3d Numerical Analysis
Mostrando 1-12 de 101 artigos, teses e dissertações.
-
1. Chronic Obstructive Pulmonary Disease: The Role of Myocardial Deformation Indices and Right Ventricle Three-Dimensional Echocardiography
Abstract Background: Right ventricular dysfunction is a major complication in chronic obstructive pulmonary disease (COPD) and, despite its prognostic implications, is rarely considered in routine clinical analysis. Objectives: To compare RV function variables with standard and advanced echocardiographic techniques in patients with stable COPD and controls
International Journal of Cardiovascular Sciences. Publicado em: 2022
-
2. Rheology of mine tailings deposits for dam break analyses
Abstract This article deals with the rheology of tailings deposits related to dam break analysis. The material used was a fine tailings from iron ore processing. Geotechnical and rheological characterization of these tailings were performed. The rheological characterization consisted of rotational and oscillatory tests. It was observed that the rheological p
REM, Int. Eng. J.. Publicado em: 2021-06
-
3. Study of the interaction of concrete walls with the foundation structure
Abstract This article presents a study of the factors that influence the mechanism of soil-structure interaction with a pilot building having concrete walls and their impact on their performance. To illustrate the studies carried out, a numerical modeling of a four-floor concrete wall pilot building was performed, subjected to vertical actions, supported by
REM, Int. Eng. J.. Publicado em: 2021-06
-
4. Mechanical Mechanism Analysis and Influencing Factors of Subway Cross Passage Construction
Abstract The construction of the cross passage changes the main tunnels segment from a complete cylindrical structure to a notched unstable stressed structure. Thus, the overall force (bending and shearing) performance of the main tunnels is considerably decreased. The excavation of the cross passage also destroys the stability of the original soil layer and
Lat. Am. j. solids struct.. Publicado em: 01/07/2019
-
5. Study and Optimization of Raman Amplifiers in Tellurite-Based Optical Fibers for Wide-Band Telecommunication Systems
Abstract Here we present a numerical analysis and the optimization of a multi-pump discrete Raman amplification system based on the use of a Tellurite optical fiber as the gain media. By using previously reported optimization techniques we were able to exploit the high Raman gain of Tellurite optical fibers and its multipeak spectrum to achieve amplification
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
6. A New Technique Using Axially Slotted Microstrip Line for Antenna Impedance Matching Designs
Abstract A new technique is presented for designing microstrip patch antennas with very good input impedance matching. The analysis is carried out for 1.78 GHz, 2.42 GHz and 3.46 GHz rectangular patch antennas printed on low-cost fiberglass substrates (FR-4), mounted on a ground plane and fed by a microstrip line. The antenna impedance matching is obtained u
J. Microw. Optoelectron. Electromagn. Appl.. Publicado em: 19/06/2019
-
7. A computational framework for predicting onset and crack propagation in composite structures via eXtended Finite Element Method (XFEM)
Abstract The eXtended Finite Element Method (XFEM) has been reliably used for analyzing crack growth in 3D structural elements over last years. In fact, many researchers have worked in this field, but it is scarce to find scientific contributions about 3D XFEM models applied to the failure of non-standard composite parts, such as tapered structures and thick
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
8. Analysis of sensor placement in beams for crack identification
Abstract A previous study has shown that the mode shapes of a beam are more sensitive to damage than other vibrational parameters, thus making them better suited for crack identification purposes. However, they have the disadvantage of being more difficult to be measured. To overcome this difficulty, an interesting idea is to monitor changes produced by crac
Lat. Am. j. solids struct.. Publicado em: 29/10/2018
-
9. Sensitivity analysis of 3D frictional contact with BEM using complex-step differentiation
Abstract This paper presents a study of the complex step differentiation method applied to a parameter sensitivity analysis for 3D elastic contact problem. The analysis is performed with the Boundary Element Method (BEM) using discontinuous elements and the Generalized Newton Method with line search (GNMls). A standard BEM implementation is used and the cont
Lat. Am. j. solids struct.. Publicado em: 22/10/2018
-
10. Strength analysis of composite cables
Abstract Carbon Fiber Reinforced Polymer (CFRP) cables, due to their outstanding performance in terms of specific stiffness and strength, are usually found in civil construction applications and, more recently, in the Oil & Gas sector. However, experimental data and theoretical solutions for these cables are very limited. On the contrary, several theoretica
Lat. Am. j. solids struct.. Publicado em: 04/06/2018
-
11. Theoretical Approach to Simulate Efficient Selective Solar Absorbers With Micro or Nano Structured Arrays
Study of the solar absorber with photonic crystal or micro structures as the heat absorbing surfaces operated at a high-temperature was conducted. Numerical calculations based on rigorous coupled-wave analysis were performed to determine the absorptance of the photonic crystal surface on the absorber. The effect of nano geometry of the photonic crystal in tu
Mat. Res.. Publicado em: 22/03/2018
-
12. Finite Element Analysis of Reinforced Concrete Beam-Column Connections with Governing Joint Shear Failure Mode
Abstract Reinforced concrete (RC) beam-column connections especially those without transverse reinforcement in joint region can exhibit brittle behavior when intensive damage is concentrated in the joint region during an earthquake event. Brittle behavior in the joint region can compromise the ductile design philosophy and the expected overall performance of
Lat. Am. j. solids struct.. Publicado em: 2017-08