Heat Transfer
Mostrando 1-12 de 704 artigos, teses e dissertações.
-
1. Behavior of the effective heat transfer coefficient and global thermal resistance in freezing of fruit juice model solutions in cylindrical packages
Abstract In this study the effect of packing on freezing time, effective heat transfer coefficient and global thermal resistance were evaluated during the freezing of fruit juice model solution in an air blast freezer. Two configurations were arranged with 40 buckets and 15 kg of solution in each, totaling 600 kg. Thermocouples were installed to monitor the
Food Sci. Technol. Publicado em: 2020-12
-
2. Effect of Plasma Arc Welding on Residual Stress and Distortion of Thin Titanium Sheet
In this research work, a finite element model is developed to predict the temperature field and residual stress during plasma arc welding of thin Ti-6Al-4V sheets. Dhinakaran’s heat source model which is based on Parabolic Gaussian distribution is used to predict the temperature field and Anand’s model is used to predict the residual stress. Numerical si
Mat. Res.. Publicado em: 20/01/2020
-
3. AN INVESTIGATION OF THE HEAT TRANSFER PERFORMANCE OF DUAL IMPROVED INTERMIG IMPELLERS IN A STIRRED TANK WITH AN INNER HEATING COIL
Abstract The heat transfer process in a stirred tank of diameter T=0.5m equipped with dual-layer improved Intermig impellers and helical coils was investigated by experiment and numerical simulation methods. The temperature field, the temperature boundary layer lateral to the coil and the heat transfer coefficient were measured at different rotational speeds
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
4. WATER HOLDING CAPACITY AND HEAT TRANSFER ASPECTS OF A MIXTURE OF SUGAR CANE BAGASSE AND WHEAT BRAN IN A PARTIALLY FILLED ROTATING DRUM
Abstract Maximum water holding capacity of a mixture of sugarcane bagasse and wheat bran was determined in static conditions and in a drum rotated at 1 rpm. The variables filling degree, water flow rate, volume of added water and number of sprinklers were tested to control the moisture content of the solid and the number of rotations to achieve homogeneous m
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
5. Reproductive physiology of the heat-stressed dairy cow: implications for fertility and assisted reproduction
Abstract Heat stress causes a large decline in pregnancy success per insemination during warm times of the year. Improvements in fertility are possible by exploiting knowledge about how heat stress affects the reproductive process. The oocyte can be damaged by heat stress at the earliest stages of folliculogenesis and remains sensitive to heat stress in the
Anim. Reprod.. Publicado em: 28/11/2019
-
6. Strategies to increment in vivo and in vitro embryo production and transfer in cattle
Abstract Knowledge of follicular wave dynamics obtained through the use of real-time ultrasonography and the development of the means by which follicular wave dynamics can be controlled have provided practical approaches for the in vivo and in vitro production and transfer of embryos in cattle. The elective control of follicular wave emergence and ovulation
Anim. Reprod.. Publicado em: 28/11/2019
-
7. ENERGETIC ANALYSIS OF AN ABSORPTION CHILLER USING NH3/LiNO3 AS AN ALTERNATIVE WORKING FLUID
Abstract This paper presents a thermodynamic model developed for a prototype absorption chiller using NH3/LiNO3 with 10 kW of nominal capacity. The study was undertaken using thermodynamic modeling based on the mass and energy balance, takes the overall heat transfer coefficients into consideration and uses the characteristic equation method. First, the resu
Braz. J. Chem. Eng.. Publicado em: 30/09/2019
-
8. Theoretical and Experimental Heat Transfer in Solid Propellant Rocket Engine
ABSTRACT: Accurate determination of heat flux is an important task not only in the designing aspect, but also in the performance analysis of rocket engines. In this purpose, this work deals with the heat flux determination in a combustion chamber through the inverse method. In this approach, the transient heat flux is determined from the experimental tempera
J. Aerosp. Technol. Manag.. Publicado em: 26/08/2019
-
9. Modelagem e simulação do crescimento de Talaromyces flavus em abacaxi: uma integração entre modelos cinéticos e de fenômenos de transporte
Resumo O estudo da dinâmica de crescimento de microrganismos em alimentos é de vital importância para a extensão da vida de prateleira desses produtos. No presente trabalho, um modelo de cinética microbiológica descrevendo o crescimento de Talaromyces flavus em abacaxi foi integrado com um modelo térmico. O modelo integrado foi utilizado para simular
Braz. J. Food Technol.. Publicado em: 22/08/2019
-
10. Effects of Heat Treatment on the Relative Amounts of Cellulose in Nanosilver-Impregnated and Untreated Poplar Wood (Populus alba)
ABSTRACT The present study investigated the effect of heat treatment on the relative amount of cellulose in untreated and nanosilver-impregnated poplar wood (Populus alba). The impacts on physical and mechanical properties were further studied. Specimens were heated at 145°C and 165°C in hot air medium. In order to enhance heat transfer to the inner parts
Floresta Ambient.. Publicado em: 29/07/2019
-
11. EFFECT OF STEEL PLATE THICKNESSES AND FLUID FLOW CHARACTERISTICS OF AN IMPINGING AIR JET ON HEAT TRANSFER AT THE STAGNATION POINT
ABSTRACT The design and process of heat transfer elements, from its source to heat sink through various media vary according to the product and system concerned. The effect of thickness of a steel plate on heat transfer characteristics with an impinging air jet at the stagnation point was studied. Experiments were carried out with different nozzles, heights,
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
12. SIMULATION OF THERMAL DECOMPOSITION IN AN OPEN CAVITY: ENTROPY ANALYSIS
ABSTRACT This paper presents a numerical analysis of entropy generation in a two-dimensional rectangular channel where the inlet flow undergoes thermal decomposition resulting from a chemical reaction. The model considered viscosity and thermal conductivity to be dependent of temperature. Irreversibility due to mass transport was included in the entropy gene
Braz. J. Chem. Eng.. Publicado em: 15/07/2019