Bubbles
Mostrando 1-12 de 209 artigos, teses e dissertações.
-
1. Relevance of Resin for Photoelasticity
The goal of this study is to test photoelastic resins for manufacturing models with teeth and/or implants under chewing load. Four commercial brands have been chosen: Araldite (Ciba Chemicals), Flexible GIV-Rigid GIV (Polipox) and PL2 (Measurements Group). Nine discs were manufactured, four of them from each of the photoelastic resin brands and five from dif
Mat. Res.. Publicado em: 20/01/2020
-
2. NUMERICAL AND EXPERIMENTAL INVESTIGATION OF AIR-WATER SYSTEM TO SIMULATE BUBBLE DYNAMICS IN LIQUID SODIUM POOL
Abstract The dynamics of rising bubbles in a liquid sodium pool plays a significant role in the estimation of the radiological source term during anticipated transients and normal operation of a fast reactor. Sodium is chemically reactive with air and water. Therefore, carrying out experiments using sodium on a reactor scale level requires extra precautions.
Braz. J. Chem. Eng.. Publicado em: 13/01/2020
-
3. Efeito da adição de resíduo de vidro em massa de cerâmica de alvenaria
RESUMO Este trabalho investigou o efeito da adição de resíduo de vidro para fabricação de cerâmica de alvenaria. Foram conformados corpos-de-prova cilíndricos de 27 mm de diâmetro por 45 mm de altura, a partir da massa padrão de uma indústria de cerâmica vermelha e outras 3 formulações (5, 10 e 20%) com incorporação de vidro, baseado em estudo
Matéria (Rio J.). Publicado em: 25/11/2019
-
4. Interrelation Among Morphology, Mechanical Properties and Oxidation Behavior of NbxAlyNz Thin Films
NbxAlyNz thin films were deposited by magnetron sputtering reactive technique with (y/x+y) ratio varying from 0 to 0.4, in order to maintain aluminum atoms inside NbN matrix in solid solution. GAXRD analyses revealed that the crystalline phase obtained for NbxAlyNz thin films was B1-NbN with a lattice constant shrinkage as Al concentration at these coatings
Mat. Res.. Publicado em: 07/11/2019
-
5. Investigação do Fenômeno das Bolhas em Soldagem Subaquática Molhada com Arame Tubular Autoprotegido
Resumo O fenômeno de formação de bolhas está fortemente ligado a variação dos sinais elétricos e estabilização do arco de solda na soldagem subaquática molhada com arame tubular (FCAW). O bom entendimento desses fenômenos pode ser usado para uma melhor otimização dos parâmetros de soldagem e consequentemente uma melhoria na qualidade final da
Soldag. insp.. Publicado em: 15/08/2019
-
6. ESTERIFICATION OF OLEIC ACID IN A SEMI-BATCH BUBBLE REACTOR FOR BIODIESEL PRODUCTION
ABSTRACT A semi-batch bubble reactor has been developed to produce fatty acid ethyl ester (biodiesel) by acid-catalyzed esterification of oleic acid with superheated ethanol vapor. In this paper, the effects of reaction temperature (110, 130 and 150°C), ethanol volumetric flow rate (1.35, 2.50 and 3.65 mL/min) and vapor bubble size on the reactor performanc
Braz. J. Chem. Eng.. Publicado em: 15/07/2019
-
7. O PAPEL DE SUBORDINADO REAL DO CONSELHEIRO POLÔNIO EM QUATRO ADAPTAÇÕES DE HAMLET, DE SHAKESPEARE, PARA OS QUADRINHOS
RESUMO Elaborar um conceito convincente para o personagem Polônio, o conselheiro real da peça Hamlet, de Shakespeare, e sustentá-lo em forma de desenho e com a tipologia dos balões deve ser inicialmente encarado como uma tarefa árdua, na qual se mesclam a propriedade de condensar as múltiplas impressões do estudo da fortuna crítica da peça e a inter
Trab. linguist. apl.. Publicado em: 25/04/2019
-
8. Misvaluation and behavioral bias in the Brazilian stock market
RESUMO O estudo buscou utilizar o modelo desenvolvido por Gokhale et al. (2015) para identificar existência de sobrerreação e vieses comportamentais no mercado de ações brasileiro e analisar seu desempenho como estratégia de investimentos na Bolsa de Valores, Mercadorias e Futuros de São Paulo (BM&FBOVESPA), no curto e longo prazo, bem como testar sua
Rev. contab. finanç.. Publicado em: 2019-03
-
9. Análisis comparativo de las propiedades mecánicas de un material compuesto reforzado con fibras de carbono y las de su matriz polimérica de resina epóxica
ABSTRACT In recent years composite materials have been developed for different applications in engineering areas. This paper first presents the tensile properties of a polymer, in this case an epoxy resin, to be used as the matrix of a fiber reinforced composite material. A study of the mechanical properties is presented, which was carried out by performing
Matéria (Rio J.). Publicado em: 19/07/2018
-
10. Carbothermic reduction of Electric Arc Furnace Dust via thermogravimetry
Abstract Electric Arc Furnace Dust (EAFD) is a solid waste originated from electric steelmaking furnaces. Currently, according to some authors, there is an estimated generation of 15 to 25 kg of dust per ton of steel produced. The formation of the dust is related to the following steps of the process: furnace charge, metal volatilization, iron vaporization u
REM, Int. Eng. J.. Publicado em: 2018-07
-
11. Wall function treatment for bubbly boundary layers at low void fractions
Abstract The present work investigates the role of different treatments of the lower boundary condition on the numerical prediction of bubbly flows. Two different wall function formulations are tested against experimental data obtained for bubbly boundary layers: (i) a new analytical solution derived through asymptotic techniques and (ii) the previous formul
An. Acad. Bras. Ciênc.. Publicado em: 2018-03
-
12. Repeatability of the “flash-replenishment” method in contrast-enhanced ultrasound for the quantitative assessment of hepatic microvascular perfusion
This study aimed to evaluate the feasibility and repeatability of the flash-replenishment method in contrast-enhanced ultrasound (CEUS) perfusion imaging and assess quantitatively microvascular perfusion in the liver. Twenty healthy New Zealand rabbits were submitted to CEUS perfusion imaging with continuous intravenous infusion. Using flash-replenishment ki
Braz J Med Biol Res. Publicado em: 26/02/2018