Acrylic Resin
Mostrando 1-12 de 239 artigos, teses e dissertações.
-
1. Lignin-modified road marking paint: weathering aging studies
Abstract The accelerated artificial aging with ultraviolet radiation, viscosity, density, no-pick-up time, flexibility, and abrasion resistance of lignin-modified road marking paint were evaluated. The addition of lignin did not cause significant changes in the physical chemistry, flexibility and no-pick-time test compared to the precursor paint. The additio
REM, Int. Eng. J.. Publicado em: 2021-06
-
2. Evaluation of the physical and antifungal effects of chlorhexidine diacetate incorporated into polymethyl methacrylate
Abstract This study aimed to evaluate the physical properties and antifungal activities of polymethyl methacrylate (PMMA) acrylic resins after the incorporation of chlorhexidine diacetate salt (CDA). Methodology: First, acrylic resin specimens were fabricated with Vipi Cor® and DuraLay® resins with and without the incorporation of 0.5%, 1.0% or 2.0% CDA.
J. Appl. Oral Sci.. Publicado em: 10/01/2020
-
3. Influence of a Retentive Shoulder Design to Prevent Early Failure of Three Core Build-Ups
Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclus
Braz. Dent. J.. Publicado em: 28/11/2019
-
4. The effect of nanodiamonds on candida albicans adhesion and surface characteristics of PMMA denture base material - an in vitro study
Abstract Candida albicans is the main causative pathogen of denture stomatitis, which affects many complete denture patients. Objective: To evaluate the effect of different concentrations of nanodiamonds (NDs) added to polymethyl methacrylate (PMMA) denture base material on Candida albicans adhesion as well as on surface roughness and contact angle. Methodol
J. Appl. Oral Sci.. Publicado em: 04/11/2019
-
5. Effect of immersion in various disinfectant solutions on the properties of a heat-cured acrylic resin
RESUMO Objetivo: Avaliar a influência da imersão em diferentes soluções desinfetantes na microdureza e rugosidade de uma resina acrílica de termoativação. Métodos: Corpos de prova de resina acrílica termopolimerizável foram imersos em água destilada, vinagre comercial de uso doméstico, hipoclorito de sódio e peróxido de hidrogênio, por perí
RGO, Rev. Gaúch. Odontol.. Publicado em: 28/10/2019
-
6. Fracture strength of monocrystalline and polycrystalline ceramic brackets during archwire torque
Resumo Introdução A demanda por tratamentos estéticos tem crescido nos últimos anos, sendo cada vez mais forte a preocupação com a estética por parte dos pacientes que buscam o tratamento ortodôntico. Objetivo Este estudo avaliou a resistência à fratura de bráquetes cerâmicos monocristalinos e policristalinos de diferentes fabricantes quando su
Rev. odontol. UNESP. Publicado em: 03/10/2019
-
7. Effect of techniques, trays and materials on accuracy of impressions clinically made
Resumo Introdução Realizar moldagens precisas e dimensionalmente estáveis que dupliquem a condição oral é um passo essencial para a confecção de restaurações indiretas de qualidade, garantindo seu sucesso e longevidade. Diversos estudos tem demonstrado os prós e contras de diferentes técnicas de moldagem, mas nenhum consenso da melhor técnica a
Rev. odontol. UNESP. Publicado em: 23/09/2019
-
8. Biomechanical development and evaluation of a new framework for all-on-four rehabilitation
Resumo Introdução Para reabilitação de mandíbulas totalmente edêntulas, a opção por carga imediata determina a utilização de próteses provisórias que esplintem os implantes instalados. Apesar de provisórias com reforço proverem as reabilitações com benefícios biomecânicos, a não adoção desta indicação coexiste em diferentes estudos so
Rev. odontol. UNESP. Publicado em: 29/07/2019
-
9. Toughening of bio-PE upon addition of PCL and PEgAA
Abstract Researches of polymer blends based on biological and biodegradable polymers appear as a viable alternative to develop environmentally friendly materials. Therefore, the aim of this research was to produce compounds made with biological polyethylene, i.e., Biopolyethylene, Bio-PE, added to the biodegradable Polycaprolactone (PCL) and functionalized b
REM, Int. Eng. J.. Publicado em: 19/06/2019
-
10. Antifungal efficiency of chemically and thermally-activated acrylic resins after surface treatment using poly (diallyldimethylammonium chloride)
Abstract INTRODUCTION: Acrylic resins are used in the preparation of facial prostheses and may be colonized by fungi. Here, we verified the antifungal efficacy of this material after surface treatment using poly (diallyldimethylammonium chloride). METHODS: Acrylic resin specimens with and without surface treatment were subjected to tests for fungistatic an
Rev. Soc. Bras. Med. Trop.. Publicado em: 30/05/2019
-
11. COATING PERFORMANCES OF CRIMEAN JUNIPER (Juniperus excelsa M. BIEB.) WOOD
ABSTRACT The purpose of this study is to determine the varnish layer hardness and varnish adhesion strength of the varnished Crimean juniper (Juniperus excelsa M. Bieb.) wood growing naturally in the Kastamonu region of Turkey. Test samples were varnished with UV-resistant polyurethane alkyd resin high gloss varnish (PAV) and water-based acrylic resin gloss
CERNE. Publicado em: 20/05/2019
-
12. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019