Absorber
Mostrando 1-12 de 96 artigos, teses e dissertações.
-
1. Investigate the Effect of Dielectric Properties on Microwave Absorption of Pyramidal Microwave Absorber
Abstract This paper presents an analysis of the impact of various dielectric properties material’s effects on broadband pyramidal microwave absorbers (PMA). The Computer Simulation Technology (CST) studio software simulates and analyzes the PMA over 0.7 GHz to 30 GHz frequency range. To achieve the best reflectivity performance of the PMA, different types
Journal of Microwaves, Optoelectronics and Electromagnetic Applications. Publicado em: 2022
-
2. Wavelength-Selective Near Unity Absorber Based on Fabry-Pérot Nanoresonators
Abstract We proposed and analyzed a planar narrow-band absorber based on a bi-layer metal/dielectric structure. The planar absorber uses the Fabry-Pérot resonance and the inherent loss of the metals, for maximum light absorption in the range of the electromagnetic spectrum visible to the near infrared. The absorption resonance peak can be shifted to other r
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
3. Proposed Technique of Analysis for Absorber/Transmitter Frequency Selective Surfaces
Abstract In this paper, we propose a simple technique to analyze absorber/transmitter frequency selective surfaces (FSS). The structure is formed by two FSS, one resistive and one conductive. Both FSS are printed on an FR4 dielectric substrate. The square loop and crossed dipole are the geometries considered in this paper. The technique combines two simple a
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-06
-
4. PARAMETERS FOR MODELING PASSIVE SUSPENSIONS OF SPRAY BARS
ABSTRACT The uniformity and quality of spraying depend on the stability of the spray boom, defined as the suspension system between the boom and the machine chassis. This paper presents a procedure for improving the performance of passive spray bar suspensions through parameter adjustment. Two multibody dynamics models of a tractor sprayer set were developed
Eng. Agríc.. Publicado em: 2021-05
-
5. Passively Q-Switched Pulses Generation from Erbium-Doped Fiber Laser Using Lutetium Oxide as Saturable Absorber
Abstract In this paper, a configuration of a passive Q-switched Erbium-doped fiber laser (EDFL) using a Lutetium Oxide (Lu2O3) thin film as a saturable absorber (SA) is experimentally implemented to generate high pulse energy with a high signal to noise ratio. A stable Q-switched pulse train is initiated at the input pump power of 30.442mW, and a maximum pul
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 2021-03
-
6. MODELING AND SIMULATION OF A VACUUM MEMBRANE DISTILLATION PLANT COUPLED WITH SOLAR ENERGY AND USING HELICAL HOLLOW FIBERS
Abstract This paper investigates the effect of operating conditions such as coil pitch, fiber diameter, distance between fiber and absorber internal wall and absorber diameter for a vacuum membrane installation coupled with solar energy and using helically coiled fiber to maximize the permeate flow rate. The model is based on a system of equations composed o
Braz. J. Chem. Eng.. Publicado em: 09/12/2019
-
7. Review: deformation and optimisation crashworthiness method for foam filled structures
Abstract In this paper, we give overview of deformation modes for the uniform foam filled thin-walled structure such as circular tubes, square tubes, rectangular tubes, tapered tubes, hat tubes and cone tubes. Foam material is used as a reinforcing material on a thin wall tube which has potential as being a good energy absorber. This is evident from many of
Lat. Am. j. solids struct.. Publicado em: 22/08/2019
-
8. Vibration control device for steel tubular towers of Horizontal Axis Wind Turbines
Abstract This paper presents and discusses the design of a vibration control device for a 120 m high steel tubular tower of onshore Horizontal Axis Wind Turbine (HAWT). The tower is modeled using beam (own code), and shell and solid finite elements (via ANSYS). The Dynamic Vibration Absorber (DVA) is designed to be attached to the tower top, aiming to analyz
Lat. Am. j. solids struct.. Publicado em: 10/07/2019
-
9. OPTIMIZATION OF DYNAMIC VIBRATION ABSORBERS BASED ON EQUAL-PEAK THEORY
Abstract The present paper proposes a new procedure to determine the optimal parameters of a dynamic vibration absorber (DVA), considering both damped and undamped primary system. The DVA design is formulated as an optimization problem in which the objective function is constructed based on Den Hartog's equal-peak method. The DVA parameters are selected to m
Lat. Am. j. solids struct.. Publicado em: 25/04/2019
-
10. The Effect of Red Pigment and Photo Stabilizers on the Photo Degradation of Polypropylene Films
The aim of this work was to evaluate the photo degradation of PP films containing photo stabilizers, a ultraviolet absorber and a hindered amine light stabilizer (HALS), and a red pigment. The films were produced by extrusion and exposed to the UV radiation in the laboratory for up to 15 weeks. The results obtained from FTIR, UV-vis and colorimetry showed th
Mat. Res.. Publicado em: 11/04/2019
-
11. Selective Solar Surface Solar Based on Black Chromium: Influence of Electrodeposition Parameters in the Absorption of Surfaces
The search for the reduction of costs for the implementation of renewable energies implies in the optimization of the parameters of the manufacturing processes of consolidated technologies. Among these technologies are the solar collectors composed of absorber films characterized by high absorption in the spectrum range corresponding to solar radiation and l
Mat. Res.. Publicado em: 25/02/2019
-
12. Fast Optimization of Tuned Mass-Spring Arrangement for Reduction of Acoustic Power Radiation of Submerged Ribbed Cylinder
Abstract In this paper, acoustic power radiation of a submerged finite length ribbed cylinder subject to a harmonic point load is minimized by a new fast scheme. For this purpose, two arrangements of non-uniformly distributed sequential point masses and mass springs attached on stiffening ribs of the cylinder are used to optimally reduce the acoustic power r
Lat. Am. j. solids struct.. Publicado em: 04/02/2019