Sequencing batch reactor operation for treating wastewater with aerobic granular sludge
AUTOR(ES)
Jungles, M. K., Campos, J. L., Costa, R. H. R.
FONTE
Braz. J. Chem. Eng.
DATA DE PUBLICAÇÃO
2014-03
RESUMO
In this work, the performance of a sequencing batch reactor (SBR) on aerobic granular sludge was studied for urban wastewater treatment. The system was inoculated with aerobic activated sludge collected from a wastewater treatment plant and, after 30 days of operation, the first granules observed had an average diameter of 0.1 mm. The biomass concentration reached a maximum value around 4 g VSS L-1, and COD removal and nitrification efficiency achieved stable values of 90%. The predominant oxidizing ammonium bacteria in the granules were identified as Nitrosomonas spp.
Documentos Relacionados
- RESEARCHING NEW WAYS TO REDUCE N2O EMISSION FROM A GRANULAR SLUDGE SEQUENCING BATCH REACTOR TREATING DOMESTIC WASTEWATER UNDER SUBTROPICAL CLIMATE CONDITIONS
- COMBINING A SEQUENCING BATCH REACTOR WITH HETEROGENEOUS PHOTOCATALYSIS (TiO2/UV) FOR TREATING A PENCIL MANUFACTURER'S WASTEWATER
- Simulation and calibration of a full-scale sequencing batch reactor for wastewater treatment
- Enhancement of the performance of an anaerobic sequencing batch reactor treating low-strength wastewater through implementation of a variable stirring rate program
- Reator compartimentado anaerobio/aerobio, tratando esgoto sanitario : desempenho e operação