Geometric Non Linearity
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Physical and geometric non-linear analysis using the finite difference method for one-dimensional consolidation problem
Abstract This article presents a numerical model based on the finite difference method for the physical and geometric non-linear analysis of a one-dimensional consolidation problem regarding a saturated, homogeneous and isotropic soil layer with low permeability and high compressibility. The problem is formulated by adopting the void ratio as the primary var
REM, Int. Eng. J.. Publicado em: 2019-06
-
2. Contribuição ao estudo dos pilares com seção transversal em formato geométrico de Lconsiderando a não-linearidade física e geométrica. / Contribution to the study of columns with l-shaped cross sections considering physical and geometric non-linearity.
Pilares de edifícios estão sempre submetidos à flexão composta oblíqua. Este trabalho tem como objetivo comparar, em seções transversais com formato geométrico de L, os resultados obtidos por dois métodos de cálculo: a) Integração numérica na qual, para cada direção principal, são utilizadas curvaturas reais obtidas de diagramas momentocurvat
Publicado em: 2010
-
3. Coupled thermal and structural analysis of steel columns under fire condition / Análise termoestrutural de pilares de aço em situação de incêndio
The most part of materials whose constitute fire protection elements or structural elements, such as steel columns, when exposed to high temperature have their strength and elasticity modulus reduced caused by thermal action. Therefore the structure can collapse earlier than in an ambient temperature situation. Based in this aspect, the objective of the pres
Publicado em: 2009
-
4. Sistema Computacional para Análise Avançada Estática e Dinâmica de Estruturas Metálicas
A new computational tool for the advanced static and dynamic analysis of steel framed structures based on the Finite Element Method has been developed and is presented herein. Understanding the static and dynamic behavior of a structure is essential for designing structures that are lighter and slenderer without affecting their safety and quality standards.
Publicado em: 2009
-
5. Improvement of formulation of identification and solution of the bidimensional impact between structure and rigid wall / Aprimoramento de formulação de identificação e solução do impacto bidimensional entre estrutura e anteparo rígido
This work has as main goal the development of a formulation, based on the finite element method (FEM), for the identification and solution of the bidimensional nonlinear impact between reticulated cyclics structures and fixed rigid wall. The dynamic geometrically nonlinear behavior is treated with a positional formulation classified as total Lagrangean with
Publicado em: 2008
-
6. Desenvolvimento de programa livre para análise de pórticos tridimensionais considerando-se a não linearidade geométrica, fissuração do concreto e ligações semi-rígidas
Structural analysis of framed structures using discrete method, wherein, splitting them into elements with simplified considerations, can bring not satisfactory results or end up using very high safety coefficient to the structure. With the growth of computing and microcomputers it is feasible the resolution of structures considering all parts, therefore thr
Publicado em: 2007
-
7. VIBRATION CONTROL OF SLENDER TOWERS WITH A PENDULUM ABSORBER / ABSORSOR PENDULAR PARA CONTROLE DE VIBRAÇÕES DE TORRES ESBELTAS
In the present work the performance of a pendulum absorber in the vibration control of tall and slender towers, caused by dynamic loads, such as, environmental loads, is studied in detail. Due to the possibility of large amplitude oscillations, the non-linearity of the pendulum is considered in the modeling of the problem. The main objective of this research
Publicado em: 2006
-
8. Experimental and numerical analysis of cold-formed steel angles under tension and connected with bolts / Análise experimental e numérica de cantoneiras de aço formadas a frio, sob tração e conectadas por parafusos
This work is an experimental and numerical study of cold-formed steel angles connected with bolts and under tension loading. Due to the non-uniform straining of the tension- member when connected to the gusset plate, a debilitating phenomenon, known as the shear lag, takes place. This phenomenon is also investigated in this research. For the calculation of t
Publicado em: 2006
-
9. CONECTOR DE CISALHAMENTO EM PERFIL FORMADO A FRIO: ANÁLISE VIA MODELAGEM COMPUTACIONAL
In a composite system, a steel beam (laminated, welded or cold formed) is associated with a concrete slab, forming a composite beam. The interaction between concrete and steel can be mechanical, by friction or, in some cases, only by adherence. One of the major advantages of the composite beams is the increase in strength and stiffness due to association of
Publicado em: 2006
-
10. Verificação de pilares de aço à flexão composta considerando comprimentos de flambagem, forças horizontais fictícias e análise avançada. / Design of steel columns to bending and compression using effective length, notional loads and advanced analysis approaches.
This work discusses the main philosophies used to verify columns subjected to bending and compression in steel frames as well as the standards which recommend them. The effective length and notional loads approaches and the advanced analysis concept are discussed too. It is proposed a methodology of advanced analysis based on shell finite elements that accou
Publicado em: 2005
-
11. Modelagem de pilares paredes em edifÃcios
Slender sky-scraper constructions require pondering prior analysis features like global and localized geometrical imperfection, physical and geometrical non-linearity aspects, adequate modeling of structural elements with respect to shear-wall elements, etc. In this work, the shear-wall behavior of an actual building is studied, upon which columns were model
Publicado em: 2002
-
12. Valores de referência de acetona urinária em uma população do sul de Minas Gerais / Reference values for urinary acetone in a population of south of Minas Gerais state
The determination of reference values of some xenobiotics is important for the biomonitoring, to compare the concentration in the exposed and the general population. The acetone is a very popular solvent, that is used in a large number of industries and laboratories. Isopropanol is used in industries, laboratories and cosmetic products. In the human body, th
Publicado em: 2002