Epdm
Mostrando 1-12 de 72 artigos, teses e dissertações.
-
1. Quantification of Aerospace Polymer Blends by Thermogravimetric Analysis and Infrared Spectrometry
ABSTRACT Ethylene-propylene-diene elastomer (EPDM) is employed as thermal insulation for rocket motors, as well as EPDM blends with ethylene vinyl acetate (EVA) have been used in the aerospace industry. The quantification of these blends is more common using Fourier Transform Infrared Spectrometry (FT-IR) by transmission mode, but without discussing sample p
J. Aerosp. Technol. Manag.. Publicado em: 07/01/2019
-
2. Changes in the crystalline degree in neutron irradiated EPDM viewed through infrared spectroscopy and inelastic neutron scattering
ABSTRACT The changes in the degree of crystallinity in commercial Ethylene Propylene Diene rubber-type M (EPDM) irradiated with neutrons at different doses has been studied by means of inelastic neutron scattering and infrared absorption spectroscopy experiments. EPDM samples were taken from the housing of non-ceramic electrical insulators which are used in
Matéria (Rio J.). Publicado em: 19/07/2018
-
3. Efficiencies of Dipolymer Rubber Blends (EPDM\FKM) using Common Weight Data Envelopment Analysis
Polymer blends are generally categorized into two main classes: miscible blends that exist in a single homogeneous phase exhibiting synergistic properties and immiscible blends that have 2 or more different phases. There is also a third category of blends called technologically compatible blend, which exist in two or more different phases on micro scale, yet
Mat. Res.. Publicado em: 09/10/2017
-
4. TLC/IR (UATR) off-line coupling for the characterization of additives in EPDM rubber compositions
Abstract The knowledge of the components that constitutes a rubber composition is important to justify the properties of the final device, particularly when it comes to elastomeric compositions used in the aerospace industry. The development of methodologies that can detect components, specially the smallest proportion of the rubbers composition is a constan
Polímeros. Publicado em: 04/03/2016
-
5. TG/FT-IR characterization of additives typically employed in EPDM formulations
Abstract Thermogravimetric analysis coupled to Fourier transform infrared spectroscopy (TG/FT-IR) is a very popular technique for rubbers characterization. It involves analyses of the base polymer and additives. Ethylene–propylene–diene (EPDM) rubbers are frequently investigated by TG/FT-IR; however, the focus has been the degradation te
Polímeros. Publicado em: 2015-06
-
6. Determinação do teor de ENB em EPDM (elastômero puro) por FT-IR de transmissão, por meio de banda relativa
Foi desenvolvida uma metodologia para a determinação do teor de 5-etilideno 2-norboneno (ENB) em amostras de borracha (elastômero puro), à base do copolímero de etileno-propileno-dieno (EPDM), por espectroscopia no infravermelho com transformada de Fourier (FT-IR) de transmissão, sendo as amostras analisadas, após pirólise controlada e em bico de Bun
Polímeros. Publicado em: 2015-04
-
7. Influência da modificação da argila montmorilonita nas propriedades mecânicas, termo-mecânicas e morfológicas de nanocompósitos de blendas de poliamida 6/Acrilonitrila-EPDM-estireno
O efeito da organofilização da argila no comportamento mecânico, morfológico e termo-mecânico de nanocompósitos baseados em blendas de poliamida 6 )/acrilonitrila-EPDM-estireno foi estudado. Três nanoargilas foram utilizadas para a preparação dos nanocompósitos: duas montmorilonitas comerciais modificadas organicamente (Cloisite®30B and Cloisite®
Polímeros. Publicado em: 2015-04
-
8. Determinação por FT-IR de transmissão e reflexão (UATR) de etileno e propileno em EPDM
Foi desenvolvida uma metodologia para a determinação dos teores de etileno (ET) e propileno (P) em amostras de borracha (elastômero puro, crua e vulcanizada), à base do copolímero de etileno-propileno-dieno monômero (EPDM), por espectroscopia no infravermelho com transformada de Fourier (FT-IR) de reflexão total atenuada universal (UATR) e de transmis
Polímeros. Publicado em: 2014-12
-
9. Técnicas FT-IR (PAS, UATR e Objetiva ATR) Aplicadas à Caracterização de EPDM Modificada com Plasma
Técnicas FT-IR (UATR, PAS e MIC, com objetiva ATR) foram escolhidas para a caracterização da superfície da borracha de EPDM vulcanizada, após tratamento em plasma de Ar/O2 e N2/H2/Ar gerado em micro-ondas. Após tratamento, grupos oxigenados foram detectados por UATR e MIC/FT-IR, com objetiva ATR para as duas misturas gasosas, e possíveis grupos nitrog
Polímeros. Publicado em: 10/06/2014
-
10. Characterization of additives typically employed in EPDM formulations by using FT-IR of gaseous pyrolyzates
In this study, Fourier transform infrared spectroscopy (FT-IR) was employed to investigate the gaseous pyrolysis products of ethylene - propylene - diene rubber (EPDM). The objective was to evaluate the potential of FT-IR analysis of gaseous pyrolyzates (PY-G/FT-IR) for characterization of EPDM additives. Two EPDM formulations, containing additives typically
Polímeros. Publicado em: 27/05/2014
-
11. Estudo do efeito da adição de PP reciclado nas propriedades mecânicas e de escoamento de misturas de PP/EPDM
Misturas de polipropileno, PP, e terpolímero de etileno-propileno-dieno, EPDM, são amplamente utilizadas na indústria automobilística, principalmente em parachoques, cuja destinação, após o seu uso, deverá atender a Política Nacional de Resíduos Sólidos. No presente trabalho, o efeito da incorporação de PP reciclado nas propriedades mecânicas e
Polímeros. Publicado em: 21/05/2013
-
12. Study by FT-IR Technique and Adhesive Properties of Vulcanized EPDM Modified with Plasma
ABSTRACT: The surface of vulcanized ethylene propylene diene terpolymers (EPDM) was modified by Ar and N2, microwave generated plasma in order to improve adhesion properties. Surface modification was characterized by universal attenuated total reflectance Fourier Transform Infrared (UATR/FT-IR), because it presented lower interference of ingredients of EPDM
J. Aerosp. Technol. Manag.. Publicado em: 2013-03