Glass Fibers
Mostrando 1-12 de 103 artigos, teses e dissertações.
-
1. Physicochemical characterization, carotenoid content and protein digestibility of pumpkin access flours for food application
Abstract Pumpkin (Cucurbita maxima) research has been growing because of its characteristics, such as the attractive color, low-cost production, nutritional potential, and functional properties for food application. In this context, pumpkin processing for flour production provides a full possibility for the consumption of this vegetable, being thus an altern
Food Sci. Technol. Publicado em: 2020-12
-
2. OTIMIZAÇÃO DO PROCESSO NÃO INVASIVO E NÃO DESTRUTIVO DE EXTRAÇÃO E ANÁLISE DE METABÓLITOS VOLÁTEIS DE MAMÃO PAPAIA POR SPME-GC-MS
The analysis of volatiles is an alternative in the routine of quality control of fruits, since the volatile metabolites can change in the presence of microorganisms. A well-established method for extracting volatiles is the solid phase microextraction (SPME). This work aims to define some parameters (fiber coating, conditioning time and fiber exposure time)
Quím. Nova. Publicado em: 2020-09
-
3. Estudo da substituição do nylon por compósito de polipropileno com fibra de vidro
RESUMO Peças fabricadas com polímeros de alto desempenho têm sido substituídas por materiais similares, sendo produzidas com uma composição de polipropileno (PP), que tem um custo mais baixo. Uma das composições mais comumente utilizadas é a junção do polipropileno com fibras, resultando na formação de um novo material, com características dife
Matéria (Rio J.). Publicado em: 16/09/2019
-
4. Cellulose Nanocrystals and Jute Fiber-reinforced Natural Rubber Composites: Cure Characteristics and Mechanical Properties
A comparative study was conducted for three natural rubber (NR) composites: one containing raw jute fibers, one containing bleached jute fibers, and one containing cellulose nanocrystals (CNCs). The composites were prepared by adding each filler at 5 or 10 phr to the latex before chemical coagulation, and the composites were processed in a two-roll mixing mi
Mat. Res.. Publicado em: 26/08/2019
-
5. Fire exposure behavior of epoxy reinforced with jute fiber applied to ceramic tiles for a ventilated facade system
Civil construction seeks to increase the useful life of the facades of buildings. Installing a ventilated facade is one way to accomplish this due to aesthetic and technical advantages. Ceramic tiles are the main products used as the covering. To the back face of a tile, a bidirectional screen of glass fiber is adhered using epoxy resin. This set forms a com
Mat. Res.. Publicado em: 18/07/2019
-
6. Presence of iron in polymers extruded with corrosive contaminants or abrasive fillers
Abstract Off-site measurements of the dimensions of extruder screws are used to monitor their wear. This wear causes the presence of metals in the processed polymer. We detected the presence of iron in polymers processed with corrosive contaminants or abrasive fillers. To this end we processed poly(ethylene terephthalate), PET, pure or contaminated with poly
Polímeros. Publicado em: 10/06/2019
-
7. Failure Theories and Notch Type Effects on the Mechanical Properties of Jute-Glass Hybrid Composite Laminates
This study aimed to analyze the mechanical properties and damage characteristics in uniaxial tensile loading of two hybrid composite laminates consisting of an ortho-therephthalic polyester matrix reinforced by bidirectional jute fabrics and E-glass fibers, with different configurations and types of geometric discontinuities in the longitudinal section, char
Mat. Res.. Publicado em: 31/01/2019
-
8. Weibull analysis of tensile tested piassava fibers with different diameters
ABSTRACT Environmental considerations in addition to technical, economical and societal benefits are increasingly promoting the substitution of natural fibers for glass fiber in polymer matrix composites. However, natural fibers are heterogeneous in their dimensions, specially the cross section, which plays an important role in their mechanical strength. It
Matéria (Rio J.). Publicado em: 06/12/2018
-
9. Mechanical behavior and water absorption in sisal/glass hybrid composites
ABSTRACT This study aimed to assess the effect of hybridization on thermomechanical properties and water absorption of composite materials, by introducing sisal fiber tissue into the material. To that end, two composite material plates were manufactured, the first with five layers of E-glass reinforcement mat and the second with three layers of E-glass fiber
Matéria (Rio J.). Publicado em: 06/12/2018
-
10. Influence of preheating and post-curing on a novel fiber-reinforced composite post material
Abstract The aim of this study was to investigate the influence of preheating and post-curing methods on diametral tensile strength (DTS), flexural strength (FS), knoop microhardness (KHN), and degree of conversion (DC) of an experimental fiber-reinforced composite (FRC). Specimens (30 wt% of 3-mm-short E-glass fiber, 22.5 wt% of methacrylated-based resin an
Braz. oral res.. Publicado em: 29/10/2018
-
11. Behavior of fiber reinforced mortar composites under impact load
Abstract This paper presents results of the experimental study on the behavior of plain and fiber reinforced cement mortars with different fibers under static and impact compressive load. Glass, polypropylene and carbon fibers were used in equal dosage by mass. The impact test was conducted using an impact tower with drop hammer, which represented the modif
Lat. Am. j. solids struct.. Publicado em: 26/04/2018
-
12. An Evaluation of the Dielectric Barrier Discharge Treatment on the Mechanical, Structural and Morphological Properties of Carbon Fibers
ABSTRACT: Carbon fibers (CFs) have been widely applied in the manufacture of polymeric composites. The mechanical properties of these composites depend on the adhesion in the matrix/CF interface. Since the CFs have poor adhesion properties, a surface treatment of the CFs becomes necessary. The plasma process used in this work was the dielectric barrier disch
J. Aerosp. Technol. Manag.. Publicado em: 29/03/2018