Cryogenic Treatment
Mostrando 1-12 de 17 artigos, teses e dissertações.
-
1. Influence of Cryogenic Treatment on the Tribological Behaviour of AISI H21 Tool Steel
The aim of the present work was to find out the optimum cryosoaking duration of deep cryogenic treatment to reduce the wear rate. The AISI H21 hot work tool steel specimens were hardened at 1195 ºC, cryotreated at -185 ºC for 6 to 30 h, double tempered at 540 ºC and soft tempered at 100 ºC. The hardness, impact toughness, wear rate and microstructural ch
Mat. Res.. Publicado em: 29/10/2018
-
2. Tribocorrosion and Electrochemical Behavior of DIN 1.4110 Martensitic Stainless Steels After Cryogenic Heat Treatment
DIN 1.4110 martensitic stainless steel is largely used in the cutlery industry due to its high corrosion resistance associated with high mechanical resistance. However, when this material works under corrosion and wear conditions at the same time, their synergistic effect can accelerate the degradation process of the alloy. Cryogenic heat treatments have bee
Mat. Res.. Publicado em: 23/02/2017
-
3. Domain Transformation and MI of Melt-extracted Co68.15Fe4.35Si12.25B13.25Nb1Cu1 Microwires by Cryogenic Joule Annealing
Giant magneto-impedance (GMI) effect and domain transformation for melt-extracted Co68.15Fe4.35Si12.25B13.25Nb1Cu1 amorphous wires have been induced by a cryogenic Joule annealing (CJA) treatment with different DC current amplitude (0~350 mA) for 240s. Experimental results indicate that the maximum GMI ratio ([ΔΖ∕Ζ0]max) achieves to 188.1% with exciting
Mat. Res.. Publicado em: 17/11/2015
-
4. The Effects of Cryogenic Treatment on the Corrosion of AISI D3 Steel
It is well known that cryogenic treatment is used to improve the mechanical properties of a material. Consequently, the use of cryogenic treatment has grown beyond its successful application on tool steels. In this research, the effects of cryogenic treatment on the corrosion of AISI D3 steel in 3.5% NaCl solution were examined by electrochemical impedance s
Mat. Res.. Publicado em: 2015-06
-
5. TPS Nanocomposite reinforced with MFC by melting process
Bionanocomposites of thermoplastic starch (TPS) reinforced with microfibrilated cellulose (MFC) were prepared by melt processing. MFC was prepared from eucalyptus wood pulp by a process combining cryogenic milling in high shear mixers, chemical treatment with sodium hydroxide and ultrasound treatment. The never dried MFC was then dispersed in native starch a
Mat. Res.. Publicado em: 27/06/2014
-
6. Estudo da influência do tratamento criogênico no aço AISI H13 / Study of the influence of cryogenic treatment in AISI H13 steels
Há alguns anos, diversos estudos da influência dos parâmetros do tratamento térmico vêm sendo desenvolvidos, para a obtenção de propriedades que permitam atingir os requisitos de trabalho e que gerem ferramentas de vida útil estendida. Nesse contexto, tem sido demonstrado que o tratamento criogênico não só provoca a transformação da austenita re
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 21/02/2011
-
7. AVALIAÇÃO DO COMPORTAMENTO DE ESPÉCIES DE MERCÚRIO EM PEIXES APÓS DIFERENTES MÉTODOS DE COCÇÃO
Most of studies evaluating Hg in fish have been developed using fresh fish and the few studies involving the assessment of Hg in fish after cooking process, involve only the determination of total Hg and no clear conclusions have been reported. Considering the relatively high temperatures used for the preparation of fish and the volatile characteristics of s
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 2011
-
8. Efeito das adições de tratamentos criogênicos e de alívio de tensões no ciclo térmico do aço ferramenta AISI D2. / The effect of cryogenic and stress relief treatments additions in the thermal cycle of the AISI D2 tool steel.
Foram estudados os efeitos da introdução de etapas de tratamento criogênico e do alívio de tensões no ciclo térmico do aço ferramenta para trabalho a frio AISI D2. Variaram-se as temperaturas de tratamento criogênico, sendo elas principalmente: criogênica (-196°C) e subzero (-80°C). Foram variados os tempos de permanência às temperaturas criogê
Publicado em: 2011
-
9. Influence of cryogenic treatment in the resistance to wear to tool steel AISI D2 / Influência do tratamento criôgênico na resistência ao desgaste do aço para trabalho a frio AISI D2
Trabalhos recentes sobre o tratamento criogênico profundo (TCP) em aços ferramentas mostram que mudanças microestruturais ocorridas no material podem melhorar significativamente a resistência ao desgaste abrasivo e, por conseqüência, a vida da ferramenta ou matriz. Todavia, os fenômenos relacionados ao TCP ainda não são compreendidos de forma plena.
Publicado em: 2009
-
10. Estudo da influência da criogenia na resistência ao desgaste abrasivo do aço ASTM 743 tipo CA6NM
O Tratamento Criogênico Profundo, Deep Cryogenic Treatment (DCT) em inglês, vem sendo muito utilizado na indústria para o melhoramento das propriedades mecânicas dos aços, fundamentalmente a resistência ao desgaste. Neste trabalho foi utilizado tratamento criogênico a 1900C por 20 horas, após tratamento térmico de têmpera e revenido, no aço inoxid
Publicado em: 2009
-
11. Estudo de uma metodologia para estimar a quantidade de carbono em amostras de solo utilizando espectroscopia de emissão óptica com plasma induzido por laser (LIBS) / Study of a methodology to estimate the carbon content in soil samples by laser induced breakdown spectroscopy (LIBS)
Soils are an important component in the biogeochemical cycle of carbon, storing about four times more carbon that biomass plants and nearly three times more than the atmosphere. Moreover, the carbon content is directly related on the capacity of water retention, fertility, among others properties. Thus, soil carbon quantification in field conditions is an im
Publicado em: 2009
-
12. Influência dos tratamentos térmicos e tratamentos criogênicos na tenacidade do aço rápido AISI M2. / Influence of the heat treatments and cryogenic treatments on the toughness of the AISI M2 high speed steel.
In this work the toughness of the AISI M2 high speed steel heat treated by conventional and cryogenic routes has been evaluated. The toughness was evaluated through un-notched impact samples and 3 points bending cylindrical samples. The heat treatments were carried out in a vacuum furnace using nitrogen quenching with 6 bar of pressure. The conventional rout
Publicado em: 2008