Casting
Mostrando 1-12 de 570 artigos, teses e dissertações.
-
1. Effects of plaster to water ratio on physical and mechanical properties of ceramic pieces produced by the slip casting process
Abstract In the slip casting process, the relationship between the amount of plaster and water used in the production of molds influences the production of ceramic materials, because the higher the water content in the mixture, the lower the mechanical strength of the mold and higher the water absorption rate. In order to evaluate the influence of the variat
Cerâmica. Publicado em: 2022
-
2. Casting the net: early Atlantic fisheries and colonial expansion, 15-16th centuries
Resumo: Este artigo explora o papel desempenhado pela pesca comercial oceânica na expansão europeia na bacia atlântica ao longo dos séculos XV-XVI. Utiliza os exemplos da Islândia, Rio do Ouro e Terra Nova como representativos das novas operações de pesca, e explica como eles funcionaram como sistemas de exploração de recursos. Argumenta que essas p
Tempo. Publicado em: 2022
-
3. Behavior of plaster with water-repellent additive under natural aging
Abstract This research evaluates the behavior of plaster with a water-repellent additive when submitted to a natural aging process. Casting plaster and silane/siloxane-based water-repellent were used as materials. The water/plaster ratio was set at 0.7 and the contents of 0.2% and 0.4% of water-repellent were used, in relation to the plaster mass. Plaster pa
Cerâmica. Publicado em: 2022
-
4. Freeze-casting applied to ceramic materials: a short review of the influence of processing parameters
Abstract In recent years there is a high interest in the freeze-casting process because it is a simple, economical, and environmentally friendly method for obtaining highly porous materials. Most of the materials obtained by this technique have directional pore structure and anisotropic properties. However, a wide range of pore size and morphology can be obt
Cerâmica. Publicado em: 2021-03
-
5. Obtenção de cerâmicas de alumina com porosidade graduada processadas pelas técnicas de colagem de barbotina e freeze casting
Resumo O objetivo foi estudar o processamento de materiais cerâmicos de alumina com porosidade graduada a partir das técnicas de freeze casting e colagem de barbotina sequencial, utilizando hidróxido de alumínio como fase de sacrifício. Após conformação, a porosidade foi caracterizada por microscopia eletrônica de varredura, medidas de porosidade ap
Cerâmica. Publicado em: 2021-03
-
6. Green biosynthesized Satureja rechingeri Jamzad-Ag/poly vinyl alcohol film: quality improvement of Oncorhynchus mykiss fillet during refrigerated storage
Abstract The nanosilver food packaging films were developed by polyvinyl alcohol activated with Satureja rechingeri extract (S-AgNPs/PVA) using the solvent casting to evaluate the freshness of Oncorhynchus mykiss fillets during 14 days at the refrigerated temperature. The 160 pieces of fish were enfolded in 4 types of films as main group-series. The main com
Food Sci. Technol. Publicado em: 2021-03
-
7. Fitas de fosfato tricálcico com quitosana obtidas via tape casting aquoso
Resumo O fosfato tricálcico (TCP) é um biomaterial que está sendo produzido em diversas aplicações biomédicas, além de sua biocompatibilidade e capacidade osteocondutora. Polímeros biodegradáveis de origem natural ou sintética, como quitosana e poli(álcool vinílico) (PVA), vêm sendo utilizados para aplicações de engenharia de tecidos por apres
Cerâmica. Publicado em: 2020-12
-
8. Antibacterial activity of polyvinyl alcohol (PVA)/ε-polylysine packaging films and the effect on longan fruit
Abstract Biodegradable and antimicrobial films via combing ε-polylysine (ε-PL) and polyvinyl alcohol (PVA) is a promising material for food packaging. We prepared the ε-PL/ PVA films with the ε-PL content of 0%, 1%, 3%, 5% and 7% (wt., relative to PVA) by casting method and their physical and chemical properties were characterized. SEM indicated the surf
Food Sci. Technol. Publicado em: 2020-12
-
9. Optical Fiber Coupler Analysis Using Daubechies Wavelets
Abstract This article presents the theoretical analysis of a signal coupling between a proposed Photonic Crystal Fiber (PCF) and a Conventional Fiber with Step Index (CFSI) system. In this analysis, the Finite Element Method (FEM) and Beam Propagation Method (BPM) are applied together with Daubechies wavelets as basis function and described in the mathematic
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2020-09
-
10. Maximization of the use of casting sand residue in the production of fired ceramic bricks
Abstract In this study, a red ceramic was developed with the addition of sand residue from deburring and finishing processing of cast iron molds, replacing a variable fraction of the clay. The formulated masses were shaped by pressing and firing at different temperatures (850, 900 and 1000 ºC) at a heating rate of 180 ºC/h and 2-hour level. The bodies were
REM, Int. Eng. J.. Publicado em: 2020-09
-
11. INCORPORATION OF ESSENTIAL OILS FROM Piper aduncum INTO FILMS MADE FROM ARROWROOT STARCH: EFFECTS ON THEIR PHYSICOCHEMICAL PROPERTIES AND ANTIFUNGAL ACTIVITY
Starch is a promising source of biopolymers and the incorporation of essential oils (EOs) into it can improve some biological properties of films. This study aimed at developing and characterizing barrier, biodegradability and optical properties of biopolymeric films made from arrowroot starch and at incorporating EOs from Piper aduncum leaves and infloresce
Quím. Nova. Publicado em: 2020-06
-
12. Processo de freeze casting para a geração de porosidade graduada em cerâmicas de Al 2 O 3
Resumo Foram efetuadas a preparação e a caracterização de materiais cerâmicos de alumina com gradientes funcionais de porosidade utilizando o método de freeze casting. Foram estudados os efeitos dos parâmetros da rota de processamento na formação dos poros. As características dos poros foram analisadas quanto à morfologia e distribuição na matri
Cerâmica. Publicado em: 2020-03