Electronic Converters
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. An automatic gain control circuit to improve ECG acquisition
Abstract Introduction Long-term electrocardiogram (ECG) recordings are widely employed to assist the diagnosis of cardiac and sleep disorders. However, variability of ECG amplitude during the recordings hampers the detection of QRS complexes by algorithms. This work presents a simple electronic circuit to automatically normalize the ECG amplitude, improving
Res. Biomed. Eng.. Publicado em: 30/11/2017
-
2. ANALISE E PROJETO DO CONVERSOR BUCK INTERCALADO PARA ALIMENTAÇÃO DE LÂMPADAS DE DESCARGA EM ALTA PRESSÃO DE ALTA POTÊNCIA / INTERLEAVED BUCK CONVERTER ANALYSIS FOR HIGH POWER HIGH INTENSITY DISCHARGE LAMPS SUPPLYING
This work presents a detailed analysis about the interleaved buck converter applied to electronic ballasts to supply high power HID lamps, assuming the input voltage as a PFC stage output. As the output capacitor has a maximum value to be applied in parallel with the lamp, parallel operated converters are a suitable choice because the output current ripple c
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/02/2012
-
3. MODELAGEM E CONTROLE DE UM REATOR ELETRÔNICO PARA LÂMPADAS HPS BASEADO NA CONEXÃO DIFERENCIAL DE CONVERSORES CC / MODELING AND CONTROL OF AN ELECTRONIC BALLAST FOR HPS LAMPS BASED ON DIFFERENTIAL CONNECTION OF DC CONVERTERS
This paper presents the development of an electronic ballast for high intensity discharge lamps, using the differential connection technique applied to Flyback converters. The power factor correction stage was implemented by a Buck-Boost converter operating in discontinuous conduction mode. Subsequently, the integrating converters technique was used to simpl
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 28/02/2012
-
4. REATOR ELETRÔNICO PARA LÂMPADAS DE DESCARGA EM ALTA PRESSÃO BASEADO NO CONVERSOR BIFLYBACK INVERSOR / ELECTRONIC BALLAST FOR HIGH INTENSITY DISCHARGE LAMPS BASED ON BIFLYBACK INVERTER TOPOLOGY
O estudo do melhor aproveitamento das características das lâmpadas de descarga em alta pressão vem ao encontro da grande preocupação mundial com a eficientização energética. Reatores eletrônicos são os dispositivos atuais que melhor aproveitam a alta eficácia luminosa e longa vida útil dessas lâmpadas. Este trabalho visa o desenvolvimento de um
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 26/07/2011
-
5. Conversores CC-CC elevadores de tensão, não isolados, com ganhos estáticos elevados / Step-up, non-insulated, high-gain Dc-DC converters
The DC-DC converters have important applications in the electric energy generation using renewable energy sources and in the electric vehicles. In those applications, it is often required that the converter operates with high voltage gain. This work investigates some non-insulated topologies of DC-DC converters that can be used when high voltage gain is nece
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 13/08/2010
-
6. Conversor CC/CA de alta freqüência baseado em inversores ressonantes com comutação seqüencial para excitação de uma tocha indutiva a plasma térmico
This work describes the study, the analysis, the project methodology and the constructive details of a high frequency DC/AC resonant series converter using sequential commutation techniques for the excitation of an inductive coupled thermal plasma torch. The aim of this thesis is to show the new modulation technique potentialities and to present a technologi
Publicado em: 2010
-
7. USE OF ELECTRONIC CONVERTERS TO SUPPLY OF HIGH BRIGHTNESS LEDS WITH APPLICATION IN HUMAN TISSUE AND THEIR INTERACTION THERAPY / UTILIZAÇÃO DE CONVERSORES ELETRÔNICOS QUE ALIMENTAM LEDS DE ALTO BRILHO NA APLICAÇÃO EM TECIDO HUMANO E SUA INTERAÇÃO TERAPÊUTICA
This paper presents a study on the application of high-brightness LED (Light Emitting Diode)to health care. The LEDs are supplied by electronic converters, proposed in order to analyze the light emitted by the LEDs and their interaction with human tissues. Throughout the work, a comparative study between the LED and LASER and their actions on human tissue is
Publicado em: 2009
-
8. DESENVOLVIMENTO DE UMA FAMÍLIA DE REATORES ELETRÔNICOS PARA LÂMPADAS DE MULTIVAPOR METÁLICO EMPREGANDO A TÉCNICA DE CONEXÃO DIFERENCIAL DE CONVERSORES CC/CC / DEVELOPMENT OF AN ELECTRONIC BALLAST FAMILY TO SUPPLY METAL HALIDE LAMPS USING DIFFERENTIAL CONNECTION OF DC/DC CONVERTERS
Esse trabalho apresenta e analisa uma nova família de reatores eletrônicos capazes de acionar lâmpadas de multivapor metálico com tubo de descarga cerâmico. Essas lâmpadas apresentam, dentre as lâmpadas de descarga em alta pressão, a melhor qualidade do fluxo luminoso, além de se tratar de lâmpadas compactas, caracterizando-as como uma ótima alter
Publicado em: 2009
-
9. DIVISORES DE FREQÜÊNCIA POR DOIS PARAMÉTRICOS BALANCEADOS A PHEMT PARA RECEPTORES DE DEFESA ELETRÔNICA / PHEMT BALANCED PARAMETRIC FREQUENCY DIVIDER BY TWO FOR ELECTRONIC DEFENSE RECEIVERS
This work assesses the development of PHEMT balanced parametric frequency dividers by two, intended for application as frequency converters on Electronic Defense digital receivers. The main characteristics of these devices are design simplicity, reduced number of components, possibility of integration in MMIC, phase coherence, wide bandwidth, very good pulse
Publicado em: 2009
-
10. DESIGN OF A COMMERCIAL APPROACH OF ELECTRONIC BALLASTS TO SUPPLY HIGH-PRESSURE SODIUM LAMPS IN PUBLIC LIGHTING / SISTEMATIZAÇÃO DO PROJETO DE REATORES ELETRÔNICOS PARA ALIMENTAÇÃO DE LÂMPADAS DE VAPOR DE SÓDIO EM ALTA PRESSÃO PARA ILUMINAÇÃO PÚBLICA
This thesis presents an electronic ballast prototype to supply high-pressure sodium lamps used in public lighting. The goal is to develop a commercial approach able to replace the still commonly used electromagnetic ballasts, performing improvements in the public lighting system. Along this thesis, the state of art in lighting area is presented, especially i
Publicado em: 2009
-
11. Circuito elevador de tensão de alta eficiencia, controlado por duas fases de clock, implementado em tecnologia CMOS / High efficiency voltage mutiplier circuit, controlled by two clock phases, fabricated in CMOS technology
Este trabalho propõe uma nova estrutura de circuito elevador de tensão de onda completa implementável em tecnologia CMOS padrão, que tem como características relevantes uma eficiência energética maior do que estruturas similares anteriores, seu controle é efetuado por apenas duas fases de clock e também esta estrutura implementa controle de sobre-te
Publicado em: 2009
-
12. Analise, projeto e layout de uma topologia de circuito regulador de tensão para aplicação em microprocessadores / Analysis, desing and layout of a new voltage regulator circuit topology applied to microprocessors
Este trabalho tem como objetivo o estudo de uma arquitetura de regulador de tensão do tipo multi-fase para alimentação de microprocessadores, os quais demandam pequena variação em sua tensão, mesmo face aos seus agressivos transitórios de corrente. O estudo engloba a análise, que descreve as vantagens e desvantagens de topologias de reguladores chave
Publicado em: 2009