Ceramics
Mostrando 1-12 de 555 artigos, teses e dissertações.
-
1. A review on the production of porous ceramics using organic and inorganic industrial waste
Abstract The use of industrial waste in compositions of ceramic masses has attracted great interest from the scientific community, as they can be considered abundant and diversified alternative sources of raw materials. At the same time, there is a growing interest in the development of porous ceramics due to their wide possibilities for use in various field
Cerâmica. Publicado em: 2022
-
2. Preparation of Silicon Oxycarbide (SiCO) Ceramics from Different Polymer Architectures and Assessment on the Performance as Electrodic Materials for Voltammetric Sensing of Antioxidant Phenolic Compounds
Silicon oxycarbide (SiCO) ceramics obtained from polymer pyrolysis and with varied carbon contents were prepared and evaluated as new electrodic materials for sensing of tert butylhydroquinone (TBHQ) and butylated hydroxyanisole (BHA) antioxidants. Three polymers were synthesized varying molecular architecture and aromatic carbon groups, followed by pyrolysi
Journal of the Brazilian Chemical Society. Publicado em: 2022
-
3. Properties and technical characteristics of Casira pottery, Jujuy, Argentina
Abstract In this work, the results of a multi-technique characterization of a type of pottery production with high cultural and economic relevance from the only potter town in Argentina are presented and correlated. Raw materials, a prepared paste, and ceramic samples were studied. Chemical, structural, textural, microstructural, and thermal features were as
Cerâmica. Publicado em: 2022
-
4. Numerical simulations of ceramic firing in catenary kilns
Abstract Kiln geometries were developed to reach homogeneous temperatures above 900 °C, during the firing process, aiming to improve the production process of the ceramists from Vale do Jequitinhonha (MG/Brazil). Techniques of reactive flow numerical solution using the software Ansys CFX have been used to foresee the behavior of the firings. Two types of ca
Cerâmica. Publicado em: 2022
-
5. Colorimetric analysis of dental porcelains: effects of the background color
Abstract This study evaluated how the background (white or gray) affects the color parameter measurements and color difference calculations (∆Eab and ∆E00) of dental ceramics. Disc-shaped feldspathic ceramic specimens were prepared with two shades (enamel and dentin) and stained in red wine (7-day immersion). A spectrophotometer was used to perform color
Cerâmica. Publicado em: 2022
-
6. Evaluation of the self-healing capacity of ceramics produced with alumina and silicon carbide
Abstract The self-healing capacity of a ceramic material produced by uniaxial pressing with alumina (Al2O3), silicon carbide (SiC), and magnesium oxide (MgO) was evaluated. To assess self-healing, a discontinuity was generated on the surface of the specimens. The healing time in the oven, at a temperature of 1000 ºC, was 1, 30, and 60 min. The specimens wer
Cerâmica. Publicado em: 2022
-
7. Easily applicable protocol to formulate inks for extrusion-based 3D printing
Abstract 3D printing is a disruptive technology that is a key driver of the new industrial revolution. Among the various 3D printing methods, direct-ink-writing (DIW) takes a viscous ink material, extrudes it through a nozzle, and deposits it layer-by-layer to create 3D objects. DIW is a versatile method that can print ceramics, polymers, metals, living cell
Cerâmica. Publicado em: 2022
-
8. Study of Crystallization and Composition on Silicon Oxycarbide (SiOC) and Silicon Boron Oxycarbide (SiBOC) Ceramics Obtained from Alkoxysilanes Precursors
This work deals on the preparation of silicon oxycarbide (SiOC) and silicon boron oxycarbide (SiBOC) ceramics from pyrolysis involving alkoxysilanes with different organic groups. Boron content, organic substituent and annealing time were evaluated on crystallization and composition of resulting ceramics. B-free precursors composed of methyltriethoxysilane (
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
9. Dolomite-zirconia reaction sintered bonded coarse magnesia ceramics: effect of the bonding proportion
Abstract Refractory ceramic materials were manufactured, mainly composed of magnesia grains (coarse and medium fraction) and CaZrO3/MgO as a binding phase produced from the reaction sintering between CaMg(CO3)2 (dolomite) and m-ZrO2 (monoclinic zirconia), which constituted the finer fraction. Different relationships between the proportion and the size of the
Cerâmica. Publicado em: 2021-06
-
10. Thermoelectric properties of barium doped calcium cobaltite obtained by simplified chemical route
Abstract Calcium cobaltite (CCO) thermoelectric ceramics in Ca3Co4O9 and Ca2.95Ba0.05Co4O9 compositions were produced by a simplified chemical route developed in this study. Undoped ceramics sintered at 1193 K for 12 h presented a bulk density equivalent to 77% of the theoretical density, one of the highest values ever found for conventionally sintered undop
Cerâmica. Publicado em: 2021-03
-
11. Influence of sintering parameters on the microstructure and mechanical properties of nanosized 3Y-TZP ceramics
Abstract The fracture toughness of 3Y-TZP ceramics obtained from a nanocrystalline powder with an optimized microstructure and highly transformable tetragonal grains was investigated. Samples of ZrO2-3 mol% Y2O3 were sintered at temperatures between 1250 and 1400 °C, with isothermal holding times of up to 16 h. Samples sintered at 1250 °C exhibited relativ
Cerâmica. Publicado em: 2021-03
-
12. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03