Carbon Fiber
Mostrando 1-12 de 230 artigos, teses e dissertações.
-
1. Utilization of the Corncob Agro-Industrial Residue as a Potential Adsorbent in the Biosorption of Bisphenol-A
The presence of plastic waste in water bodies has led to a growing concern due to the impact on human health. Among the most important plastic additive molecules is bisphenol-A (BPA). On the other hand, micro-pollutant removal processes that make use of agro-industrial waste have aroused the interest of researchers. This is because the accumulation of lignoc
J. Braz. Chem. Soc.. Publicado em: 2021-07
-
2. Voltammetric Generation and Kinetic Stability of Nitro Anion Radical from Nitrofurazone in Ionic Liquids
The nitrofurazone (NF) electrochemical reduction has been studied by cyclic voltammetry (CV) and square wave voltammetry (SWV) in non-aqueous medium using three different ionic liquids (IL): BMImTf2N, BMImBF4 and BMMImTf2N, having a carbon fiber microelectrode as working electrode. In all of them, two reversible cathodic peaks were recorded for NF. Under hig
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
3. Preparation of Poly(3-hydroxybutyrate-b-ε-caprolactone) by Reactive Extrusion and Production of Electrospun Fibrous Mats
Poly(3-hydroxybutyrate) (PHB) has been proposed to be a potential candidate to be used as biomaterial. However, its poor processability, high brittleness and rigidity have limited its applicability. Transesterification reactions with poly(ε-caprolactone) (PCL), one of the most promising biomedical materials, emerge as an attractive alternative to improve it
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
4. Interfacial bond-slip relationship between Carbon Fiber Reinforced Polymer Plate and Concrete after High Temperature of Asphalt Paving Construction
Abstract The bond-slip relationship of Carbon Fiber Reinforced Polymer (CFRP) plate-concrete after the influence of high temperature action of Stone Mastic Asphalt (SMA) paving was investigated in this article. Two groups of double shear specimens with different bonding length were designed and tested. Based on the test results, the failure modes of specimen
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
5. Bond strength evaluation between textiles reinforced mortar with carbon nanotubes and concrete substrate
Abstract The influence of using carbon nanotubes to improve bond strength between textiles reinforced mortar and concrete was investigated. Forty-two specimens were tested using double-shear test to evaluate the effect of various parameters such as CNTs addition, type of textile material, bond length and width, and number of TRM layers on the bond behavior.
Lat. Am. j. solids struct.. Publicado em: 25/11/2019
-
6. Strain-deformation Reconstruction of Carbon Fiber Composite Laminates Based on BP Neural Network
The Carbon Fiber Reinforced Polymer (CFRP) laminate structural components used in the aerospace and military domains require high precision and strong stability. Usually the deformation of these structural components is difficult to be measured directly during operation, but the deformation of the CFRP laminate structure can be reconstructed with strain info
Mat. Res.. Publicado em: 14/11/2019
-
7. Soil carbon accumulation in cotton production systems in the Brazilian Cerrado
ABSTRACT. Sustainable production systems, such as the no-tillage system (NTS), have a tendency to increase organic carbon in the soil. However, in Brazilian cotton production, the conventional tillage system (CTS) is predominant, and long-term studies on cotton crop under the NTS are scarce. The present study aimed to evaluate the effect of soil management a
Acta Sci., Agron.. Publicado em: 21/10/2019
-
8. Potencial antimicrobiano de diferentes retentores intrarradiculares frente a Enterococcus faecalis: uma avaliação in vitro
Resumo Introdução O tratamento endodôntico tem como objetivo erradicar microrganismos bacterianos e fúngicos do canal radicular, ou pelo menos possibilitar sua redução para níveis compatíveis com a saúde do tecido perirradicular, uma vez que, após o tratamento endodôntico, colônias de microrganismos residuais podem estar presentes nos túbulos d
Rev. odontol. UNESP. Publicado em: 23/09/2019
-
9. Obtenção e caracterização de copolímeros de Poliacrilonitrila (PAN) para uso em processos de fiação em extrusora
RESUMO A disponibilidade de novos materiais, processos e equipamentos sempre traz perspectivas favoráveis ao mercado. A busca por processos alternativos e pela redução do custo da obtenção de precursores de materiais de alto desempenho tem se tornado primordial para o desenvolvimento do setor industrial de produtos com valores mais acessíveis, visando
Matéria (Rio J.). Publicado em: 16/09/2019
-
10. An Anchorage System for Enhanced Bond Behavior between Carbon Fiber Reinforced Polymer Sheets and Cracked Concrete
Abstract The contribution of CFRP wraps, as an anchorage system, to enhancing bond behavior between CFRP sheet and cracked concrete, was investigated. Thirty six concrete blocks (150 x 150 x 200 mm) were cast with 3ϕ12 mm steel bars embedded laterally at different spacing along the 200-mm-dimension. Half of the moist-cured blocks were subjected to a cyclic
Lat. Am. j. solids struct.. Publicado em: 05/09/2019
-
11. Microtensile bond strength of root canal dentin treated with adhesive and fiber-reinforced post systems
Abstract Nowadays, demand for esthetic restorations has risen considerably; thus, nonmetal esthetic posts made of either high-strength ceramics or reinforced resins, such as fiber-reinforced resin posts, have become more and more popular. Important characteristics of fiber-reinforced posts involve a modulus of elasticity similar to dentin and their ability t
Braz. oral res.. Publicado em: 01/07/2019
-
12. Study of epoxy composites and sisal fibers as reinforcement of reinforced concrete structure
Resumo A aplicação de reforço estrutural tem apresentado crescimento significativo nos dias atuais. O desenvolvimento de novos materiais para tal finalidade tem despertado o interesse de muitos pesquisadores. O presente trabalho teve por objetivo avaliar a viabilidade técnica da produção e aplicação de polímeros reforçados com fibras vegetais (PRFV
Rev. IBRACON Estrut. Mater.. Publicado em: 20/05/2019