Composite Materials
Mostrando 1-12 de 655 artigos, teses e dissertações.
-
1. Obtainment of a new metal matrix composite from the recycling of UNS S31803 duplex stainless steel by powder metallurgy
Abstract The purpose of circular economy is to maximize resources efficiency. With the increase in consumption of raw materials, energy and waste generation, recycling is necessary for environmental and industrial reasons. Thus, the powder metallurgy, together with mechanical milling, stands as a new method for scraps recycling. This study aimed to produce U
REM - International Engineering Journal. Publicado em: 2022
-
2. High-barrier and antibacterial films based on PET/SiOx for food packaging applications
Abstract High-barrier and antibacterial materials have potential applications in the field of preservative packaging for fresh meat products. In this paper, UV irradiation and silane coupling agent (KH550) were used to modify the surface of SiOx coating on polyester (PET)/SiOx film to prepare the PET/SiOx/chitosan and PET/SiOx/chitosan-nano-ZnO composite fil
Food Sci. Technol. Publicado em: 2021-09
-
3. Numerical formulation for nonlinear analysis of concrete and steel shells with deformable connections
Abstract A two-dimensional interface finite element capable of associating flat shell elements positioned one above the other was developed. The implemented interface element can physically simulate the contact between the flat shell elements and connect the reference planes of the shell elements above and below it. The formulation presented allows considera
REM, Int. Eng. J.. Publicado em: 2021-09
-
4. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
5. Cold sintering and electric characterization of ZnO-BaTiO3 composites
Abstract The sintering is an essential step in the processing of ceramics materials. A number of researchers have reported new techniques for sintering. However, in general, the process still demands high temperatures. This paper reports the results of the cold sintering of ZnO-BaTiO3 composites. The microstructural, structural, and electric properties of th
Cerâmica. Publicado em: 2021-03
-
6. Properties of Cu-Co Composite Catalysts for Synthesis of Aliphatic Alcohols
Cu-Co-containing cellulose-based carbon composite materials (Cu-Co/Cel) were formed by a matrix isolation method. Using X-ray diffraction (XRD), transmission electron microscopy (TEM), infrared-Fourier spectroscopy (IR-Fourier spectroscopy), and non-isothermal research methods, the physicochemical properties of the composites were established. The catalysts
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
7. New Strategy for Streptavidin Detection Using AuNRs/PAAm Hydrogel Composites
Localized surface plasmon resonance (LSPR) is a collective oscillation of free electrons induced by the incident light in nanometric surfaces of conductive materials. Gold nanorods (AuNRs) have been studied for plasmonic devices due to their anisotropic properties. Herein, we report the construction of a specific biosensor using polyacrylamide (PAAm) as the
J. Braz. Chem. Soc.. Publicado em: 2020-09
-
8. Rapid Determination of Vitamins D2 and D3 in Dairy Products by High-Performance Liquid Chromatography after Solid Phase Extraction Based on Polystyrene/Polypyrrole Composite Nanofibers
The detection of vitamin D in complex samples is challenging because of the instability of vitamin D in sample preparation. To resolve this problem, packed-fiber solid-phase extraction (PFSPE) has been successfully developed for the pre-treatment of samples containing vitamin D2 (D2) and vitamin D3 (D3) in dairy products. Based on PFSPE, vitamin D could avoi
J. Braz. Chem. Soc.. Publicado em: 2020-06
-
9. Upconversion 3D Printed Composite with Multifunctional Applications for Tissue Engineering and Photodynamic Therapy
Upconversion nanoparticles (UCNPs) are suitable materials for bioapplications due to their ability to emit visible light under near infrared (NIR) excitation, in the biological transparency range. Polycaprolactone(PCL)-based scaffolds are widely used in tissue engineering in combination with inorganic compounds to improve bioactivity and osteoconductive prop
J. Braz. Chem. Soc.. Publicado em: 2020-04
-
10. EVALUATION OF POLY(VINYL ALCOHOL) ADDITION EFFECT ON NANOFIBRILLATED CELLULOSE FILMS CHARACTERISTICS
ABSTRACT In this study, based on the mechanical shear treatment, the cellulosic pulp was fibrillated in nanofibrils dispersed in aqueous suspension. Nanofibrillated Cellulose (NFC) matrix - Polyvinyl Alcohol (PVA) nanocomposite films’ were prepared by casting from NFC/PVA suspension mixtures. The thermal and mechanical properties of the obtained films were
CERNE. Publicado em: 2020-03
-
11. Seismic resistance performance of a utility tunnel in saline soil foundation based on new cementitious composite materials
Abstract Because soluble salt in saline soil dissolves with water, utility tunnels built in saline soil foundation are more likely to damage due to by groundwater and earthquake. In this study, new cementitious composite materials were developed by using slag, building gypsum, quicklime, and magnesia. The unconfined compressive strengths of the saline soil s
Lat. Am. j. solids struct.. Publicado em: 10/01/2020
-
12. Analysis of enamel and material wear by digital microscope: an in-vitro study
Abstract: The objective of the study was to analyze the surface area (SA) of the wear caused by simulated chewing on human enamel and opposing restorative material, namely: composite resin (CR), porcelain fused to metal (PFM), lithium disilicate (LD), or monolithic zirconia (MZr). Forty-eight premolars were selected as enamel specimens and divided randomly i
Braz. oral res.. Publicado em: 10/01/2020