Alloys
Mostrando 1-12 de 917 artigos, teses e dissertações.
-
1. COMPREENDENDO OS MECANISMOS DE CORROSÃO DE LIGAS DE AL-CU-LI: UMA INVESTIGAÇÃO ATRAVÉS DE TÉCNICAS ELETROQUÍMICAS GLOBAIS E LOCAIS
In this study, the corrosion mechanism of an Al-Cu-Li alloy manufactured by two different treatment routes (T3 and T851) was evaluated by immersion and electrochemical tests in solutions containing chloride ions (Cl-). For both alloys, the formation of cavities on the surface was associated with micrometer-sized intermetallics (IM’s), however, in addition
Química Nova. Publicado em: 2022
-
2. On the effect of interrupted ageing (T6I4) on the mechanical properties of AA6351 and AA7050 alloys
Abstract The mechanical properties of age-hardenable aluminum alloys are strongly influenced by the volume fraction, size and spacing of hardening precipitates. In addition, researches have shown that interrupted ageing (T6I4) could benefit the hardening response of these alloys. Interrupted ageing is a term generally used for the microstructural developmen
REM, Int. Eng. J.. Publicado em: 2021-01
-
3. MECANISMO DE EVOLUÇÃO DE HIDROGÊNIO DURANTE A CORROSÃO DA LIGA 2198-T8 EM MEIO CONTENDO CLORETO: UMA ABORDAGEM ELETROQUÍMICA
Corrosion is still one of the most serious and frequent problems in industries. The phenomena involved in the corrosion mechanism of Al-alloys may be explained by formation of galvanic cells between the metal matrix and heterogeneities, such as precipitates, intermetallic phases leading to potential differences and electrochemical reactions. In the cathodic
Quím. Nova. Publicado em: 2020-09
-
4. Effect of Welding Parameters on Nanostructured Fe-(C, B)-(Cr, Nb) Alloys
New nanostructured Fe-(Nb,Cr)-(C,B) multicomponent alloys have been developed for hardfacing application. They have better wear resistance than traditional Fe-Cr-C alloys. The nano-alpha-Fe, eutectic and hard carboborides phases of the weld metal usually show variations with the welding procedure. 6 test samples with different heat input were welded. It was
Mat. Res.. Publicado em: 20/01/2020
-
5. Glass Formation of Null-Matrix Cu-Hf-(Zr, Ti) Alloys
An approach following the null-matrix, Ti/Zr ratio of 2.08, for neutron diffraction was used to calculate the glass formation in Cu-Ti-(Hf,Zr) alloys. The Cu55Zr14.6Ti30.4, Cu61.48Hf18.52Zr6.48Ti13.52, Cu58.1Hf16.9Zr8.1Ti16.9 and Cu52.46Hf14.2Zr10.8Ti22.54 compositions (at. %), were calculated and prepared by argon arc melting. Copper die suction casting was
Mat. Res.. Publicado em: 13/01/2020
-
6. Towards Qualification of Friction Stir Welding to AA5083-O and AA5052-O Aluminum Alloys
Friction Stir Welding (FSW) is an excellent alternative for joining dissimilar and similar materials in comparison to conventional welding processes. In this sense, this work aims at qualifying FSW to similar AA5083-O and AA5052-O aluminum alloys, with 6.35 mm thickness, in a CNC machining center. Therefore, four welding experiments were undertaken. At first
Mat. Res.. Publicado em: 13/01/2020
-
7. Morphology, Crystalline Structure and Chemical Composition Of MAO Treated Ti-15Zr-Mo Surfaces Enriched with Bioactive Ions
In this study, MAO treatment was used to enrich, with bioactive Ca, Mg and P atoms, as-casted and heat-treated Ti-15Zr-xMo (x = 0, 5, 10 and 15 wt%) alloys, for potential use as advanced metallic biomaterials. The chemical composition of the surface was evaluated by EDS and XPS measurements. The morphology and microstructure was analyzed by OM and SEM images
Mat. Res.. Publicado em: 09/12/2019
-
8. NANOESPECTROSCOPIA DE ABSORÇÃO DE RADIAÇÃO SÍNCROTRON NO INFRAVERMELHO PARA NANOESPECIAÇÃO DE PRODUTOS DE CORROSÃO METÁLICA
The understanding of chemical and physical behavior of materials, especially metals and their alloys, is of utmost importance for industrial and technological applications, development of new materials and preservation of cultural heritage. The use of complementary analytical techniques has allowed a better understanding of corrosion mechanisms, and results
Quím. Nova. Publicado em: 05/12/2019
-
9. Analysis of Residual Stress by the Hole-Drilling Method and Hardness in Dissimilar Joints of Austenitic Stainless Steel AISI 316L and Inconel 718 Alloy by Autogenous GTAW Process
Stainless steel and nickel alloy have high corrosion resistance in high-temperature environments due to the high Cr content present in their chemical composition, being widely used in components of nuclear reactors, petrochemical industries, etc. Through proper processes and procedures, it becomes possible to join these alloys. However, this union can genera
Mat. Res.. Publicado em: 02/12/2019
-
10. Microstructure and Thermal Analyses of Cu87-xAl13Nbx High-Temperature Shape Memory Alloys
This paper presents a thermal and microstructural characterization of Cu87-xAl13Nbx (wt%) high temperature shape memory alloys (HTSMA), with Nb contents ranging from 1 to 3%. The alloys were obtained by arc melting under argon atmosphere. Thermal characterization was performed by differential scanning calorimetry (DSC), revealing that the phase martensitic t
Mat. Res.. Publicado em: 28/11/2019
-
11. Thermal Conductivity and Mechanical Properties of As-Cast and As-Extruded Mg-Zn-Mn Alloys
As-cast and as-extruded Mg-[x]Zn-0.3Mn (x=1.5, 2.0 wt.%) alloys were prepared by means of medium-frequency induction-heating technique and extrusion process, respectively. The microstructural characteristics, thermal conductivity and mechanical properties of the samples were characterized. The research results show that the samples are composed of major α-M
Mat. Res.. Publicado em: 25/11/2019
-
12. Systematic review and meta-analysis of welding procedures in one-piece cast implant-supported frameworks
Abstract The objective of this systematic review and meta-analysis was to evaluate the effect of welding techniques on implant-supported prostheses and determine whether they contribute to a better adaptation compared with a one-piece cast. A search was conducted using the PubMed/MEDLINE, Embase, and Cochrane Library databases, and articles published until N
Braz. oral res.. Publicado em: 25/11/2019