Alumina
Mostrando 13-24 de 959 artigos, teses e dissertações.
-
13. Evaluation of the combined addition of aluminum lactate and calcium carbonate to alumina-based castables
Abstract Calcium aluminate cement (CAC) can induce the development of high green mechanical strength to refractory castables in a short period of time (24 h). However, the production of this hydraulic binder is energy-intensive and releases a large content of carbon dioxide (CO2), which adds to global warming. Thus, aiming to develop an alternative binding s
Cerâmica. Publicado em: 2021-06
-
14. Evaluation of the use of silica-alumina refractory waste as a supplementary cementitious material
Abstract The use of supplementary cementitious materials (SMCs) is one of the three essential factors for the sustainability of the cement industry. To reduce CO2 emissions, several studies have introduced new methods for the utilization of industrial wastes such as the addition into cementitious materials. The objectives of this study were to chemically and
Cerâmica. Publicado em: 2021-06
-
15. Optimization and Study of the Response Surface of Properties for the Synthesis of ZSM-5 Zeolites with Hierarchical Pore Structure Obtained by Desilication
Hierarchical ZSM-5 zeolites were prepared by alkali treatment (desilication) at two temperatures, two reaction times, and two NaOH concentrations. A 23 factorial design was used to study the effect of these variables on the crystallinity, microporosity, and mesoporosity of the zeolite due to the desilication treatment. The factorial design analysis showed th
J. Braz. Chem. Soc.. Publicado em: 2021-06
-
16. Thermal and Catalytic Fast Pyrolysis of Oily Extracts of Microalgae: Production of Biokerosene
Three different microalgae species, Desmodesmus sp., Nannochloropsis oculata and Halamphora coffeaeformis were grown under controlled conditions. The resulting dry biomass was characterized by TG-DTA (thermogravimetry-differential thermal analysis) and extracted with three solvents having different polarities. The extracts gross mass yields varied from 2% us
J. Braz. Chem. Soc.. Publicado em: 2021-04
-
17. Thermal decomposition and reaction sintering for synthesis of mullite-zirconia composite using kaolin, γ-alumina and zirconia
Abstract The refractory materials used in the wall of the furnaces for glass melting can be prepared from mullite-zirconia composite material. The composite of mullite/zirconia was synthesized from Iraqi kaolin, γ-alumina, and zirconia using thermal decomposition with reaction sintering at 1600 °C. Several batches were prepared with various ratios of kaoli
Cerâmica. Publicado em: 2021-03
-
18. Obtenção de cerâmicas de alumina com porosidade graduada processadas pelas técnicas de colagem de barbotina e freeze casting
Resumo O objetivo foi estudar o processamento de materiais cerâmicos de alumina com porosidade graduada a partir das técnicas de freeze casting e colagem de barbotina sequencial, utilizando hidróxido de alumínio como fase de sacrifício. Após conformação, a porosidade foi caracterizada por microscopia eletrônica de varredura, medidas de porosidade ap
Cerâmica. Publicado em: 2021-03
-
19. Protein Removal from Natural Rubber Latex with Fe3O4@Al2O3 Nanoparticle
The presence of protein in the natural rubber latex for the medical device manufacture seems to be the most considered compound due to its allergic effect. Magnetic coated alumina (Fe3O4@Al2O3) has been known as an adsorbent for organic substrates due to its performance through physical and/or chemical interaction. In the current study, we tried to figure ou
J. Braz. Chem. Soc.. Publicado em: 2021-02
-
20. Influence of Mn2+ ions on depression of quartz and spessartine in gondite ore
Abstract Low-grade manganese ores that are composed of manganese oxides, wad, quartz, iron oxides, gibbsite, and especially of spessartine (Mn3Al2(SiO4)3) are known as gondite. Spessartine is a mineral with a high content of silica (SiO2) and alumina (Al2O3) that causes a decrease of the enrichment in manganese oxide concentrates by flotation, giving this o
REM, Int. Eng. J.. Publicado em: 2021-01
-
21. Corrigendum
Abstract Reconciliation plays a key role in controlling and analysing mine operations. It consists in comparing model estimates with actual results produced by the plant, being used as an indicator, a monitoring tool. Discrepancies between these values are common in the mining industry and they highlight problems during processing steps. However, these discr
Braz. J. Psychiatry. Publicado em: 2020-12
-
22. Heat treatment analysis of ASTM A106 steel spheroidization and erosive wear at high temperatures
Abstract The microstructures of steels are altered when exposed to high working temperatures for long periods, which results in varied physical and chemical proprieties. This study evaluates the erosive wear behavior of ASTM A106 steel after it is exposed to high temperatures for long durations. Samples of normalized ASTM A106GrB steel were placed in a muffl
REM, Int. Eng. J.. Publicado em: 2020-12
-
23. Reconciliation of sampling data and heterogeneity analysis of a bauxite mine in Poços de Caldas/MG, in Brazil
Abstract Reconciliation plays a key role in controlling and analysing mine operations. It consists in comparing model estimates with actual results produced by the plant, being used as an indicator, a monitoring tool. Discrepancies between these values are common in the mining industry and they highlight problems during processing steps. However, these discr
REM, Int. Eng. J.. Publicado em: 2020-12
-
24. Design, Synthesis, and Application of Colored Cobalt Pigments (Pink, Blue, Green)
The combination of white or colorless oxides (MgO, Al2O3, ZnO) with colorant ions (Co2+) generates colored pigments (pink, blue, green). The color is caused by the insertion of the colorant ion in the respective crystal lattices (periclase, alumina, wurtzite), as verified by X-ray diffraction. Absorption spectra in the visible region show analogous triplet b
J. Braz. Chem. Soc.. Publicado em: 2020-11