Influência do material da ferramenta de corte sobre a usinabilidade do aço ABNT 4340 no torneamento

AUTOR(ES)
FONTE

Matéria (Rio J.)

DATA DE PUBLICAÇÃO

20/05/2019

RESUMO

RESUMO No presente trabalho procurou-se compreender os fenômenos associados à usinagem do aço ABNT 4340 utilizando ferramentas de corte de metal duro e cermet, ambas com geometria do quebra-cavaco para usinagem leve (LP) e média (MP). Nesse sentido, analisou-se a influência da variação do avanço, quebracavaco e o material da ferramenta de corte nos parâmetros de resposta do processo, força de corte, rugosidade, forma do cavaco e análise das superfícies de saída e de folga dos insertos durante a operação de torneamento. Inicialmente, um planejamento fatorial completo 23 foi empregado para análise da força de corte e rugosidade. Em relação à análise da força de corte, a análise de variância (ANOVA) indicou que o material da ferramenta de corte e o avanço afetaram significativamente a força de corte, sendo os menores valores alcançados com a ferramenta de corte cermet e o menor nível de avanço. Quanto à rugosidade Rq, diferentes níveis de materiais de ferramenta ou quebra-cavacos não foram suficientes para alterar significativamente o valor de Rq. Em relação ao cavaco, o avanço e o tipo de quebra-cavaco influenciaram na sua forma. Como última análise, para os parâmetros de corte estabelecidos e percurso de corte, não foi possível identificar desgaste nas ferramentas de corte, no entanto, a análise por EDS apontou a adesão de material nas superfícies de folga e de saída para ambas ferramentas avaliadas.ABSTRACT In the present work the aim was to understand the phenomena associated with the machining of ABNT 4340 steel using carbide and cermet cutting tools, both with chipper geometry for light (LP) and medium machining (MP). In this sense, the influence of the variation of the feed rate, the chip breaker and the cutting tool material on the parameters of process response, shear force, shear strength, chip form and analysis of the outlet and gap surfaces of the inserts during the turning operation. Initially, a complete factorial design 23 was used for analysis of shear strength and roughness. In relation to the shear force analysis, the analysis of variance (ANOVA) indicated that the cutting tool material and the feed significantly affected the cutting force, the lowest values being obtained with the cermet cutting tool and the lowest level of advancement. As for Rq roughness, different levels of tool materials or chip breakers were not sufficient to significantly alter the value of Rq. In relation to the chip, the advance and the type of chipbreaker influenced its shape. As a last analysis, it was not possible to identify wear on the cutting tools, for the established cutting parameters and cut path, however, the EDS analysis pointed to the adhesion of material to the clearance and exit surfaces for both tools evaluated.

Documentos Relacionados