Cement Mortar
Mostrando 1-12 de 104 artigos, teses e dissertações.
-
1. Mechanical properties and fractography of cement-based composites reinforced by natural piassava and jute fibers
Abstract Today’s demand for environmentally friendly and energy-efficient solutions to the construction industry has driven researchers to match natural resources with traditional technics to develop new building technologies. However, there are literature limitations about the correlation of fiber-matrix interface with the failure of natural fibers in mor
Cerâmica. Publicado em: 2022
-
2. Evaluation of the use of blast furnace slag as an additive in mortars
Abstract Clinker is the raw material used in the manufacture of cement. However, this material is very harmful to the environment, since it is estimated that for every ton of clinker produced, about 1.0 ton of CO2 is released into the atmosphere. For this reason, alternatives were sought for the use of other materials that are less harmful to the environment
REM - International Engineering Journal. Publicado em: 2022
-
3. Effects of the addition of graphene on the compressive strength of geopolymeric mortar developed from k-feldspar mining waste
Abstract Contemporary organizations are showing a growing interest in the reuse of solid waste from industrial processes with the intention of reducing environmental impacts and reducing costs. The mining activity is one of the main waste generators in Brazil. In parallel, geopolymeric materials have been gaining prominence in studies that make it a possible
REM, Int. Eng. J.. Publicado em: 2021-09
-
4. Ternary system Portland cement-calcium aluminate cement-calcium sulfate applied to self-leveling mortar: a literature review
Abstract The modernization of building systems is increasingly demanding products that improve efficiency during their processing. The development of self-leveling mortars for the regularization of flooring is a consequence of this evolution. The high contents of binder and water to obtain self-flowing property, plus the application of thin layers over large
Cerâmica. Publicado em: 2021-03
-
5. Evaluation of mortars produced with Baosteel slag short flow (BSSF) steel slag as fine aggregate
Abstract The objective was to evaluate the influence of Baosteel slag short flow (BSSF) steel slag, a byproduct of a Brazilian steel mill, as a fine aggregate on the properties of fresh state and on the compressive strength of mortars. The experimental work was to characterize the BSSF steel slag and to produce simple mortars (only cement) and mixed mortars
Cerâmica. Publicado em: 2021-03
-
6. Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate
Abstract The influence of using carbon nanotubes to improve bond strength between textiles reinforced mortar and concrete was investigated. Forty-two specimens were tested using double-shear test to evaluate the effect of various parameters such as CNTs addition, type of textile material, bond length and width, and number of TRM layers on the bond behavior.
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
7. Mechanical behavior and durability of mortars with quartzite and Portland cement after sulfate attack
RESUMO Os resíduos de rochas ornamentais, especialmente quartzito, causam grande impacto ambiental. Mais impulso tem sido dado à pesquisa sobre a reciclagem desses resíduos nos últimos anos, particularmente para uso como agregados em concreto e argamassa. No entanto, os estudos realizados até o momento não mencionam o comportamento da argamassa mistura
Matéria (Rio J.). Publicado em: 25/11/2019
-
8. Estudo experimental do fluxo de umidade em argamassas de cal aérea
RESUMO Uma parte significativa do património histórico construído ao redor do mundo é constituída de alvenaria estrutural, com juntas preenchidas com argamassa. Nesses sistemas estruturais, a argamassa usualmente representa uma parcela pequena/moderada do volume total da estrutura, no entanto, a argamassa é reconhecida como a principal fonte de movimen
Matéria (Rio J.). Publicado em: 25/11/2019
-
9. Evaluation of Mechanical Properties of Sealing Mortar with Partial Replacement of Portland Cement by Stone Crusher Waste
Civil construction is one segment responsible for major environmental and social impacts. Among its raw materials, Portland cement, which is produced by the burning and subsequent grinding of a composition of clays and limestones. This manufacturing process causes great environmental damage, both by the exploitation of deposits and by the process of clinkeri
Mat. Res.. Publicado em: 23/09/2019
-
10. Statistical analysis of mechanical properties of mortars with fly ash and waste tire rubber
Resumo Este artigo tem como objetivo efetuar a análise estatística dos efeitos da inclusão da borracha de pneus inservíveis e cinza volante oriunda de usinas termelétricas como componentes da argamassa para revestimento de edificações. Foram produzidas argamassas de referência e argamassas contendo borracha com dimensão máxima dos grãos de 0,71 mm
Rev. IBRACON Estrut. Mater.. Publicado em: 23/09/2019
-
11. Lime Addition Effect on Corrosion of Reinforced Mortar
ABSTRACT This study aims to investigate the effect of lime addition in cement mortar on corrosion resistance of carbon and galvanized steel reinforcements. Mixed mortars were studied containing three contents of lime (6.7, 13.3, and 26.3 wt.%). The water retention, incorporated air, and compression strength of reinforced mortars were determined. Immersion te
Matéria (Rio J.). Publicado em: 16/09/2019
-
12. Efeito dos ácidos itacônico e fumárico na copolimerização em emulsão do estireno com acrilato de n-butila para produção de argamassa cimentícia
RESUMO Monômeros carboxílicos são frequentemente empregados em formulações de polímeros obtidos via polimerização em emulsão e miniemulsão visando melhorar ás propriedades de aplicação dos látexes. O objetivo deste trabalho foi avaliar o efeito dos ácidos itacônico IAI), fumárico (AF) e metacrílico (AMA) na copolimerização em emulsão do
Matéria (Rio J.). Publicado em: 16/09/2019