Autoclave
Mostrando 13-24 de 244 artigos, teses e dissertações.
-
13. Simple and Low-Cost Thermal Treatments on Direct Resin Composites for Indirect Use
Resumo O objetivo deste estudo foi avaliar a influência de três tratamentos térmicos adicionais de baixo custo, disponíveis no consultório dentário, nas propriedades mecânicas, químicas e ópticas de uma resina composta fotoativada indicada para restaurações diretas porém usada como restaurador indireto. A resina composta direta TPH3 (Dentsply) fo
Braz. Dent. J.. Publicado em: 03/06/2019
-
14. Comparative Study on Catalytic Dehydration of Glycerol with Alcohols
A comparative study of glycerol dehydration with alcohols (methanol, ethanol, tert-butyl alcohol) over ion exchange resin Amberlyst-35 was performed. The effect of catalyst amounts (1-15 wt.% to glycerol), reaction temperature (50-100 ºC), reaction time (5-10 h), and the molar ratio of alcohols to glycerol (3:1-8:1) were carried out in 50 mL stainless steel
J. Braz. Chem. Soc.. Publicado em: 2019-04
-
15. Influence of preheating and post-curing on a novel fiber-reinforced composite post material
Abstract The aim of this study was to investigate the influence of preheating and post-curing methods on diametral tensile strength (DTS), flexural strength (FS), knoop microhardness (KHN), and degree of conversion (DC) of an experimental fiber-reinforced composite (FRC). Specimens (30 wt% of 3-mm-short E-glass fiber, 22.5 wt% of methacrylated-based resin an
Braz. oral res.. Publicado em: 29/10/2018
-
16. Biosafety conducts adopted by orthodontists
RESUMO Objetivo: o presente estudo observacional transversal foi delineado para avaliar as condutas de biossegurança adotadas pelos ortodontistas, e as possíveis diferenças em função do tempo de formação. Métodos: tanto as técnicas de esterilização e desinfecção de instrumentais e materiais quanto o uso de equipamentos de proteção individua
Dental Press J. Orthod.. Publicado em: 2018-06
-
17. Biossegurança em serviço de embelezamento: conhecimento e práticas em uma capital do nordeste brasileiro
Resumo OBJETIVO Avaliar o conhecimento e as práticas de biossegurança adotadas por profissionais do segmento da beleza. MÉTODOS Pesquisa descritiva do tipo survey. Foram entrevistados 238 profissionais de serviços de embelezamento entre agosto de 2014 e 2015. As variáveis foram apresentadas por meio de frequências absolutas e relativas, bem como méd
Rev. Gaúcha Enferm.. Publicado em: 21/05/2018
-
18. Influência de um novo método de esterilização na morfologia e propriedades físicas de dentes humanos extraídos
Resumo Introdução Métodos de esterilização adotados em Banco de Dentes Humanos podem promover mudanças estruturais no esmalte e na dentina. Assim, o método ideal deve combinar a eficácia antimicrobiana e a preservação das propriedades biomecânicas do substrato. Objetivo Avaliar a morfologia e propriedades físicas do esmalte e dentina dos dent
Rev. odontol. UNESP. Publicado em: 07/05/2018
-
19. Effect of grinding and aging on subcritical crack growth of a Y-TZP ceramic
Abstract This study aimed to investigate slow crack growth (SCG) behavior of a zirconia ceramic after grinding and simulated aging with low-temperature degradation (LTD). Complementary analysis of hardness, surface topography, crystalline phase transformation, and roughness were also measured. Disc-shaped specimens (15 mm Ø × 1.2 mm thick, n = 42) of a ful
Braz. oral res.. Publicado em: 03/05/2018
-
20. Avaliação da presença de Leishmania infantum em ossos armazenados em glycerol ou esterilizados em autoclave para enxertia óssea cortical
RESUMO Este estudo teve por objetivo avaliar os efeitos da esterilização em autoclave e do armazenamento em glicerol a 85% no osso cortical de cães infectados por Leishmania sp. Foram utilizados 42 cadáveres de cães com leishmaniose. Os cães foram avaliados para a presença de Leishmania sp. em cultura de medula óssea e de osso cortical. Foram coletad
Arq. Bras. Med. Vet. Zootec.. Publicado em: 2018-03
-
21. Effect of Grinding and Multi-Stimuli Aging on the Fatigue Strength of a Y-TZP Ceramic
Resumo Este estudo objetivou investigar o efeito do desgaste e envelhecimento (estímulos combinados) na resistência à fadiga, topografia superficial e transformação de fase de uma cerâmica Y-TZP. Discos para teste de flexão biaxial foram confeccionados segundo as normas da ISO-6872:2008 (15 mm Ø; 1,2 mm espessura) e randomicamente distribuídos de ac
Braz. Dent. J.. Publicado em: 2018-02
-
22. Mechanical behavior of yttria-stabilized tetragonal zirconia polycrystal: Effects of different aging regimens
Abstract This study aimed to characterize and compare the effect of different aging regimens on surface characteristic (topography and roughness), structural stability (phase transformation) and mechanical performance (Weibull analysis) of a Y-TZP ceramic. Discs (15 × 1.2 mm; VITA In-Ceram YZ) were prepared according to ISO 6872-2015 for biaxial flexural st
Braz. oral res.. Publicado em: 07/12/2017
-
23. Evaluation of Out-of-Autoclave (OOA) epoxy system
Abstract Epoxy resins (EP) usually cure in autoclave to minimize resin voids and to achieve the desired resin/fiber ratio. Cure parameters such as temperature, vacuum and pressure levels are controlled and monitored. Aiming time and cost optimization, new out-of-autoclave (OOA) cure processes have been developed lately. This study evaluated the cure cycle an
Polímeros. Publicado em: 2017-12
-
24. Effect of ceramic thickness, grinding, and aging on the mechanical behavior of a polycrystalline zirconia
Abstract Monolithic restorations of Y-TZP have been recommended as a restorative alternative on prosthetic dentistry as it allows a substantial reduction of ceramic thickness, which means a greater preservation of tooth structure. However, the influence of grinding and aging when using a thinner layer of the material is unclear. This investigation aimed to e
Braz. oral res.. Publicado em: 06/11/2017