Durability Engineering
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Magnetic concentration route for recovering pellet feed fines stored in a mining dam
Abstract The greatest and noblest challenge of mining engineering for the present and the future of iron ore treatment could be considered as the pursuit of optimizing the use of mineral resources. The use of mining tailings, in the mineral sector itself, or in another industrial branch, meets the needs of circular economy as it increases the useful service
REM - International Engineering Journal. Publicado em: 2022
-
2. Pó de borracha reutilizado na confecção de compostos de borracha natural para a produção de peças de engenharia do setor automotivo
Due to the cross-linked structure and the presence of antidegradants, rubber products decomposition is very hard and the disposal of waste material has been caused many environmental problems. Therefore, rubber recycling and the use of it as raw material in fresh rubber compounds are strongly necessary to achieve more sustainable technological projects. The
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2012
-
3. Permeabilidade ao ar do concreto / Air permeability of concrete
Os mecanismos de transporte no interior do concreto são os principais responsáveis pela sua deterioração. Desta maneira, a permeabilidade deste material tem vital importância e influência na sua durabilidade, ou seja, influenciando na principal característica que determina a vida útil para o qual foi projetado. É a permeabilidade que controla a taxa
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/11/2011
-
4. Estudo de métodos de identificação multivariável baseados em subespaços aplicados ao monitoramento da integridade de estruturas / Study of subspace-based identification methods applied to structural health monitoring
Structural Health Monitoring (SHM) is a multidisciplinary research field, which covers techniques, technologies and methods which are essential to perform a continuous and intelligent diagnosis about mechanical structure integrity. The development of structures with improved durability, improved operational safety and reduced maintenance cost are the main re
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/07/2011
-
5. Estudo de durabilidade de rolamentos de roda baseado em rotas brasileiras / Durability study of wheel bearings, based on Brazilian route data
The present work has the objective of defining a load model to estimate the life of wheel bearing, suitable to the conditions of roads in Brazil. A comparative analysis of models of the routes currently available in the literature and practice was conducted and the effect of their loads on the bearing life was analised. A composition of loads extracted from
Publicado em: 2010
-
6. Contribution to the development of performance specifications for concretes containing blast furnace slag / Contribuição ao desenvolvimento de especificações por desempenho para concretos com escoria de alto-forno
In 2008 alone, the annual steel production in Brazil was around 31 million tons. The steel production process generates an average of 500 kg of residues and co-products per ton of steel. From this total, 70% corresponds to the slags. Although investigating the increase of blast furnace slag use is of extreme importance for the concrete and steel industries s
Publicado em: 2010
-
7. Modelagem e análise cinemática de CVT s toroidais : influência dos parâmetros geométricos no desempenho / Modeling and cinematic analysis of toroidal CVT s : influence of the geometric parameters in performance
A aplicação de transmissões continuamente variáveis (CVT s) no mercado automotivo tem crescido ano após ano. Nesse sentido, o objetivo deste trabalho é criar um modelo matemático para avaliar o impacto das variações nos parâmetros geométricos no desempenho de CVT s Toroidais (T-CVT s) em aplicações automotivas. Estas variações permitem a verif
Publicado em: 2010
-
8. Avaliação da durabilidade em vigas de concreto sob diferentes condições de cura e carregamento / Evaluation of durability in concrete beams under different curing conditions and loading
A preocupação com a durabilidade do concreto é crescente no Brasil, devido à grande quantidade de estruturas com sinais avançados de deterioração. Aliadas a essa questão têm-se a importância da cura no desempenho do material e as fissuras que podem surgir ao longo de sua vida útil. O objetivo principal deste trabalho foi avaliar a influência da a
Publicado em: 2010
-
9. O desempenho quanto a durabilidade de alvenarias de blocos ceramicos de vedação com função auto-portante : o caso da habitação de interesse social / Durability performance of seal ceramic blocks masonry with self-supporting functions : low-cost housing case study
O déficit habitacional é um dos maiores problemas sociais não resolvidos no Brasil, estimado em aproximadamente 8 (oito) milhões de moradias. Ao segmento da construção civil compete desenvolver e disseminar sistemas construtivos para o atendimento da demanda por habitações para a população alvo, mais carente de recursos. Contudo, para executar um e
Publicado em: 2009
-
10. Biodegradação de polietileno tereftalato (PET) por fungos ligninoliticos / Biodegradation of polyethylene tereftalate by ligninolytic fungi
In 1977, polyethylene terephthalate (PET), a plastic derived from petroleum, started to be used as raw material for packaging material and engineering plastics. However, under an environmental point of view, the use of plastics is considered problematic because of their high durability and high volume when present in domestic and industrial solid wastes. Thi
Publicado em: 2009
-
11. Fracture mechanics methods applied to medium density polyethylene designed for extrusion of pipes. / Métodos de mecânica da fratura aplicados a polietileno de média densidade destinado à extrusão de tubos.
Medium density polyethylene (MDPE) is a semicrystalline thermoplastic polymer that has been increasingly used in engineering applications, as plastic pipes for water and gas distribution systems. Under constant load, however, this material may occasionally present creep failure, by means of a mechanism of slow crack growth, leading to leakage losses in the s
Publicado em: 2009
-
12. CONTRIBUIÇÃO AO ESTUDO DAS PROPRIEDADES MECÂNICAS E DA DURABILIDADE DE CONCRETOS COM ESCÓRIA DE ACIARIA ELÉTRICA (EAF) COMO AGREGADO GRAÚDO / CONTRIBUTION TO THE STUDY OF MECHANICAL PROPERTIES AND THE DURABILITY OF CONCRETE WITH SLAG OF Residue (EAF) as aggregate
The increasing demand for aggregate for uses in engineering stimulated the search for alternative materials. In this way, the civil construction potentially started to be a great consumer of residues from other industries, becoming a great recycle plant. The use of by-product, brings great environmental benefits in relation to the degradation of the environm
Publicado em: 2007