Evaluation of erosion-corrosion resistance in Fe-Mn-Al austenitic steels
AUTOR(ES)
Aperador, William Arnulfo, Ruiz, Jorge Hernando Bautista, Betancurt, Juan D.
FONTE
Mat. Res.
DATA DE PUBLICAÇÃO
18/12/2012
RESUMO
In this paper, the effects of Mn and Al against corrosion/errosion resistance of three samples of the Fe-Mn-Al austenitic alloys are evaluated. The samples have composition Fe-(4,9 ~ 11,0 wt. (%)) Al-(17,49 ~ 34,3 wt. (%)) Mn-(0,43 ~ 1,25 wt. (%))C, those were prepared in an induction furnace from high purity materials. The alloys were evaluated in a composed solution of NaCl 0,5 M and Silica in a special chamber and AISI 316 stainless steel as reference material. The electrochemical characterization was performed by Tafel curve polarizations technique. This microstructural characterization was by Scanning Electron Microscopy (SEM). It was observed the significant decrease in the corrosion rate for steels Fermanal with a lower percentage of aluminum and manganese under conditions of dynamic corrosion and erosion-corrosion. SEM allows assessment of the dominant damage mechanisms and corroborated the results obtained by electrochemical measurements.
Documentos Relacionados
- Investigação das características de superplasticidade de um aço do sistema Fe-Mn-Al
- High temperature degradation by erosion-corrosion in bubbling fluidized bed combustors
- Use of Electrochemical Tests for Assessment of the Effect of Erosive Particle Size on the Erosion-Corrosion Behaviour of AISI 304L Austenitic Stainless Steel
- Erosion-corrosion wear of high nitrogen stainless steels in a slurry.
- Erosão, corrosão, erosão-corrosão e cavitação do aço ABNT 8550 nitretado a plasma