Aircraft
Mostrando 1-12 de 290 artigos, teses e dissertações.
-
1. COST OF AERIAL AND GROUND SPRAYINGS AND TECHNOLOGICAL REPLACEMENT POINT: A CASE STUDY IN THE REGION OF MINEIROS, GO, BRAZIL
ABSTRACT One of the main costs in agriculture is related to mechanized operations, which, in turn, are associated with the capital invested in machinery and equipment, the scale of production, and the operating efficiency. Thus, the choice of technology to carry out these operations must take these factors into account to minimize the production cost. In thi
Eng. Agríc.. Publicado em: 2021-05
-
2. EVALUATION OF THE RADIOMETRIC ACCURACY OF IMAGES OBTAINED BY A SEQUOIA MULTISPECTRAL CAMERA
ABSTRACT Geometric and radiometric corrections of images obtained by remotely piloted aircraft systems (RPAS) are required for the measurement of the spectral reflectance and calculation of vegetation indices. This study aimed to determine which radiometric calibration procedures allow obtaining suborbital images with more accurate reflectance data and spect
Eng. Agríc.. Publicado em: 2020-12
-
3. INNOVATION SYSTEM IN AIR TRANSPORT MANAGEMENT
Abstract Identifying previous research subjects on innovation management in air transport provides not only updated references on new technologies in this industry, but also indicates which areas need to be prioritized in future research. A systematic literature review of publications in this field over the past decade, from 2005 to 2015, including 2016 publ
JISTEM J.Inf.Syst. Technol. Manag.. Publicado em: 02/12/2019
-
4. Impact responses of slender composite plates for bird-strike testing of fan blades
Abstract Bird-strike failure of fan blades is one of the basic challenges for the safety of aircraft engines. Simplified slender blade-like plates are always used to evaluate the impact-induced damage mechanism at design stage. One undesirable issue is the failure at the root of clamped slender plates, which cannot recover the real case of twisted blades. Fo
Lat. Am. j. solids struct.. Publicado em: 04/11/2019
-
5. Review of Power Device for Solar-Powered Aircraft Applications
ABSTRACT This paper reviews various power device components of solar-powered aircraft such as photovoltaic (PV) cells, maximum power point tracker (MPPT) and rechargeable batteries. The various power device components were highlighted, and the ones applicable to aircraft were analyzed, based on criteria as efficiency for photovoltaic cells; energy densities
J. Aerosp. Technol. Manag.. Publicado em: 10/10/2019
-
6. Effect of Aerodynamic Configuration Parameters on Lateral-Directional Stability of Double-Swept Flying Wing Aircraft
ABSTRACT: Poor lateral-directional stability due to the absence of vertical stabilizer is a great risk to the aircraft with flying wing layout. In this paper, an unmanned aerial vehicle with this kind of configuration is chosen as the research object. A three-dimensional model of the unmanned aerial vehicle is established, and then the sensitivity analysis i
J. Aerosp. Technol. Manag.. Publicado em: 09/09/2019
-
7. IDENTIFICATION OF MAIZE LODGING: A CASE STUDY USING A REMOTELY PILOTED AIRCRAFT SYSTEM
ABSTRACT A common agricultural problem in many regions of Brazil is maize lodging, as a consequence of strong winds and rain which impacts on crop growth and yield. However, collecting data using ground-based, manual field measurement methods is inefficient. An emerging tool is the Remotely Piloted Aircraft System (RPAS), capable of delivering spatial data w
Eng. Agríc.. Publicado em: 09/09/2019
-
8. A methodology to investigate the influence of the fillet radius on the buckling of integrally stiffened panels
Abstract The use of integrally stiffened panels (ISP's) in wings of small and medium-sized aircraft is frequent in aviation. These thin-walled structures are often subjected to compressive loads during their life-time and, although the finite element method has become an important tool for engineers to obtain the buckling load of structural members, some res
Lat. Am. j. solids struct.. Publicado em: 22/07/2019
-
9. PHOTOGRAMMETRIC POINT CLOUD CLASSIFICATION BASED ON GEOMETRIC AND RADIOMETRIC DATA INTEGRATION
Abstract The extraction of information from point cloud is usually done after the application of classification methods based on the geometric characteristics of the objects. However, the classification of photogrammetric point clouds can be carried out using radiometric information combined with geometric information to minimize possible classification issu
Bol. Ciênc. Geod.. Publicado em: 10/07/2019
-
10. A Review of Using Conductive Composite Materials in Solving Lightening Strike and Ice Accumulation Problems in Aviation
ABSTRACT: There are many problems facing aircraft in the air during flight, such as lightning strikes and ice accumulation on aircraft surfaces. These problems usually reduce aircraft efficiency and lead to serious accidents and fatalities. However, the current protection systems used to solve these problems of aircraft represent excessive energy usage, a ha
J. Aerosp. Technol. Manag.. Publicado em: 28/03/2019
-
11. Continuous positive pressure on aircraft in neonates: care provided by the nursing team
RESUMO Objetivo: Descrever os cuidados de enfermagem ao neonato em pressão positiva contínua nas vias aéreas (CPAP) com pronga, analisando-os à luz da sistematização da assistência/processo de enfermagem. Método: Pesquisa descritiva, abordagem qualitativa. Foram entrevistados 30 profissionais de enfermagem das unidades de terapia intensiva e interm
Esc. Anna Nery. Publicado em: 21/03/2019
-
12. Analytical determination of the critical impact location for wing leading edge under birdstrike
Abstract The wing leading edge is one of the aircraft structures which are vulnerable to birdstrike. Therefore, Federal Aviation Regulation has clear requirements of anti-birdstrike performance for wing leading edge. However, the impact location is not specified in aviation regulation. The forefront of the wing leading edge is selected as a critical location
Lat. Am. j. solids struct.. Publicado em: 04/02/2019