Acrylic Cement
Mostrando 1-12 de 30 artigos, teses e dissertações.
-
1. Influence of a Retentive Shoulder Design to Prevent Early Failure of Three Core Build-Ups
Resumo Este estudo avaliou a influência de um preparo retentivo em forma de ombro para prevenir a falha precoce de núcleos de preenchimento realizados em molares com 3 diferentes tipos de resina composta. Noventa e seis terceiros molares superiores hígidos extraídos de humanos, foram divididos em dois grupos (n=48) de acordo com o tipo de redução oclus
Braz. Dent. J.. Publicado em: 28/11/2019
-
2. Effect of hydrofluoric acid concentration and etching time on resin-bond strength to different glass ceramics
Abstract: The objective of this study was to evaluate the effect of the hydrofluoridric acid (HF) concentration and time of acid conditioning on bond strength of three glass ceramics to a resin cement. Thus, fifty blocks (10 mm x 5 mm x 2 mm) of each ceramic (LDCAD: IPS e.max CAD; LCAD: IPS Empress CAD and LDHP: IPS e.max Press) were made and embedded in acr
Braz. oral res.. Publicado em: 16/05/2019
-
3. Effect of different composite core materials on fracture resistance of endodontically treated teeth restored with FRC posts
Abstract Objective This study evaluated the fracture resistance of endodontically treated teeth restored with fiber reinforced composite posts, using three resin composite core build-up materials, (Clearfil Photo Core (CPC), MultiCore Flow (MCF), and LuxaCore Z-Dual (LCZ)), and a nanohybrid composite, (Tetric N-Ceram (TNC)). Material and Methods Forty en
J. Appl. Oral Sci.. Publicado em: 2017-04
-
4. Physical and mechanical characterization of a porous cement for metaphyseal bone repair
OBJECTIVE: Macroporous cement with mechanical properties similar to cancellous bone may improve the treatment of large bone defects in relation to solid acrylic cement. The aim of this study was to compare physical and mechanical characteristics of a polymethyl methacrylate (PMMA) based porous cement with cancellous bone. METHODS: Compressive strength and p
Acta ortop. bras.. Publicado em: 2015-08
-
5. Evaluation of shear bond strength of two resin-based composites and glass ionomer cement to pure tricalcium silicate-based cement (Biodentine®)
Objectives: Tricalcium silicate is the major constituent phase in mineral trioxide aggregate (MTA). It is thus postulated that pure tricalcium silicate can replace the Portland cement component of MTA. The aim of this study was to evaluate bond strength of methacrylate-based (MB) composites, silorane-based (SB) composites, and glass ionomer cement (GIC) to
J. Appl. Oral Sci.. Publicado em: 2014-07
-
6. Study of hygral behavior of non-asbestos fiber cement made by similar hatschek process
Fiber cement, similarly to all cementitious materials, undergoes dimensional and volumetric changes when it is exposed to dry and wet environments. When exposed to natural weathering, cement-based materials absorbs and may also release water to their surroundings via a very complex inherent pore structure. In this work initialized a few years ago, some prope
Mat. Res.. Publicado em: 05/11/2013
-
7. Microstructural and topographic characterization of concrete protected by acrylic paint
Concrete structures must be designed and constructed so as to resist the conditions established in the project design and suffer no deterioration for many years. In highly aggressive environments, in addition to the minimum layer covering the framework, the concrete must receive a protective coating. In this work, the efficiency of acrylic paint as a protect
Mat. Res.. Publicado em: 22/03/2013
-
8. Influence the translucence of glass fiber posts and time of photoactivation of a dual cement bond strength to root dentin / INFLUÊNCIA DA TRANSLUCIDEZ DE PINOS DE FIBRA DE VIDRO E TEMPO DE FOTOATIVAÇÃO DE UM CIMENTO DUAL NA RESISTÊNCIA DE UNIÃO À DENTINA RADICULAR
The aim of this study was to evaluate in vitro through the push-out test, if the use of opaque glass fiber posts (Exacto Angelus [PO]) and translucent (Exacto Translucent Angelus [PT]), adhesively cemented into the root with dual resin cement (Variolink II - Ivoclar Vivadent) under different polymerization time had an influence on the bond strength in three
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 27/02/2012
-
9. Avaliação da customização por desgaste de pinos pré-fabricados de fibra de vidro / Evaluation of fibre posts submitted to customization of the apical portion
The purpose of this study was to evaluate fibre posts (White Post DC/FGM) submitted to customization of the apical portion. Experiment 1: 5 #4 posts were divided into five groups (G) and submitted to different custom adaptation treatments: GA no surface treatment, GB- industrial shaping tool (Dentsply), GC- #3195 fine diamond bur (KG Sorensen), GD- medium-gr
IBICT - Instituto Brasileiro de Informação em Ciência e Tecnologia. Publicado em: 25/01/2012
-
10. Influence of radiopacifying agents on the solubility, pH and antimicrobial activity of portland cement
The aim of this study was to evaluate the interference of the radiopacifiers bismuth oxide (BO), bismuth carbonate (BC), bismuth subnitrate (BS), and zirconiun oxide (ZO) on the solubility, alkalinity and antimicrobial properties of white Portland cement (WPC). The substances were incorporated to PC, at a ratio of 1:4 (v/v) and subjected to a solubility test
Braz. Dent. J.. Publicado em: 2012-10
-
11. Eroded dentin does not jeopardize the bond strength of adhesive restorative materials
This in vitro study evaluated the bond strength of adhesive restorative materials to sound and eroded dentin. Thirty-six bovine incisors were embedded in acrylic resin and ground to obtain flat buccal dentin surfaces. Specimens were randomly allocated in 2 groups: sound dentin (immersion in artificial saliva) and eroded dentin (pH cycling model - 3× / cola
Brazilian Oral Research. Publicado em: 19/06/2012
-
12. Production of bone cement composites: effect of fillers, co-monomer and particles properties
Artificial bone cements (BCs) based on poly(methyl methacrylate) (PMMA) powders and methyl methacrylate (MMA) liquid monomer also present in their formulation small amounts of other substances, including a chemical initiator compound and radiopaque agents. Because inadequate mixing of the recipe components during the manufacture of the bone cement may compro
Brazilian Journal of Chemical Engineering. Publicado em: 2011-06