COMPARAÇÃO DE DIFERENTES ENSAIOS MECÂNICOS PARA AVALIAR A RESISTÊNCIA ADESIVA A UMA CERÂMICA Y-TZP / COMPARISON OF DIFFERENTS MECHANICAL TESTS TO EVALUATE THE BOND STRENGTH TO A Y-TZP CERAMIC

AUTOR(ES)

Aline Campos Otani

FONTE

IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia

DATA DE PUBLICAÇÃO

23/03/2012

RESUMO

This study aimed to evaluate the bond strength using different test types for bonding evaluation, between a yttrium tetragonal zirconia polycrystals (Y-TZP) ceramic and composite resin, considering two types of Y-TZP surface treatments. Three hundred and sixty Y-TZP blocks, received one of the two surface treatments (N= 180): UT- control (untreated) and SS- silica coating + silanization. Specimen of composite resin were made in different geometries and cemented with resin cement to Y-TZP blocks. The 180 specimens for each surface treatment were divided into six subgroups (n = 30) according to the configuration of bond test: tensile (TBS); microtensile (μTSB); shear (SBS); microshear (μSBS); push-out (PSH) and micropush-out (μPSH). For data analysis were used Weibull parameters, Weibull modulus (m) and resistance characteristic (σ0), to check the dispersion and magnitude of the resistance data, One-way ANOVA test to evaluate the results with normal distribution and Mann-Whitney for those with non-normal distribution. Both the surface treatments type and specimen size showed a statistically significant difference between groups (p = 0.00). Independent of the type of surface treatment, microtensile test and microshear had higher values than their equivalent macro test. On contrary, push-out presented higher values in the macro tests. The tests that showed higher m and σ0, were: PSH, μPSH, μTBS and μSHS. Silica coating + silanization significantly increased bond strength. Push-out, micropush-out, microshear and microtensile tests have proved to be more appropriate for evaluating bond strength, although the microtensile be inapplicable for Y-TZP untreated, due to the impossibility of obtaining the bar shaped specimens during cutting.

ASSUNTO(S)

teste mecânico adesão y-tzp cerâmica odontologia y-tzp ceramics adhesion mechanical test

Documentos Relacionados

• Avaliação da resistência de união de um cimento resinoso a um filme vitrocerâmico depositado em superfície de Y-TZP
• Pre-sintered Y-TZP sandblasting: effect on surface roughness, phase transformation, and Y-TZP/veneer bond strength
• A new approach for Y-TZP surface treatment: evaluations of roughness and bond strength to resin cemen
• Effect of Grinding and Multi-Stimuli Aging on the Fatigue Strength of a Y-TZP Ceramic
• Can low-fusing glass application affect the marginal misfit and bond strength of Y-TZP crowns?