Mechanical properties of nanocomposite laminated structure and its sensibility to modal analysis procedure
AUTOR(ES)
Duarte, Horácio Valadares, Donadon, Lázaro Valentim, Ávila, Antônio Ferreira
FONTE
Lat. Am. j. solids struct.
DATA DE PUBLICAÇÃO
2014-03
RESUMO
In this work, tensile and shear modulus, as well as Poisson's ratio of a woven orthotropic nanocomposite plate were determined from vibration data. Plates used in the experiment were 16 layers S2-glass/epoxy composite manufactured by vacuum assisted wet layup. The nanocomposite plate was obtained by adding 0%, 1%, 2%, 5% and 10% nanoclays in weight to the epoxy matrix. A Finite Element model of the composite plate combined with a gradient method was applied to obtain an approximate numerical solution to experimental data in order to estimate the mechanical properties. Two different modal procedures were employed: the Laser Anemometry and Hammer test. A modal analysis was made in both cases to determine structural mode shape and associated frequencies, modal and mechanical properties for different nanoclay composite plates, as well as assessing its sensitivity to Modal Analysis.
Documentos Relacionados
- Physical-mechanical properties of laminated bamboo panels
- 3D nanocomposite chitosan/bioactive glass scaffolds obtained using two different routes: an evaluation of the porous structure and mechanical properties
- Nanocomposite of photocurable epoxy-acrylate resin and carbon nanotubes: dynamic-mechanical, thermal and tribological properties
- Mechanical and tribological properties of Ti-containing carbon nanocomposite coatings deposited on TiAlV alloys
- Structure and mechanical properties of polyamide 6/Brazilian clay nanocomposites