Grooving Abrasion
Mostrando 1-4 de 4 artigos, teses e dissertações.
-
1. Microstructure and Mechanical Properties of Borided Inconel 625 Superalloy
ABSTRACT The Ni- based superalloy Inconel 625 is extensively used owing to its high strength, excellent fabricability, good weldability and outstanding resistance to high temperature corrosion against aggressive environments. However, despite its unique properties and extensive use, its wear resistance is in some cases unsatisfactory. In this study, Inconel
Matéria (Rio J.). Publicado em: 22/06/2017
-
2. Estudo do desgaste e atrito em ensaios micro-abrasivos por esfera rotativa fixa em condições de força normal constante e pressão constante. / Wear and friction study in micro-abrasive wear testing by rotative fixed ball under conditions of constant normal force and constant pressure.
The micro-scale abrasive wear test by rotative ball has gained large acceptance in universities and research centers, being widely used in studies on the abrasive wear of materials. Two wear modes are usually observed in this type of test: rolling abrasion results when the abrasive particles roll on the surface of the tested specimen, while grooving abrasion
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/06/2011
-
3. Resistencia ao impacto da união dente-resina acrilica sob efeito da desinfecção simulada por energia de microondas / Effect of simulated microwave disinfection on bond strength of acry teeth and denture base resins
The aim of this study was to evaluate the effect of microwave disinfection in bond strength of acrylic teeth and a denture base resin. A hundred sixty rectangular wax patterns (30x15x5mm) were embedded in flasks with type III dental stone. After cristalization, the resulting moulds were filled with laboratorial silicone (Zetalabor), in which a molar acrylic
Publicado em: 2009
-
4. Estudo do comportamento do coeficiente de desgaste e dos modos de desgaste abrasivo em ensaios de desgaste micro-abrasivo. / Wear coefficient and wear mode transition study in micro-abrasive wear testing.
This work presents a study on the behavior of different materials under the action of micro-abrasive wear. A micro-abrasive wear testing machine with fixed sphere was designed and constructed, presenting a mechanical configuration with differences with respect to those found in the literature (Gee et al., 2005). M2 tool steel and WC-Co P20 were used as testi
Publicado em: 2006