Ceramic Blocks
Mostrando 1-12 de 62 artigos, teses e dissertações.
-
1. Methodology for evaluation of the influence of roughness and capillary absorption of ceramic blocks on the render’s tensile bond strength
Abstract The literature indicates that it is difficult or even impossible to associate with strong statistical confidence the bond strength of a mortar coating with the properties of the ceramic block, such as roughness and water absorption. In this work, it is assumed that the variability in capillary water absorption and roughness, and the use of methods t
Cerâmica. Publicado em: 2022
-
2. Influence of hydrofluoric acid etching time and concentration on shear bond strength of metal brackets to ceramic surfaces
Resumo Introdução O tratamento de superfície prévio a colagem de braquetes a cerâmica com ácido fluorídrico, é indicado devido a sua capacidade de promover alterações morfológicas necessárias para a adesão. Objetivo Avaliar a resistência de união ao cisalhamento (RUC) de braquetes metálicos unidos à superfície cerâmica feldspática sob a
Rev. odontol. UNESP. Publicado em: 13/12/2019
-
3. Influência do método de limpeza da zircônia na adesão da prótese após a contaminação com saliva
Resumo Introdução A contaminação das restaurações de zircônia com saliva antes da cimentação influencia na resistência da adesão face à afinidade com os íons da saliva. Objetivo Analisar os métodos de limpeza da zircônia na adesão à dentina após a contaminação com saliva. Material e método Oitenta amostras de zircônia com dimensão 4
Rev. odontol. UNESP. Publicado em: 26/09/2019
-
4. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019
-
5. Brittleness index and its relationship with materials mechanical properties: Influence on the machinability of CAD/CAM materials
Abstract: The aim of this study is to evaluate the machinability of four CAD/CAM materials (n = 13) assessed by brittleness index, Vickers hardness, and fracture toughness and interaction among such mechanical properties. The materials selected in this in vitro study are Feldspathic ceramic [FC], Lithium-disilicate glass ceramic [LD], leucite-reinforced glas
Braz. oral res.. Publicado em: 04/04/2019
-
6. Effect of Self-Etching Primer Associated to Hydrofluoric acid or Silane on Bonding to Lithium Disilicate
Resumo Avaliar o efeito da combinação de ácido fluorídrico ou silano com o primer autocondicionante de cerâmicas sobre a eficácia da união imediata e após 1 ano de armazenamento em água, padrão de condicionamento e interação química desses tratamentos com o dissilicato de lítio. Um total de 16 blocos CAD/CAM de dissilicato de lítio (DL) foram
Braz. Dent. J.. Publicado em: 04/04/2019
-
7. Influência da espessura de revestimentos de argamassa no desempenho acústico de alvenarias de blocos cerâmicos
Resumo Percebe-se uma maior preocupação com o desempenho das edificações habitacionais após a publicação da NBR 15575 (ABNT, 2013a), tornando indispensável a avaliação e possível adequação de sistemas construtivos e seus materiais para atendimento dos requisitos. Dentre as imposições relativas à habitabilidade, encontra-se o desempenho acúst
Ambient. constr.. Publicado em: 2019-04
-
8. Avaliação da adição de resíduos de vidro sodo-cálcico e erva-mate em matriz cerâmica
Resumo O presente trabalho avaliou os efeitos da adição de resíduos de vidro sodo-cálcico e de erva-mate sobre a absorção de água, porosidade e resistência mecânica de um material cerâmico. Os pós homogeneizados foram compactados por prensagem uniaxial e submetidos a queima de 900 e 1100 °C a 2 °C.min-1. Os resultados mostraram que a adição de
Cerâmica. Publicado em: 2019-01
-
9. The effect of hydrofluoric acid and resin cement formulation on the bond strength to lithium disilicate ceramic
Abstract To investigate how the hydrofluoric acid (HF) concentrations applied to a lithium disilicate glass-ceramic (EMX) affects the surface morphology and microtensile bond strength (μTBS) of ceramics to dentin, using light-cured resin cements with or without UDMA. Sixty-three EMX square ceramic blocks were etched for 20 seconds using different HF concent
Braz. oral res.. Publicado em: 24/05/2018
-
10. Bond strength between a polymer-infiltrated ceramic network and a composite for repair: effect of several ceramic surface treatments
Abstract: The effects of several ceramic surface treatments on bond strength of a polymer-infiltrated ceramic network and resin composite as repair material were evaluated. CAD-CAM blocks of a polymer-infiltrated ceramic network (Vita Enamic) were sliced and subjected to aging process, followed by embedding in acrylic resin. The bonding/repair area was treat
Braz. oral res.. Publicado em: 05/04/2018
-
11. Effect of filler size and filler loading on wear of experimental flowable resin composites
Abstract The relationship between wear resistance and filler size or filler loading was clarified for the universal resin composite; however, their relationship in flowable resin composites has not been clarified. Objectives: The purpose of this study was to investigate the effect of filler size and filler loading on wear of experimental flowable resin comp
J. Appl. Oral Sci.. Publicado em: 01/02/2018
-
12. The marginal fit of lithium disilicate crowns: Press vs. CAD/CAM
Abstract: This study aimed to compare the vertical marginal gap of teeth restored with lithium disilicate crowns fabricated using CAD/CAM or by pressed ceramic approach. Twenty mandibular third molar teeth were collected after surgical extractions and prepared to receive full veneer crowns. Teeth were optically scanned and lithium disilicate blocks were used
Braz. oral res.. Publicado em: 22/01/2018