Fracture Mechanics
Mostrando 1-12 de 97 artigos, teses e dissertações.
-
1. Intermittent vibrations accelerate fracture healing in sheep
Abstract Purpose: To investigate the effect of intermittent vibration at different intervals on bone fracture healing and optimize the vibration interval. Methods: Ninety sheep were randomized to receive no treatment (the control group), incision only (the sham control group), internal fixation with or without metatarsal fracture (the internal fixation gro
Acta Cir. Bras.. Publicado em: 12/09/2019
-
2. Estudo das Trincas Retas com o Método dos Elementos de Contorno, a Função de Green Numérica e a Técnica da Dupla Reciprocidade
RESUMO Nos últimos anos, o Método dos Elementos de Contorno (MEC) tem sido aplicado com sucesso a problemas da mecânica da fratura linear elástica (MFLE) envolvendo os casos estático e dinâmico. Para resolver problemas com ações de domínio (por exemplo: forças gravitacionais, problemas transientes com velocidades e acelerações, etc.) via MEC, Nar
TEMA (São Carlos). Publicado em: 10/06/2019
-
3. Structural Behavior of RC Beams Containing a Pre- Diagonal Tension Crack
Abstract This study focuses the light on the shear behavior of pre-cracked beams, and examines the feasibility of applying fracture mechanics concepts to widen the understanding of shear behavior and mechanisms. The experimental program contains ten beam specimens of high strength concrete (HSC) and steel fiber reinforced concrete (SFRC). Pre-cracks were emb
Lat. Am. j. solids struct.. Publicado em: 16/07/2018
-
4. A New Approach for Investigation of Mode II Fracture Toughness in Orthotropic Materials
Abstract Estimation of mode II fracture toughness (KIIC) in composite materials is known as a troublous and crucial problem. Dissipated values of KIIC that are reported in different fracture mechanics references is the evidence of the mentioned claim. This problem can signify the necessity of modification on common test methods and fixtures. The present stu
Lat. Am. j. solids struct.. Publicado em: 14/05/2018
-
5. Guide for Recommended Practices to Perform Crack Tip Opening Displacement Tests in High Strength Low Alloy Steels
Abstract: Fracture mechanics approach is important for all mechanical and civil projects that might involve cracks in metallic materials, and especially for those using welding as a structural joining process. This methodology can enhance not only the design but also the service life of the structures being constructed. This paper includes detailed considera
Soldag. insp.. Publicado em: 2016-09
-
6. Numerical Modelling of Crack Propagation in Cement PMMA: Comparison of Different Criteria
Modelling of a crack propagating through a finite element mesh under mixed mode conditions is of prime importance in fracture mechanics. In this paper, three different crack growth criteria and the respective crack paths prediction in the cement mantle of the reconstructed acetabulum are compared. The maximum tangential stress (MTS) criterion, the minimum st
Mat. Res.. Publicado em: 04/07/2016
-
7. Quality management system implementation for fracture toughness testing
Abstract The evaluation of material fracture mechanic properties has had an increasing need, especially in the oil and gas industries. This scenario requires quality assurance of fracture toughness tests. This article describes the activities carried out when implementing the Quality Management System (QMS) for the fracture toughness tests at the Physical Me
Rem: Rev. Esc. Minas. Publicado em: 2016-03
-
8. Dynamic Analysis of Elastically Supported Cracked Beam Subjected to a Concentrated Moving Load
Abstract This study deals with the dynamic behavior of a cracked beam subjected to a concentrated force traveling at a constant velocity. Dynamic analyses for a hinged-hinged cracked beam resting on elastic supports under the action of a moving load are carried out by the finite element method. For the beam having rectangular cross-section, element formulati
Lat. Am. j. solids struct.. Publicado em: 2016-01
-
9. Effect of Open Crack on Vibration Behavior of a Fluid-Conveying Pipe Embedded in a Visco-Elastic Medium
Abstract In this paper vibration behavior of a fluid-conveying cracked pipe surrounded by a visco-elastic medium has been considered. During this work, the effect of an open crack parameters and flow velocity profile shape inside the pipe on natural frequency and critical flow velocity of the system has been analytically investigated. An explicit function fo
Lat. Am. j. solids struct.. Publicado em: 2016-01
-
10. Probabilistic analysis of stress intensity factor (SIF) and degree of bending (DoB) in axially loaded tubular K-joints of offshore structures
Abstract The stress intensity factor (SIF) and the degree of bending (DoB) are among the crucial parameters in evaluating the fatigue reliability of offshore tubular joints based on the fracture mechanics (FM) approach. The value of SIF is a function of the crack size, nominal stress, and two modifying coefficients known as the crack shape factor (Yc) and ge
Lat. Am. j. solids struct.. Publicado em: 2015-11
-
11. A New Displacement-based Approach to Calculate Stress Intensity Factors With the Boundary Element Method
Abstract The analysis of cracked brittle mechanical components considering linear elastic fracture mechanics is usually reduced to the evaluation of stress intensity factors (SIFs). The SIF calculation can be carried out experimentally, theoretically or numerically. Each methodology has its own advantages but the use of numerical methods has become very popu
Lat. Am. j. solids struct.. Publicado em: 2015-09
-
12. On the Processing and Properties of Clay/Polymer Nanocomposites CPNC
AbstractAn experimental investigation followed by fundamental characterization and discussion on the effect of nanoclay filler on the mechanical and fracture properties of polymer matrix was carried out. The study was carried out on clay/polymer nanocomposite made of High Density polyethylene (HDPE M40060) produced by Saudi Arabian company SABIC and montimor
Lat. Am. j. solids struct.. Publicado em: 2015-04