different organoclays was investigated. Composites containing up to 7.5%, w/w organoclay, were prepared by two routes: (a) direct melt blending in an internal laboratory mixer with high intensity rotors and (b) concentrates (prepared in
REM, Int. Eng. J.. Publicado em: 2019-06
-
2. Assessment of Percolation Threshold Simulation for Individual and Hybrid Nanocomposites of Carbon Nanotubes and Carbon Black
Modeling electrical conductivity of polymer composites with conductive fillers has great applicability to predict conductive materials behavior. In this study, the electrical behavior of simple and hybrid systems prepared from Carbon Black (CB) and Carbon Nanotubes (CNT) was studied. There have been few advances reported in the literature regarding the model
Mat. Res.. Publicado em: 18/09/2017
-
3. Hybrid composites reinforced with short sisal fibres and micro ceramic particles
ABSTRACT Biocomposites reinforced with natural fibres have been extensively investigated as a promising replacing material for synthetic ones, such as the glass fibre reinforced composites. The length of natural fibres depends not only on the plant species, but also on the extraction processing. The heterogeneity of natural fibres, in terms of length, can be
Matéria (Rio J.). Publicado em: 20/07/2017
-
4. Tensile properties of novel carbon/glass hybrid thermoplastic composite rods under static and fatigue loading
ABSTRACT Novel carbon/glass hybrid thermoplastic composite rods have been developed consisting of a PAN-based carbon fiber, an E-glass fiber, and a thermoplastic matrix. Three types of hybrid rods with different carbon/glass ratios were then fabricated. The surface and cross-sectional morphologies of the hybrid rods were observed using a digital microscope.
Matéria (Rio J.). Publicado em: 20/07/2017
-
5. Polymer Composites Reinforced with Hybrid Fiber Fabrics
In an effort to show the influence of the hybridization method in hybrid fabric reinforced composites within the characteristic of the fracture and the mechanical properties, two laminate reinforced with bi-directional woven were developed, where one of them was reinforced with a hybrid strand (hybrid strand composite laminate) and the other with a different
Mat. Res.. Publicado em: 06/03/2017
-
6. Mechanical and Water Intake Properties of Banana-Carbon Hybrid Fiber Reinforced Polymer Composites
The concern for the environmental pollution and the prevention of resources has attracted researchers to develop new eco-friendly green materials based on sustainability principles. In this experimental study, there are six different composite samples were fabricated by using banana and carbon fibers with epoxy resin matrix. The mechanical properties such as
Mat. Res.. Publicado em: 26/01/2017
-
7. Development and characterization of hybrid materials based on biodegradable PLA matrix, microcrystalline cellulose and organophilic silica
The goal of this work was to investigate the production and properties of hybrid materials based on poly(lactic acid) (PLA), employing microcrystalline cellulose (MCC) and organophilic silica (R972) as fillers. The composites were obtained by solution casting to form films. Each nanoparticle was incorporated at 3 wt. %, relative to the polymer matrix. In thi
Polímeros. Publicado em: 30/09/2014
-
8. Hardness and degree of conversion of dental restorative composites based on an organic-inorganic hybrid
This paper presents a factorial design (mixture design) used to analyze the hardness and degree of monomer conversion into composites containing conventional monomers and an organic-inorganic hybrid polymer-based methacryloyloxypropyl trimethoxysilane (MEMO). For this purpose, resins (composites with SiO2) were formulated with the hybrid polymer (polycondens
Mat. Res.. Publicado em: 11/06/2013
-
9. PREPARAÇÃO, CARACTERIZAÇÃO E COMPORTAMENTO MECÂNICO DE COMPÓSITOS HÍBRIDOS À BASE DE RESINA EPÓXI/FIBRA VISANDO À PRODUÇÃO DE JUNTAS POR ENROLAMENTO FILAMENTAR. / PREPARATION, CARACTERIZATION AND MECHANICAL BEHAVIOUR OF HYBRID COMPOSITE FOR THE PRODUCTION OF JOINTS BY FILAMENT WINDING.
As junções representam uma descontinuidade na homogeneidade do material que resulta em tensões localizadas, onde frequentemente se inicia a falha, tornando-se inevitável sua introdução em sistemas de tubulação. O uso extensivo de materiais compósitos em sistemas de tubulação ainda é limitado. E isso se deve à necessidade do estudo de materiais c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/03/2012
-
10. Influence of processing variables on the mechanical behavior of HDPE/clay nanocomposites
Nanocomposites were processed using the technique of melt intercalation, starting from a concentrated polar compatibilizer/organoclay (PE-g-MA/organoclay) prepared in an internal mixer. The concentrate was incorporated into the matrix of HDPE by two methods: I) counter-rotating twin-screw extruder and II) co-rotating twin-screw extruder, using two screw prof
Materials Research. Publicado em: 31/05/2012
-
11. Preparation and characterization of ramie-glass fiber reinforced polymer matrix hybrid composites
The use of ramie fibers as reinforcement in hybrid composites is justified considering their satisfactory mechanical properties if compared with other natural fibers. This study aims to verify changes in chemical composition and thermal stability of the ramie fibers after washing with distilled water. One additional goal is to study glass fiber and washed ra
Materials Research. Publicado em: 29/05/2012
-
12. Desenvolvimento de um laminado compósito híbrido a base de fibras de vidro/licurí
This research work is based, in search of reinforcements vegetable alternative to polymer composites. The idealization of making a hybrid composite reinforced with vegetable fibers licuri with synthetic fibers is a pioneer in this area. Thus was conceived a hybrid composite laminate consisting of 05 (five) layers being 03 (three) webs of synthetic fibers of
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 20/06/2011