Influencia da reutilização de hidrocoloides reversiveis na alteração linear de modelos de revestimentos utilizados no processo de fundição de proteses parciais removiveis

AUTOR(ES)
DATA DE PUBLICAÇÃO

2002

RESUMO

The aim of this study was to evaluate linear alterations of refractories models obtained by 15 several cycles of heating using two reversible hydrocolloides (HR) (DUPLlCADOR VIPI® and DUPLlCADOR K27®).It was used a metallic master model with four defined points (A, B, C and D) which were linked to permit the measurement of the distances AB, BC, CD, DA, DB and AC. From this model, 10 stone models were obtained and separated in two groups randomized, according to the HR. After this, each model was duplicated with the same HR, according to the manufacturer. The mold was poured with ethyla silicate investment (REFRADEN® and so, the refractories models were obtained. By this methodology, each HR was used for 15 cycles. The respective refractories models obtained at the 1sth, 5th, 10th and 15thfluidification-geleification cycles were measured 3 times at a linear microscope (Mesuring Microscope STM - Olympus®. The averages of the distances were analyzed by ANOVA, Tukey and Dunnett testes (p<0.05).The results showed that the refractories models obtained by VIPI® HR had linear alterations when compared to stone models (control group) in distances AB (1st cycle= - 1.25% and 5th cycle=-1.20%); AD (1st cycle=0.76%, 10th=0.65% and 15th=0.52% cycles); BD (1st cycle=0.58%). According to the results, it can be concluded that although there is a significative difference after using HR for 15 cycles, it is irrelevant due to prosthetic use of HR when making investment model with both commercial types studied

ASSUNTO(S)

reversible hydrocoloid protese dentaria parcial removivel removable partial denture

Documentos Relacionados