Composite Structures
Mostrando 1-12 de 228 artigos, teses e dissertações.
-
1. Composite floor system with CFS trussed beams, concrete slab and innovative shear connectors
Abstract Steel and concrete floor systems are widely applied for buildings and provide excellent structural response, optimized material consumption, reduced beam height, and improved bending strength and stiffness capacity. In recent years, many experimental investigations concerned with new alternatives addressed to efficient interaction between steel and
REM, Int. Eng. J.. Publicado em: 2020-03
-
2. Writing papers with an emphasis on structural geology and tectonics: advices and warnings
Abstract The objective of this short paper was to provide some advice on how to write a geoscience paper of international standard and to warn against some common pitfalls. It is focused on how to structure a paper and stresses the importance of building its contents around a well-defined problem. Furthermore, the importance of moving away from outdated and
Braz. J. Geol.. Publicado em: 13/01/2020
-
3. Large Displacement Static Analysis of Composite Elliptic Panels of Revolution having Variable Thickness and Resting on Winkler-Pasternak Elastic Foundation
Abstract Nonlinear static response of laminated composite Elliptic Panels of Revolution Structure(s) (EPRS) having variable thickness resting on Winkler-Pasternak (W-P) Elastic Foundation is investigated in this article. Generalized Differential Quadrature (GDQ) method is utilized to obtain the numerical solution of EPRS. The first-order shear deformation th
Lat. Am. j. solids struct.. Publicado em: 20/12/2019
-
4. Optimized dimensioning of steel-concrete composite beams
Resumo As seções mistas de aço e concreto estão cada vez mais sendo utilizadas na construção civil, tanto no cenário mundial quanto no Brasil. O trabalho conjunto do perfil de aço e da laje de concreto aumenta consideravelmente o desempenho do elemento estrutural misto devido ao aproveitamento das vantagens de cada material. Neste trabalho, é utiliz
Rev. IBRACON Estrut. Mater.. Publicado em: 13/12/2019
-
5. Analysis of Electronic Apex Locators in Human Teeth Diagnosed With Apical Periodontitis
Resumo Os localizadores eletrônicos apicais têm sido usados para estabelecer o comprimento de trabalho no tratamento do canal radicular. Nos dentes diagnosticados com periodontite apical, a reabsorção das estruturas apicais dos dentes pode levar a dificuldades na obtenção de uma odontometria apropriada. Este estudo comparou três localizadores apicais
Braz. Dent. J.. Publicado em: 28/11/2019
-
6. Experimental evaluation on the structural behavior of truss shear connectors in composite steel-concrete beams
Resumo As estruturas mistas apresentam grandes vantagens quanto a aspectos estruturais e construtivos, sendo os conectores de cisalhamento determinantes para a obtenção da interação entre os elementos estruturais e para a distribuição dos esforços na estrutura, aproveitando-se de forma efetiva da potencialidade de cada material constituinte da estrutu
Rev. IBRACON Estrut. Mater.. Publicado em: 11/11/2019
-
7. Bond strength assessment of a universal adhesive system in etch-and-rinse and self-etch modes
Resumo Introdução A odontologia moderna é refletida na inserção de novos materiais com diferentes formas de adesão nas estruturas dentárias, como o sistema adesivo Universal. Objetivo Avaliar a resistência adesiva do sistema adesivo universal em dentina, na forma de aplicação auto condicionante e convencional, comparando com um sistema adesivo co
Rev. odontol. UNESP. Publicado em: 07/11/2019
-
8. Effect of grape seed extract-containing phosphoric acid formulations on bonding to enamel and dentin
Abstract The aim was to evaluate the effect of 2% grape seed extract (GSE) containing phosphoric acid (PhA) on the bond strength to enamel and dentin. The control group was 37% PhA. The following three PhA formulations with 2% GSE and 20% ethanol were obtained: GSE5 = 5% PhA; GSE10 = 10% PhA; and GSE20 = 20% PhA. The enamel and dentin surfaces of molars were
Braz. oral res.. Publicado em: 28/10/2019
-
9. Frequency Selective Surface Properties of Microwave New Absorbing Porous Carbon Materials Embedded in Epoxy Resin
In this manuscript, the electromagnetic wave absorption properties of sustainable porous carbon composites were evaluated over the X-band frequency range (8.2 - 12.4 GHz). The porous carbon material was made from the byproduct of cellulose production and was used as additive on the development of radar absorbing material (RAM) composites. These porous carbon
Mat. Res.. Publicado em: 21/10/2019
-
10. Crosslinking starch/oat hull mixtures for use in composites with PLA
Abstract Modification of composite components has been proposed as a tool to improve their functional properties. The present work studied crosslinking of a starch/oat hull mixture by reactive extrusion with sodium trimetaphosphate (STMP), for application in composites with polylactic acid (PLA). The treated mixture was characterized regarding degree of subs
Polímeros. Publicado em: 10/10/2019
-
11. Dynamic Arrays Based on Magnetically Controlled Particles: Synthesis and Application
Growth mechanisms of dynamic granular arrays based on magnetically controlled particles are presented. Method of the external rotating magnetic field (ERMF), based on a dipole interaction of magnetic spherical Fe3O4 particles in highly ordered volume arrays is proposed and a design for its practical implementation is developed. The magnetic assembly can resu
Mat. Res.. Publicado em: 19/08/2019
-
12. Properties of zirconia-containing glass-ionomer cement
Resumo Cimentos de ionômero de vidro (CIVs) são utilizados como materiais restauradores dentários devido à sua capacidade de aderir quimicamente ao esmalte e à dentina, baixo coeficiente de expansão térmica e compatibilidade com estruturas dentárias. No entanto, esses materiais têm baixa resistência ao desgaste e fraturas. Neste trabalho, CIVs refo
Cerâmica. Publicado em: 15/08/2019