Hybrid Composites
Mostrando 1-12 de 77 artigos, teses e dissertações.
-
1. Post-elastic Deformation Characteristics of Hybrid Fibre Reinforced Concrete Composites
Abstract The present study was focused on evaluating the strength and failure properties of hybrid micro-fibre concretes containing micro brass and steel fibre additions. Experimental tests were conducted on different hybrid fibre concretes containing aligned fibres in the direction of beam axis and the relative mechanical performance was compared to randoml
Lat. Am. j. solids struct.. Publicado em: 10/01/2020
-
2. Evaluation of the stiffening mechanism based on micro-sized particle inclusions in laminated composites
Rigid particles have been incorporated into laminated composites, especially to enhance their bending performance attributed to the stiffening of the matrix phase (i) and the increased interlaminar shear resistance (ii). In order to better evaluate the improvement mechanism provided by the particulate inclusions, this work investigates the incorporation of m
Mat. Res.. Publicado em: 17/10/2019
-
3. Obtaining and characterizing dental hybrid composites with clay or silica nanoparticles and boron-aluminum-silicate glass microparticles
Abstract The aim of the present work was the obtaining and characterization of dental hybrid composites using nanoparticles (clay or silica) and boron-aluminum-silicate microparticles. We evaluated the dispersion of the nanofillers when changing their loading among 2.5%, 5%, 10% and 25% wt. Were tested, in the above quantities, four different types of nanofi
Polímeros. Publicado em: 27/06/2019
-
4. Study on impact of fiber hybridization in material properties of engineered cementitious composites
ABSTRATO Compósito Cimentício Projetado (ECC) é um tipo de compósitos cimentícios reforçados com fibras de alto desempenho melhorados com bom comportamento de tração, compressão e flexão. O ECC é conhecido por seu comportamento de endurecimento de tensão sob tensão e tem sido cada vez mais aplicado na prática de engenharia. O processo de adicio
Matéria (Rio J.). Publicado em: 10/06/2019
-
5. Rheological characteristics PBAT/organoclay compounds
Abstract The rheological behavior of poly (butylene adipate-co-terephthalate) (PBAT) and its composites prepared with three different organoclays was investigated. Composites containing up to 7.5%, w/w organoclay, were prepared by two routes: (a) direct melt blending in an internal laboratory mixer with high intensity rotors and (b) concentrates (prepared in
REM, Int. Eng. J.. Publicado em: 2019-06
-
6. Corrosion Investigation of Stir Cast Zn-27Al Based Hybrid Composites Reinforced with Quarry Dust and Silicon Carbide Particles
This paper investigates the corrosion behaviour of Zn-27Al based hybrid composites reinforced with quarry dust (QD) and silicon carbide particles (SiCp). The Zn-27Al hybrid composites containing 8 wt% and 10 wt% SiCp-QD particles reinforcement with varied weight percentage of 0, 25, 50, 75 and 100% quarry dust respectively were synthesized using stir casting
Mat. Res.. Publicado em: 13/05/2019
-
7. Effect of radiant exposure and UV accelerated aging on physico-chemical and mechanical properties of composite resins
Abstract Currently, there is no consensus in terms of defining the minimum radiant exposure values necessary for achieving adequate properties of composite resin. In addition, the long-term influence that radiant exposure has on the properties of composite resins is still questionable. Objective: The objective of this study was to evaluate the effect of radi
J. Appl. Oral Sci.. Publicado em: 07/01/2019
-
8. Mechanical behavior and water absorption in sisal/glass hybrid composites
ABSTRACT This study aimed to assess the effect of hybridization on thermomechanical properties and water absorption of composite materials, by introducing sisal fiber tissue into the material. To that end, two composite material plates were manufactured, the first with five layers of E-glass reinforcement mat and the second with three layers of E-glass fiber
Matéria (Rio J.). Publicado em: 06/12/2018
-
9. Efeito da adição de fibras híbridas na durabilidade de compósitos cimentícios avançados em ambientes úmidos e agressivos
ABSTRACT Reactive powder concrete (RPC) is one type of advanced cementitious composite that has been increasingly used. Its high mechanical strength enables the application of the composite in bolder structures. Considering its recent history of use, there is a lack of knowledge about this materials durability. Therefore, this paper aimed to evaluate the beh
Matéria (Rio J.). Publicado em: 18/10/2018
-
10. Determinación de la tenacidad a la fractura J en laminados fibra-metal del tipo CARALL con láminas de aluminio 6061 y 1050
ABSTRACT Determination of fracture toughness in hybrid composites, fiber-metal laminates, FML (Fiber Metal Laminates) is very important to perform an analysis of structural integrity to estimate damage tolerance and residual strength of the material against the propagation of a crack This evaluation should be done in both naval and aircraft structures using
Matéria (Rio J.). Publicado em: 19/07/2018
-
11. AVALIAÇÃO DO PAPEL DO ÓXIDO DE GRAFENO (GO) NA GERAÇÃO FOTOCATALÍTICA DE HIDROGÊNIO EM SISTEMAS BINÁRIOS (GO-CdS) E TERNÁRIOS (Pt-GO-CdS)
Water splitting is a promising process to produce hydrogen from friendly feedstock and solar energy. In this work we have evaluated binary (GO-CdS) and ternary (Pt-GO-CdS) hybrid photocatalysts for hydrogen production assisted by visible light irradiation. Cadmium sulfide and composites with GO were prepared by sonochemical and thermal methods. GO addition t
Quím. Nova. Publicado em: 2018-07
-
12. Effect of compatibiliser on the properties of polypropylene/glass fibre/nanoclay composites
Abstract Glass fibre (GF), nanoclay (NC) and hybrid composites compatibilised with maleic anhydride polypropylene (MAPP) were prepared by extrusion and injection moulding. The fourier transform infra-red spectra revealed the characteristic absorption peaks of MAPP in the compatibilised GF and NC composites. A decrement in the peak intensity of X-ray diffrac
Polímeros. Publicado em: 21/05/2018