Alloy Aa1050
Mostrando 1-6 de 6 artigos, teses e dissertações.
-
1. Effect of casting mode and thermal treatments on the electrical conductivity of the AA4006 aluminum alloy
Abstract Initially studied was the effect of the casting mode on the electrical conductivity of AA4006 aluminum alloy sheets produced by both Twin Roll Casting (TRC) and by the semi-continuous Direct Chill (DC) industrial processes, when compared to sheets with commercial purity (AA1050) and high purity aluminum (AA1199). Then, the effects of heat treatments
REM, Int. Eng. J.. Publicado em: 2017-12
-
2. Simulação computacional, projeto, construção e análise do desempenho de uma matriz para extrusão em canal angular dedicada ao processamento de chapas / Computational simulation, design, construction and performance analysis of an equal channel angular pressing die for the processing of flat billets
The present work describes the design, construction and testing of an equal channel angular pressing (ECAP) die characterized by rectangular cross section channels. The main parameter of the ECAP dies is the geometry of the channels, given by the angle trough which they meet, and the curvature radii at this point. The material employed in the experiments was
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 29/08/2012
-
3. Interdiffusion studies on hot rolled U-10Mo/AA1050
The U-Mo alloys are investigated with the goal to become nuclear material to fabricate high-density fuel elements for high performance research reactors. The enrichment level (20% 235U) suggests that the U-Mo alloys should be between 6 to 10 wt. (%), which can reach up to 9 gU.cm-3 in fuel density. Nevertheless, the U-Mo alloys are very reactive with Al. Int
Mat. Res.. Publicado em: 02/10/2012
-
4. Estudos microestruturais sobre interações químicas na liga U-Mo com Al / Microstructural studies on chemical interactions in U-10Mo alloy with Al
Objetiva-se, com a pesquisa da liga U-Mo, a obtenção de material nuclear para confecção de elementos combustíveis de alta densidade de urânio para reatores de pesquisa de alto desempenho. A política internacional de não proliferação de armas nucleares limita o nível de enriquecimento para reatores de pesquisa em 20% U235. Ligas de U-Mo com 6-10 %
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 01/12/2010
-
5. Estudo comparativo da estampabilidade da liga de aluminio AA1050 partindo de placas obtidas por vazamento direto e bobinas obtidas por vazamento contínuo. / Comparative study of the deep drawing alloy AA1050 from plates obtained by direct casting and coils obtained by continuos casting.
Stampability of aluminum alloys is a subject of interest to several industrial sectors because they are largely used in the fabrication of several parts and components. The choice is based upon the stampability and the relative manufacturing capability in relation to other aluminum alloys that contain larger amounts of alloying elements and, consequently, hi
Publicado em: 2010
-
6. Influence of HEMA content on the mechanical and bonding properties of experimental HEMA-added glass ionomer cements
The purpose of this study was to determine the influence of incrementally added uncured HEMA in experimental HEMA-added glass ionomer cement (HAGICs) on the mechanical and shear bond strength (SBS) of these materials. Increasing contents of uncured HEMA (10-50 wt.%) were added to a commercial glass ionomer cement liquid (Fuji II, GC, Japan), and the compress
Journal of Applied Oral Science. Publicado em: 2009-08